DBX 160X - 120V to 240V Conversion

An audio community like no other.

Moderators: rick, Mark Bassett

DBX 160X - 120V to 240V Conversion

Postby Kris » Sat Jan 28, 2006 6:54 pm

Is this possible? Internally perhaps, just don't want a big wall wart.
Kris
 

Postby retrovox » Sun Jan 29, 2006 12:34 pm

According to the circuit diagram at <http://www.wiseguysynth.com/larry/schematics/dbx_vca/dbx160x_schematic_mono.pdf> , the power transformer has a 115/230 VAC primary selectable by S1. Don't know if this is an internal or panel mounted switch. Perhaps this switch was only fitted on export models, and domestic US models omitted this switch.
retrovox
Registered User
Registered User
 
Posts: 9
Joined: Sun Jan 29, 2006 12:18 pm
Location: wagga wagga

Postby peter_nz » Mon Feb 13, 2006 1:31 pm

I have a US and Japanese version,both have a switch on back to change from 110 to 230.
Maybe above the power lead?Red?
peter_nz
Registered User
Registered User
 
Posts: 15
Joined: Fri Jun 03, 2005 10:56 pm
Location: Auckland New Zealand


Return to The Turtlerock Forum

Who is online

Users browsing this forum: No registered users and 1 guest


cron