Page 1 of 1

Help with identifying connector. IC socket style.

PostPosted: Wed Jul 31, 2013 8:30 pm
by Futureman
Hey all.

I need some help with identifying a connector.

Imagine a ribbon cable going into an IC.. That's it.

I realize it's an IDC style (insulation displacement connector) and the pitch is 2.54mm (0.1"), but I'm having no luck finding this style in mouser..

Any thoughts?

I need 16 way, preferably gold plated.

Regards,
Mike

Re: Help with identifying connector. IC socket style.

PostPosted: Thu Aug 01, 2013 5:07 pm
by rob
Jaycar ( of all places ) used to sell these. But I can't see them in the current catalog. I have a couple here if you get stuck. They are in my AMS repair kit...

Re: Help with identifying connector. IC socket style.

PostPosted: Thu Aug 01, 2013 8:04 pm
by Thirteen
I used to get them from Jaycar too, 16 pin DIP headers. I hope they still have them, I need a bunch to fix up my AMS delay so I can sell it!

Re: Help with identifying connector. IC socket style.

PostPosted: Thu Aug 01, 2013 10:24 pm
by Futureman
http://au.mouser.com/ProductDetail/Kobi ... jKQiu6o%3d

Mouser has em, in gold.

I've used X-on.com.au to purchase mouser for a flat rate of $15 postage.

I've got 2 or 3 in my stash, but i need to replace a few in this Arp Quadra.

Steve, if you need a handful, I can order from X-On and we can split it..

Regards,

Re: Help with identifying connector. IC socket style.

PostPosted: Thu Aug 01, 2013 10:29 pm
by Thirteen
Sure, did you see a price? I need 22 of them but if they are crazy expensive I could get away with less.

Re: Help with identifying connector. IC socket style.

PostPosted: Fri Aug 02, 2013 1:45 am
by Futureman
$1.03 each.

It looks like none are in stock, but they have 813 on order.

It may take 12 weeks before they have them in stock.

I personally can wait 12 weeks, if you are fine with that - I'll order them when back in stock.

Mike.

Re: Help with identifying connector. IC socket style.

PostPosted: Fri Aug 02, 2013 9:52 am
by Thirteen
Sure, I am OK to wait.

Re: Help with identifying connector. IC socket style.

PostPosted: Fri Aug 02, 2013 10:08 am
by rob
I'd be up for 20 of these too.

Re: Help with identifying connector. IC socket style.

PostPosted: Fri Aug 02, 2013 11:28 am
by Futureman
Cool. I'll set an alarm for 12 weeks.

Re: Help with identifying connector. IC socket style.

PostPosted: Fri Aug 02, 2013 7:32 pm
by cavedata
Try http://www.rockby.com.au/
stock# 14638
Not sure if gold plated ......

Evil site to search for parts on, but have lots of odd ball stuff tucked away in the back blocks....
eg Jones connector for an otari remote anyone? ( how I found em!)

Re: Help with identifying connector. IC socket style.

PostPosted: Fri Aug 02, 2013 9:26 pm
by Thirteen
Sounds right, I have to get some stuff from Rockby next week, I will grab a few and see if they are OK.

Re: Help with identifying connector. IC socket style.

PostPosted: Fri Sep 27, 2013 10:46 pm
by Futureman
I'm about to do a big Mouser order..

Anyone still up for some of these?

Re: Help with identifying connector. IC socket style.

PostPosted: Sat Sep 28, 2013 8:59 am
by Thirteen
I got some from Rockby, they seem to be OK so far....