JLM BA4

Are you building something? Share your resources with the locals - for more in depth D.I.Y. head to The Lab

Moderators: rick, Mark Bassett

JLM BA4

Postby Vic » Mon Jun 22, 2015 9:54 am

Just thought I would announce, that I have just nervously ordered what will be my first DIY attempt. The JLM BA4.

<gul[p> .....here I go. !!

Vic
Vic
Registered User
Registered User
 
Posts: 231
Joined: Sun Jul 11, 2010 11:50 am
Location: Birrego, Nsw (6 hours to Sydney, 4 hours to Melbourne)

Re: JLM BA4

Postby Junction » Mon Jun 22, 2015 5:43 pm

The only thing I can recommend .... for every component, double check its value, its location and orientation. Its so easy to rush and make a mistake and much much harder to work out where you went wrong later.

Good luck, you will enjoy the result
Michael
Michael Blackburn
michael@junctionaudio.com
Junction
Registered User
Registered User
 
Posts: 166
Joined: Wed Oct 20, 2010 4:28 pm
Location: Sydney

Re: JLM BA4

Postby Ben M » Tue Jun 23, 2015 5:03 pm

I'll go ahead and book you into DIY anonymous Vic :-j
User avatar
Ben M
Valued Contributor
Valued Contributor
 
Posts: 1902
Joined: Fri Jul 04, 2008 11:54 am
Location: Sydney and Kangaroo Valley, NSW

Re: JLM BA4

Postby Vic » Tue Jun 23, 2015 6:39 pm

No way, I'm just gonna try it once and that's it !!
Vic
Registered User
Registered User
 
Posts: 231
Joined: Sun Jul 11, 2010 11:50 am
Location: Birrego, Nsw (6 hours to Sydney, 4 hours to Melbourne)

Re: JLM BA4

Postby danander11 » Thu Jun 25, 2015 10:03 am

Vic wrote:No way, I'm just gonna try it once and that's it !!


lol... Sure you will. ;)
Danny Anderson
danander11
Registered User
Registered User
 
Posts: 225
Joined: Sat Aug 21, 2010 8:16 pm
Location: Sydney

Re: JLM BA4

Postby Vic » Thu Jun 25, 2015 6:36 pm

Hi Michael,

Thanks for your advice, I will make sure to triple check everything !!!!

Vic
Vic
Registered User
Registered User
 
Posts: 231
Joined: Sun Jul 11, 2010 11:50 am
Location: Birrego, Nsw (6 hours to Sydney, 4 hours to Melbourne)

Re: JLM BA4

Postby Vic » Tue Jul 28, 2015 10:35 pm

Boy, I've made four of these bits, now on to the other bits.

It's kinda really enjoyable and at the same time, really frustrating.

Yes indeed

:-)

Vic
You do not have the required permissions to view the files attached to this post.
Vic
Registered User
Registered User
 
Posts: 231
Joined: Sun Jul 11, 2010 11:50 am
Location: Birrego, Nsw (6 hours to Sydney, 4 hours to Melbourne)

Re: JLM BA4

Postby Ben M » Wed Jul 29, 2015 8:27 am

Vic wrote:It's kinda really enjoyable and at the same time, really frustrating.
Vic


Well done Vic!
Yep definitely can be frustrating.
But also so many great kits around..and support..it can feel very rewarding.
Nice work!
User avatar
Ben M
Valued Contributor
Valued Contributor
 
Posts: 1902
Joined: Fri Jul 04, 2008 11:54 am
Location: Sydney and Kangaroo Valley, NSW

Re: JLM BA4

Postby Vic » Mon Nov 23, 2015 10:19 pm

I have FINALLY finished my JLM BA4.

Well, when I say I, I had so much help, that I should barely say "I". But I have learned so much about the process. In reflection I think I should have started with a single preamp, but it's done now and patched into the studio and all sounding might fine.
You do not have the required permissions to view the files attached to this post.
Vic
Registered User
Registered User
 
Posts: 231
Joined: Sun Jul 11, 2010 11:50 am
Location: Birrego, Nsw (6 hours to Sydney, 4 hours to Melbourne)

Re: JLM BA4

Postby Wiz » Tue Nov 24, 2015 5:33 pm

Vic wrote:I have FINALLY finished my JLM BA4.

Well, when I say I, I had so much help, that I should barely say "I". But I have learned so much about the process. In reflection I think I should have started with a single preamp, but it's done now and patched into the studio and all sounding might fine.



great stuff

any chance we can get a wide shot.. I am about to start building new studio furniture...
Peter Knight

Cant ego loquemur Latine

http://www.ozlandmusic.com
Wiz
Valued Contributor
Valued Contributor
 
Posts: 1061
Joined: Thu Dec 03, 2009 10:17 pm

Re: JLM BA4

Postby Vic » Wed Nov 25, 2015 10:21 am

HI Peter,

Here's a wide shot :-)

Ta

Vic
You do not have the required permissions to view the files attached to this post.
Vic
Registered User
Registered User
 
Posts: 231
Joined: Sun Jul 11, 2010 11:50 am
Location: Birrego, Nsw (6 hours to Sydney, 4 hours to Melbourne)

Re: JLM BA4

Postby Wiz » Wed Nov 25, 2015 5:34 pm

Thanks Vic

Beautiful ;;)
Peter Knight

Cant ego loquemur Latine

http://www.ozlandmusic.com
Wiz
Valued Contributor
Valued Contributor
 
Posts: 1061
Joined: Thu Dec 03, 2009 10:17 pm

Re: JLM BA4

Postby Barney Loveland » Wed Nov 25, 2015 6:31 pm

Looking good, what is the floorboard timber? real timber? click together type?
Barney Loveland
Barney Loveland
Frequent Contributor
Frequent Contributor
 
Posts: 515
Joined: Mon May 09, 2005 5:28 pm
Location: Melbourne

Re: JLM BA4

Postby Vic » Fri Nov 27, 2015 12:27 am

Hi,

The floor is the click together type. It's a really beautiful one, we get a lot of comments about that floor when people walk into the control room.

Vic
Vic
Registered User
Registered User
 
Posts: 231
Joined: Sun Jul 11, 2010 11:50 am
Location: Birrego, Nsw (6 hours to Sydney, 4 hours to Melbourne)

Re: JLM BA4

Postby Wiz » Fri Nov 27, 2015 8:22 am

Vic wrote:Hi,

The floor is the click together type. It's a really beautiful one, we get a lot of comments about that floor when people walk into the control room.

Vic

amazing.. can you link me to the floor please..

looks killer, and I might use it in my house.

cheers

Wiz
Peter Knight

Cant ego loquemur Latine

http://www.ozlandmusic.com
Wiz
Valued Contributor
Valued Contributor
 
Posts: 1061
Joined: Thu Dec 03, 2009 10:17 pm

Re: JLM BA4

Postby Vic » Thu Dec 03, 2015 9:41 am

Hi,

I don't have the exact type written down.

I got it from this place, it was cheaper than you would think.

I'll have a look and see if I can find the invoice, and let you know.

But here is the link to the shop - http://www.lionkingflooring.com.au

Vic
Vic
Registered User
Registered User
 
Posts: 231
Joined: Sun Jul 11, 2010 11:50 am
Location: Birrego, Nsw (6 hours to Sydney, 4 hours to Melbourne)


Return to D.I.Y.

Who is online

Users browsing this forum: No registered users and 1 guest