Hi all,
I was just playing with my Urei 565T (Little Dipper) and the frequency select pots are a little crackly at each end of the throw - the good news is that the crackling is reducing with use, but I opened the lid (as you do) to have a stickybeak and they appear to be sealed pots.....
Could anyone advise if these pots can be lubed and what with?
thnkyavrymurch
- It is currently Fri Apr 19, 2024 2:00 pm • All times are UTC + 10 hours [ DST ]
Crackle in pots - Urei 565T - lube query
Moderators: rick, Mark Bassett
5 posts
• Page 1 of 1
Re: Crackle in pots - Urei 565T - lube query
With sealed pots I have always used a shoelace wrapped around the shaft a number of times then just pulled each end of the lace back and forth to rotate the pot it's full travel. Can take a while sometimes but usually works the crackles out. Jeez, Urei dippers, kepexes, did you raid a 1970's studio or something?
Andy Evans
http://www.mud.net.au
http://www.mud.net.au
-
Chinagraf - Valued Contributor
- Posts: 1608
- Joined: Wed Jun 22, 2005 1:09 am
- Location: Melbourne
Re: Crackle in pots - Urei 565T - lube query
Thanks Andy - I'll give the shoelace trick a spin
haha - I'm a '70s sort of guy - the Allison/Valley gear come up locally so I grabbed it (being a big fan of FZ), and the Urei because I needed to de-ess something and it's a bit more versatile than a de-esser - turns out to be a really nice sounding unit so I'll be after another one.... OCD for pairs of things....
haha - I'm a '70s sort of guy - the Allison/Valley gear come up locally so I grabbed it (being a big fan of FZ), and the Urei because I needed to de-ess something and it's a bit more versatile than a de-esser - turns out to be a really nice sounding unit so I'll be after another one.... OCD for pairs of things....
Ian Dare
- Drumstruck
- Valued Contributor
- Posts: 1589
- Joined: Fri Sep 17, 2010 12:37 pm
- Location: NSW South Coast
Re: Crackle in pots - Urei 565T - lube query
Hey Ian - a few years ago Rob restored 2x565's for me that had the crackle, at times this was taking out expensive tweeters on 2108 Quested monitors.
Plus I really wanted them as a matched stereo pair for mastering/stereo duties.
From memory he took the pots off and bathed them in some solution.
you may be able to de-solder the pots and send them down to Adelaide for a Jacuzzi ?
Plus I really wanted them as a matched stereo pair for mastering/stereo duties.
From memory he took the pots off and bathed them in some solution.
you may be able to de-solder the pots and send them down to Adelaide for a Jacuzzi ?
C h r i z t o w n o
- The Tasmanian
- Valued Contributor
- Posts: 1901
- Joined: Thu Nov 27, 2008 8:04 am
- Location: Deep in the woods....
Re: Crackle in pots - Urei 565T - lube query
Thanks Chris and Andy, many could take a leaf from your books - much appreciated
Ian Dare
- Drumstruck
- Valued Contributor
- Posts: 1589
- Joined: Fri Sep 17, 2010 12:37 pm
- Location: NSW South Coast
5 posts
• Page 1 of 1
Return to You've gotta start somewhere.
Who is online
Users browsing this forum: No registered users and 4 guests