- It is currently Thu Apr 18, 2024 3:31 pm • All times are UTC + 10 hours [ DST ]
Reverb - what do you do?
Moderators: rick, Mark Bassett, gigpiglet
6 posts
• Page 1 of 1
Re: Reverb - what do you do?
This is an area that I haven't really been happy with. I've kept verb to an absolute minimum for just that reason... I'd love to hear responses too!
Lucas Martin
- Lucas
- Registered User
- Posts: 203
- Joined: Fri Jul 22, 2011 3:31 pm
Re: Reverb - what do you do?
well alright then....
i use 5 FX for pretty much every gig i do
1 - Snare verb
2 - toms/ ambient verb
3 - vox verb (long and short, more on this later)
4 - vox delay
5 - pitch/ anything else
my preference as to what units i choose changes depending on when in my history you are talking about/ the band/ my mood/ whats avail. but in general
1 - Yamaha Rev 500 or TC M1. its always a short plate of some description. warm plate, snare plate, etc etc. very small pre delay, and between 1.6 and 2 sec depending on the song. i do like the M1 in this place, as i can actually use 2 FX, short plate/ small room or something like that and blend with that knob on the front depending on the song.
2 - TC M1 or lexicon pretty much anything. its always a hall/ large room type thing. 2.4sec or so. and i usually EQ the return very hard, taking out a lot of top, and all the 3k area. its a dark, big verb.
3 - i actually like 2 verbs for vocals, and hence love the TC m1, cause i can blend between 2 engines with that knob. if i dont have an M1, i might want 2 lexicon anythings here (though they are very bright) i really try and avoid yamaha verb for vocals. whatever i have, i use a short plate, 1.4 or so, no pre delay, eq the return to take out the "bite" but its still sparkly and shiny. other verb is a longer room, say 2.2sec small predelay. i eq the return of this to take off the bright. then blend between the two sounds for busy songs or empty songs. i dont like the change reverb settings during a show, i think changing the lead vocal sound is disturbing - so rather blend in some more long, or some more short, rather than "change" to a long sound.
the BVs (if there are any) get the long rev sound (to sound similar to the lead) but not the short (which is close/ intimate/ up front/ everything a lead vocal should be)
4 - tap in the delay for the song, i ride it in and out on the lead vocal A LOT. catch a lot of long phrases (not as an echo, but as a help hold the note) its not something i want everyone to hear - just makes people think the singer is awesome. again - gotta know the band
5 - dont always need it, but sometimes for BVs (used to do it a lot with MGF) some pitch to fatten/ widen them. very rarely use it on the lead, but might need to if im struggling for level.
thats about it for me - those 5 do everything i need to everytime. if there are strings or piano or something else in the mix, one of the above will work for it. eg: the long vocal verb will work for piano, the short snare one for acoustic (if its needed) etc
i use 5 FX for pretty much every gig i do
1 - Snare verb
2 - toms/ ambient verb
3 - vox verb (long and short, more on this later)
4 - vox delay
5 - pitch/ anything else
my preference as to what units i choose changes depending on when in my history you are talking about/ the band/ my mood/ whats avail. but in general
1 - Yamaha Rev 500 or TC M1. its always a short plate of some description. warm plate, snare plate, etc etc. very small pre delay, and between 1.6 and 2 sec depending on the song. i do like the M1 in this place, as i can actually use 2 FX, short plate/ small room or something like that and blend with that knob on the front depending on the song.
2 - TC M1 or lexicon pretty much anything. its always a hall/ large room type thing. 2.4sec or so. and i usually EQ the return very hard, taking out a lot of top, and all the 3k area. its a dark, big verb.
3 - i actually like 2 verbs for vocals, and hence love the TC m1, cause i can blend between 2 engines with that knob. if i dont have an M1, i might want 2 lexicon anythings here (though they are very bright) i really try and avoid yamaha verb for vocals. whatever i have, i use a short plate, 1.4 or so, no pre delay, eq the return to take out the "bite" but its still sparkly and shiny. other verb is a longer room, say 2.2sec small predelay. i eq the return of this to take off the bright. then blend between the two sounds for busy songs or empty songs. i dont like the change reverb settings during a show, i think changing the lead vocal sound is disturbing - so rather blend in some more long, or some more short, rather than "change" to a long sound.
the BVs (if there are any) get the long rev sound (to sound similar to the lead) but not the short (which is close/ intimate/ up front/ everything a lead vocal should be)
4 - tap in the delay for the song, i ride it in and out on the lead vocal A LOT. catch a lot of long phrases (not as an echo, but as a help hold the note) its not something i want everyone to hear - just makes people think the singer is awesome. again - gotta know the band
5 - dont always need it, but sometimes for BVs (used to do it a lot with MGF) some pitch to fatten/ widen them. very rarely use it on the lead, but might need to if im struggling for level.
thats about it for me - those 5 do everything i need to everytime. if there are strings or piano or something else in the mix, one of the above will work for it. eg: the long vocal verb will work for piano, the short snare one for acoustic (if its needed) etc
Gareth Stuckey
gigpiglet productions:presents:recordings
gigpiglet productions:presents:recordings
- gigpiglet
- Valued Contributor
- Posts: 1153
- Joined: Tue Jun 01, 2010 4:10 pm
- Location: sydney australia
Re: Reverb - what do you do?
Thank you for being so thorough! I'm reassured that I can see a few concepts that I've also pursued, but even more so have been given fuel for new ideas and applications.
Lucas Martin
- Lucas
- Registered User
- Posts: 203
- Joined: Fri Jul 22, 2011 3:31 pm
Re: Reverb - what do you do?
Pro Harmonic Passive Link -> Electro Harmonix Holy Grail -> DI = heaps of fun.
Justin Hermes
- justin
- Registered User
- Posts: 52
- Joined: Thu Jun 03, 2010 6:58 pm
- Location: Adelaide
Re: Reverb - what do you do?
justin wrote:Pro Harmonic Passive Link -> Electro Harmonix Holy Grail -> DI = heaps of fun.
that reminded me of something i used to do with MGF.
had a little pedal board, with a tube distortion and wah pedal on an aux.
send whatever you want there (often vocals in the weirder songs) and have fun!
Gareth Stuckey
gigpiglet productions:presents:recordings
gigpiglet productions:presents:recordings
- gigpiglet
- Valued Contributor
- Posts: 1153
- Joined: Tue Jun 01, 2010 4:10 pm
- Location: sydney australia
6 posts
• Page 1 of 1
Who is online
Users browsing this forum: No registered users and 1 guest