Where to buy racks like this in Australia?

An audio community like no other.

Moderators: rick, Mark Bassett

Where to buy racks like this in Australia?

Postby mistersully » Thu Jun 25, 2015 8:03 pm

http://www.custom-consoles.com/images/S ... k-rack.jpg

Can't seem to get the pic to work but ^ that's it

I want something i can just swing my chair around and tweak gear without having to bend too far

Cheers
Dave Graham

melbourne
mistersully
Registered User
Registered User
 
Posts: 30
Joined: Thu Mar 24, 2011 8:31 am

Re: Where to buy racks like this in Australia?

Postby mistersully » Thu Jun 25, 2015 8:24 pm

I've just found that same rack at awave for $699. I'd want two of them, so looking for something a bit cheaper if it's out there.
Dave Graham

melbourne
mistersully
Registered User
Registered User
 
Posts: 30
Joined: Thu Mar 24, 2011 8:31 am

Re: Where to buy racks like this in Australia?

Postby a.beck » Sat Jun 27, 2015 11:50 am

You could probably knock something up in SketchUp and have it made for less than that. I'm getting a relatively involved full studio desk made for under 2k at the moment from a custom joinery shop in Gosford. It shouldn't be too hard to find someone to do it down there.
_____________________
Andrew Beck
The Back 45
Erina
User avatar
a.beck
Registered User
Registered User
 
Posts: 146
Joined: Fri Mar 12, 2010 2:38 pm
Location: Sydney

Re: Where to buy racks like this in Australia?

Postby Analogaudioguy » Mon Jul 20, 2015 4:20 pm

You could try these guys..
http://www.ultrafonic.com.au/Shop/file/ ... niture.htm
Cheers, Bruce
Bruce Maddocks
Old time audio dude
OST Mastering
Analogaudioguy
Registered User
Registered User
 
Posts: 62
Joined: Wed Apr 30, 2014 10:02 am

Re: Where to buy racks like this in Australia?

Postby bangaroo » Tue Jul 21, 2015 2:43 pm

Home made doesn't cost a lot of cash - more in time tho.
I'm finishing off the desk attached, made from a table top found on the side of the road and a couple of lengths of unfinished 4 b 2 from Bunnings.
It's cost less than $150 so far including rack strip, paint & fabric for the arm rest. Like me, it's nothing clever, just tech screws n glue.

Rob
You do not have the required permissions to view the files attached to this post.
Rob Hardy
bangaroo
Registered User
Registered User
 
Posts: 20
Joined: Mon May 10, 2010 8:56 pm
Location: Sydney


Return to The Turtlerock Forum

Who is online

Users browsing this forum: No registered users and 1 guest


cron