Custom wiring SSS Strat - comments please

Are you building something? Share your resources with the locals - for more in depth D.I.Y. head to The Lab

Moderators: rick, Mark Bassett

Custom wiring SSS Strat - comments please

Postby chrisp » Wed Jan 17, 2018 12:11 pm

So I have three single coil pickups (N M B), and for controls a selector switch space, 3 pots and 3 slider switches (DPDT). I play pop, surf, rock, blues and rhythm jazz, roughly in that order. I am thinking of wiring along the lines -

Selector - use tele 4 pos switch to get N, NB in parallel, NB in series, and B.
My three switches then would control the MID pickup's connection-
MID Off/On, MID Polarity Reverse and MID Solo (which cuts out the N and B signals).

Pots - basically Leo Fender's PTB (passive treble bass) set up, but each pot being a SPDT push / pull where
VOL push = 250K pull = 1M value: in effect, a warm/bright switch
TREBLE CUT push = 22nf cap pull = diode clipping: in effect a LPF / brown tone switch
BASS CUT push = 3.3nf (gentle) pull = 1.5nf (rabid): gives different depth of bass cut for surf vs distortion effects

That gives 13 pickup combinations and 8 controllable tone options, over 100 tones in all. Of which about 10 are likely to be useable and then its up to the skill of the player and the sound of the amp!

I also usually do the GuitarNuts thing of star grounding the signal cold (-) wires and isolating them from earths (like the trem, pickup claws and pot bodies) using a 330nf cap.

Pickups ATM are AGI Don Lace N-150 and S-150 with SD Vintage Rails at the bridge. Tempted to move the rails to the neck and put in a SD Antiquity II Surf at the bridge, that will need to wait awhiles.
Last edited by chrisp on Thu Jan 18, 2018 6:40 pm, edited 3 times in total.
Chris Preston
The man who gives meaning to the word amateur
User avatar
chrisp
Registered User
Registered User
 
Posts: 114
Joined: Wed Apr 08, 2015 7:55 pm
Location: Sunny warm Canberra

Re: Custom wiring SSS Strat - comments please

Postby chrisp » Wed Jan 17, 2018 3:41 pm

(amended first post to include this information)
Chris Preston
The man who gives meaning to the word amateur
User avatar
chrisp
Registered User
Registered User
 
Posts: 114
Joined: Wed Apr 08, 2015 7:55 pm
Location: Sunny warm Canberra


Return to D.I.Y.

Who is online

Users browsing this forum: No registered users and 2 guests