Cleaning sliders - what's your method?

Moderators: Thirteen, rick, Mark Bassett

Cleaning sliders - what's your method?

Postby tweakeasy » Mon Apr 18, 2011 1:44 pm

Got my second 106 en route and it's been sitting unused for 3 years so want to give it a full going-over.

What's your method of cleaning sliders and pots? Is there some kind of spray that's safe to use?

Same question applies for cleaning contacts - apparently the patch data buttons need a bit of a wiggle/ extra press to activate.

Thanks guys n' gal! (Rachel being the 'gal' in that) :)
Michael Callanan

[insert witty slogan here]
User avatar
tweakeasy
Registered User
Registered User
 
Posts: 228
Joined: Thu May 21, 2009 2:54 pm
Location: Sunshine Coast

Re: Cleaning sliders - what's your method?

Postby a.d.a.m. baby » Tue Apr 19, 2011 12:14 am

This is always tricky, because some techniques work with certain hardware better than others. Sliders generally are easier than buttons. Many buttons/switches require some disassembly before spraying them with something like Deoxit etc, which can be a major PITA.

Also, just a thought, with something that has been idle that amount of time - I would be getting the PSU checked before powering it up, in case the electro caps are stuffed . . .
User avatar
a.d.a.m. baby
Registered User
Registered User
 
Posts: 219
Joined: Tue Sep 15, 2009 11:49 pm
Location: Gold Coast

Re: Cleaning sliders - what's your method?

Postby tweakeasy » Tue Apr 19, 2011 12:45 am

Yeah, a synth tech I just spoke to told me that Deoxit Faderlube is good for sliders and pots and Deoxit G5 for jacks and switches. He's putting me in touch with a bloke in Brisbane who sells it for $12 a can. Seems reasonable as I don't suppose you'd need much. For cleaning the outside I figure I will just stick to what I've always used - trusty ol' methylated spirits. With OJ, on ice and a little cocktail umbrella.

Would heed your advice and get PSU checked but as the seller switched it on to confirm for me that it was dead VC's that risk has already been taken.

Going to Jaycar to replace the tactile switches and see if that sorts that issue.

Thanks for the reply mate! :)
Michael Callanan

[insert witty slogan here]
User avatar
tweakeasy
Registered User
Registered User
 
Posts: 228
Joined: Thu May 21, 2009 2:54 pm
Location: Sunshine Coast

Re: Cleaning sliders - what's your method?

Postby Kurt » Tue Apr 19, 2011 2:12 am

If the deoxit deal comes through are you able to share the supplier? That seems very cheap and I've read good things about the stuff.
Kurt Neist
Chief cook and bottle washer - Metalworx
User avatar
Kurt
Valued Contributor
Valued Contributor
 
Posts: 1235
Joined: Sat May 07, 2005 1:02 am
Location: Canberra

Re: Cleaning sliders - what's your method?

Postby tweakeasy » Tue Apr 19, 2011 3:28 am

Kurt wrote:If the deoxit deal comes through are you able to share the supplier? That seems very cheap and I've read good things about the stuff.


I don't see why not, if I'm not able to deal direct and it has to be through my tech mate then I'll hit you up for how much you want, buy extra and you can just reimburse me plus cost of post to the ol' 'Berra. Won't be in the next couple of days but will be in the next week or two. Sound good?
Michael Callanan

[insert witty slogan here]
User avatar
tweakeasy
Registered User
Registered User
 
Posts: 228
Joined: Thu May 21, 2009 2:54 pm
Location: Sunshine Coast

Re: Cleaning sliders - what's your method?

Postby Thirteen » Tue Apr 19, 2011 8:45 am

That's about half the price that the Australian importer at Alexanderia in Sydney sells it for across the counter. One caveat, Faderlube is designed for conductive plastic pots. It does seem to work OK on carbon pots though. At that price I wouldn't mind buying some D5.....
Steve Jones
User avatar
Thirteen
TRM Endorsed
TRM Endorsed
 
Posts: 1279
Joined: Fri Dec 01, 2006 5:08 pm
Location: Sydney

Re: Cleaning sliders - what's your method?

Postby tweakeasy » Tue Apr 19, 2011 4:49 pm

Thirteen wrote:That's about half the price that the Australian importer at Alexanderia in Sydney sells it for across the counter. One caveat, Faderlube is designed for conductive plastic pots. It does seem to work OK on carbon pots though. At that price I wouldn't mind buying some D5.....


If the deal come through I'd be happy to get some to you as well Steve. Keep you posted.
Michael Callanan

[insert witty slogan here]
User avatar
tweakeasy
Registered User
Registered User
 
Posts: 228
Joined: Thu May 21, 2009 2:54 pm
Location: Sunshine Coast

Re: Cleaning sliders - what's your method?

Postby wez » Wed Jun 22, 2011 7:46 pm

Just thought i'd revive this thread as i'm going through shiteloads of deoxit at the moment and a cheap supply would be awesome. did we ever get the details of that supplier?
wez prictor
composure music
http://www.composuremusic.com.au/

Australian importer of Crumar Mojo keyboards & accessories. Vintage keyboard fetishist.
User avatar
wez
Valued Contributor
Valued Contributor
 
Posts: 1259
Joined: Fri May 06, 2005 10:38 pm
Location: Slightly to the left.

Re: Cleaning sliders - what's your method?

Postby Ben M » Wed Jun 22, 2011 7:54 pm

copy that
User avatar
Ben M
Valued Contributor
Valued Contributor
 
Posts: 1920
Joined: Fri Jul 04, 2008 11:54 am
Location: Sydney and Kangaroo Valley, NSW

Re: Cleaning sliders - what's your method?

Postby tweakeasy » Fri Jun 24, 2011 4:47 pm

Erk - forgot all about it amidst moving out of Brisbane to the Sunshine Coast and taking time out for one of my other passions - restoring my '62 Benz. :)

Currently in Fiji celebrating my 30th birthday, will get onto it 'pon my return.


Cheers
Michael Callanan

[insert witty slogan here]
User avatar
tweakeasy
Registered User
Registered User
 
Posts: 228
Joined: Thu May 21, 2009 2:54 pm
Location: Sunshine Coast

Re: Cleaning sliders - what's your method?

Postby Stephen C » Tue Sep 13, 2011 2:38 am

De-oxit is your friend.
Stephen C
Registered User
Registered User
 
Posts: 46
Joined: Sun May 08, 2005 12:24 am
Location: Sydney

Re: Cleaning sliders - what's your method?

Postby jpshea » Mon Feb 27, 2012 8:51 pm

A few pages of interest:

Fader Maintenance Procedures
http://www.manquen.net/audio/index.php?page=31

Fader Care and Replacement
http://www.rane.com/pots.html

http://www.turtlerockmastering.com/forums/viewtopic.php?f=1&p=50932#p50907

Vendor: Electrolube EML
http://www.electrolube.com/docs/lubricantmain.asp?id=65

element14 store (Electrolube EML):
http://au.element14.com/electrolube/eml200f/contact-cleaner-200ml-aerosol/dp/279481

Vendor store (US): Caig DeoxIT Fader
http://store.caig.com/s.nl/sc.2/category.293/.f

Vendor app note - Audio/Video 9-1-1
http://store.caig.com/s.nl/it.I/id.52/.f?sc=17&category=-117


Just looking into this atm for the somewhat crusty 30mm slide pots in my (soon-to-be immaculate) Juno 106.

Btw, if you need replacement 50K Linear, 30mm travel slide pots:
http://au.element14.com/alps/rs4511150k/potentiometer-slide-50k/dp/1191730

(I haven't ordered any of these, you'd need to check that the pins line up)

Regards,
JPS
jpshea
Registered User
Registered User
 
Posts: 4
Joined: Tue Nov 09, 2010 10:50 pm


Return to Vintage Synth Forum

Who is online

Users browsing this forum: No registered users and 5 guests


cron