MXP-3000 power loom

An audio community like no other.

Moderators: rick, Mark Bassett

MXP-3000 power loom

Postby tonymite » Tue Jun 07, 2005 5:37 pm

Upon recieving my MXP-3000, i found that the mains power loom is missing & I only have the 35ft automation loom ([b] which i have no power supply for - If anyone has a +/- 18v and +/- 8 or 9v power supply .giers a yell )[/b] ... which I have cut in half to use for mains power - problem is... main power has 2x 15 pin CinchJones outputs ( audio & prerpheral). One is 7 core ( I can use the chopped off excess from automation loom - they are the same ... BUT one is 9 core.

Can anyone recomend where I'd find this type of 9core cabel/loom rated approx 15-20A and about 2.5mm ???

Rick,Rob,Otto ... anyone ???
tonymite
Registered User
Registered User
 
Posts: 134
Joined: Tue Jun 07, 2005 5:28 pm
Location: Melbourne AU

Postby tonymite » Wed Jun 08, 2005 12:51 am

carn fellas ...
tonymite
Registered User
Registered User
 
Posts: 134
Joined: Tue Jun 07, 2005 5:28 pm
Location: Melbourne AU

Postby ottowr » Wed Jun 08, 2005 1:35 pm

You can get suitable multiple core cable from any electrical trade supplier, e.g. Auslec, Turks, L & H etc.

The connectors you'll have to get from Farnell, RS or another electronic component supplier, or Sony.
ottowr
TRM Endorsed
TRM Endorsed
 
Posts: 23
Joined: Sat May 07, 2005 1:53 pm
Location: Sydney


Return to The Turtlerock Forum

Who is online

Users browsing this forum: Bing [Bot] and 2 guests