i have seen a few kits over the years with the standard breather holes enlarged , badges removed - thinking of the shell holes here not the bass drum skin but i guess its part of the topic as well
i have had people tell me to point a mike at the hole in the shell for better tom sounds
comments ..?
- It is currently Mon Apr 29, 2024 8:15 am • All times are UTC + 10 hours [ DST ]
drum breather holes
Moderators: ChrisW, rick, Mark Bassett
12 posts
• Page 1 of 1
drum breather holes
Rick O'Neil
I think we went to different schools together
turtlerockmastering.com
we listen
I think we went to different schools together
turtlerockmastering.com
we listen
-
rick - Moderator
- Posts: 3486
- Joined: Fri May 06, 2005 8:02 pm
- Location: Sydney
Re: drum breather holes
I'd be cautions about wind noise - you can feel the air rush out of the vent when you strike the drumskin.....
Ian Dare
- Drumstruck
- Valued Contributor
- Posts: 1589
- Joined: Fri Sep 17, 2010 12:37 pm
- Location: NSW South Coast
Re: drum breather holes
It can be very interesting micing the shell of a snare drum.....side on.
I havent seen a kitvwith modified holes in the shell.....interesting. I always assumed it was to do with resonant frequency, a bit like blowing over the top of an empty coke bottle ala jug band
Wiz
I havent seen a kitvwith modified holes in the shell.....interesting. I always assumed it was to do with resonant frequency, a bit like blowing over the top of an empty coke bottle ala jug band
Wiz
Peter Knight
Cant ego loquemur Latine
http://www.peterknightmusician.com
Cant ego loquemur Latine
http://www.peterknightmusician.com
- Wiz
- Valued Contributor
- Posts: 1147
- Joined: Thu Dec 03, 2009 10:17 pm
Re: drum breather holes
Did a few sessions with Warne Livesey (he of Midnight Oil fame) and he swore by micing the vent on the snare.
He got a great snare sound too.
I haven't seen any kits with enlarged vents myself, except my Oaklawn Camco. It has a large hole in each tom shell.
It's not good for the acoustic drum sound IMO.
He got a great snare sound too.
I haven't seen any kits with enlarged vents myself, except my Oaklawn Camco. It has a large hole in each tom shell.
It's not good for the acoustic drum sound IMO.
Whitten
- ChrisW
- Valued Contributor
- Posts: 1285
- Joined: Thu Jan 29, 2009 12:01 pm
- Location: Hunter
Re: drum breather holes
do a google image search on "Vented Snare" and there are a bunch of them out there..
there is a basic explanation here: http://www.drumjunction.com/snare_drum.html
"The vented snare came about in the 1970's when Ludwig was trying to figure out a way to make a louder marching snare drum. Through experiments they found that creating a way to let the air out of the shell faster will result in the bottom head being louder (which of course is where the snares are located)."
I haven't tried one myself - already got about 15 different snares to choose from. Although the best sounding snare I have has a 40 strand snare wire on it which just sounds magic and gives you much more of a "snare" sound from it which I presume is what the vents are attempting to do also. It would be interesting to stick a mic in front of one of the larger vents like in some of those photos though! I haven't seen any toms with enlarged holes/vents though.
there is a basic explanation here: http://www.drumjunction.com/snare_drum.html
"The vented snare came about in the 1970's when Ludwig was trying to figure out a way to make a louder marching snare drum. Through experiments they found that creating a way to let the air out of the shell faster will result in the bottom head being louder (which of course is where the snares are located)."
I haven't tried one myself - already got about 15 different snares to choose from. Although the best sounding snare I have has a 40 strand snare wire on it which just sounds magic and gives you much more of a "snare" sound from it which I presume is what the vents are attempting to do also. It would be interesting to stick a mic in front of one of the larger vents like in some of those photos though! I haven't seen any toms with enlarged holes/vents though.
-
OzDrum - Registered User
- Posts: 171
- Joined: Mon May 09, 2005 8:07 pm
- Location: Hallam, Melbourne, VIC.
Re: drum breather holes
I discovered the "snare vent" mic setup completely by accident; my own wayward drumming knocked the 57, mounted on a crappy old stand, and pointed it directly at the vent. i don't think i've moved it since, it sounded that good!
It just seems to sound exactly how the snare sounds - kind of gives a "whole picture" of the snare. However hat bleed can get worse in this position
It just seems to sound exactly how the snare sounds - kind of gives a "whole picture" of the snare. However hat bleed can get worse in this position
Mitch Catterall
Down The Rabbit Hole
Down The Rabbit Hole
- rightintheface
- Registered User
- Posts: 168
- Joined: Sun Mar 27, 2011 11:02 am
- Location: Melbourne
Re: drum breather holes
A drummer I've recorded a few times has a snare with a vent about 1 1/2" across. A 57 pointed straight into it, about 1" out sounds great, a nice balance of stick/snare/body.
Kurt Neist
Chief cook and bottle washer - Metalworx
Chief cook and bottle washer - Metalworx
-
Kurt - Valued Contributor
- Posts: 1235
- Joined: Sat May 07, 2005 1:02 am
- Location: Canberra
Re: drum breather holes
8)
I found it by accident as well....
I take the 57 off the mic clip and hold it in my left hand, and rotate it through an arc, to fine the best rejection point for the hi hat, and then start moving the mic around the drum, to find the sound all the time tapping on the hi hat with a drum stick with my right hand.
I wasnt watching what I was doing, and all of a sudden had a great snare sound....looked down and the 57 was to the left side of the snare, vertically, at the same height as the actual centre of the snare. I was stunned. Whoda thunkit 8).
Viva le accidents...8)
cheers
Wiz
I found it by accident as well....
I take the 57 off the mic clip and hold it in my left hand, and rotate it through an arc, to fine the best rejection point for the hi hat, and then start moving the mic around the drum, to find the sound all the time tapping on the hi hat with a drum stick with my right hand.
I wasnt watching what I was doing, and all of a sudden had a great snare sound....looked down and the 57 was to the left side of the snare, vertically, at the same height as the actual centre of the snare. I was stunned. Whoda thunkit 8).
Viva le accidents...8)
cheers
Wiz
Peter Knight
Cant ego loquemur Latine
http://www.peterknightmusician.com
Cant ego loquemur Latine
http://www.peterknightmusician.com
- Wiz
- Valued Contributor
- Posts: 1147
- Joined: Thu Dec 03, 2009 10:17 pm
Re: drum breather holes
Given the right drummer that snare can sound like a jet of steam coming out of the vent. I occasionally mic it, and when I do I use an Octava MC012. I can see (or hear) how a 57 would be good for that too. I combine it with the top snare mic, never tried it on it's own.
I've never thought to try it on toms. I will have to now though.
I've never thought to try it on toms. I will have to now though.
- GlennS
- Registered User
- Posts: 178
- Joined: Tue Apr 20, 2010 5:37 pm
- Location: Sydney, Australia
Re: drum breather holes
Was micing up my brass snare and looking for "that sound" yesterday - trying a D11 and ended up with it just outside and 1" above the rim and pointed down at the vent at about 15 degrees off vertical - the rim click sound was the one
Ian Dare
- Drumstruck
- Valued Contributor
- Posts: 1589
- Joined: Fri Sep 17, 2010 12:37 pm
- Location: NSW South Coast
Re: drum breather holes
i have just been told the breather holes are the last secret drum trick
so dont tell anybody
so dont tell anybody
Rick O'Neil
I think we went to different schools together
turtlerockmastering.com
we listen
I think we went to different schools together
turtlerockmastering.com
we listen
-
rick - Moderator
- Posts: 3486
- Joined: Fri May 06, 2005 8:02 pm
- Location: Sydney
Re: drum breather holes
30 years ago I screwed a car tyre valve into a snare vent hole and pumped up the snare to make the skins slightly convex. This made the snare wires wrap smoothly across the whole skin surface, no more rattles and very snappy.
No good for micing up in this situation!
No good for micing up in this situation!
-
rob - TRM Endorsed
- Posts: 1011
- Joined: Tue May 10, 2005 9:16 pm
- Location: Adelaide
12 posts
• Page 1 of 1
Who is online
Users browsing this forum: No registered users and 6 guests