What's the purpose of a Kick drum port? I saw a long plastic one on a kick drum recently and had never seen one until then. It was similar to this
http://www.kickport.com/kickport.html
Does anyone here use them?
- It is currently Sun Apr 28, 2024 11:16 pm • All times are UTC + 10 hours [ DST ]
Kick port?
Moderators: ChrisW, rick, Mark Bassett
11 posts
• Page 1 of 1
Kick port?
Lee McDonald
"A smart man learns from his mistakes but a wise man learns from other's"
"A smart man learns from his mistakes but a wise man learns from other's"
- Lee
- Regular Contributor
- Posts: 438
- Joined: Fri Feb 25, 2011 11:10 pm
- Location: Northern Beaches, Sydney
Re: Kick port?
I've noticed on a DW kick that I record occasionally it helps port or assist the air pressure from the drum and define the kick better. More for rock. I've also noticed that it reinforces the flappy hole that is usually cut out of the bass drum skin. Having it on seems to make that connection more solid and is helpful if you like to put a mic right at the hole. For recording I think they are helpful I don't think I would care in a live situation. Maybe gaffer tape around the hole would be just as good but porting this way seems to funnel the puff of air well and supports the skin. I'm only talking about a rock kick sound BTW.
Ben Moore
Harvest Recordings
Website: http://www.harvestrecordings.com.au
Facebook: http://www.faceback.com/harvestrecordings
Harvest Recordings
Website: http://www.harvestrecordings.com.au
Facebook: http://www.faceback.com/harvestrecordings
-
Ben M - Valued Contributor
- Posts: 1920
- Joined: Fri Jul 04, 2008 11:54 am
- Location: Sydney and Kangaroo Valley, NSW
Re: Kick port?
Has anyone used a sub Kick infront of a kick port? That sounds like an interesting combo.
Lee McDonald
"A smart man learns from his mistakes but a wise man learns from other's"
"A smart man learns from his mistakes but a wise man learns from other's"
- Lee
- Regular Contributor
- Posts: 438
- Joined: Fri Feb 25, 2011 11:10 pm
- Location: Northern Beaches, Sydney
Re: Kick port?
Lee wrote:Has anyone used a sub Kick infront of a kick port? That sounds like an interesting combo.
My sub kick is always on the non ported area to be able to get a punch mic either inside or around the hole. I guess it's the simplest method of getting both punch and sub... unless you bring the punch mic around to the beater side of the kick.
I imagine it would make it more of a woolier woof (what does that mean?) with more air punching into the sub kick. Always willing to experiment but I have my doubts on that one being complimentary.
Ben Moore
Harvest Recordings
Website: http://www.harvestrecordings.com.au
Facebook: http://www.faceback.com/harvestrecordings
Harvest Recordings
Website: http://www.harvestrecordings.com.au
Facebook: http://www.faceback.com/harvestrecordings
-
Ben M - Valued Contributor
- Posts: 1920
- Joined: Fri Jul 04, 2008 11:54 am
- Location: Sydney and Kangaroo Valley, NSW
Re: Kick port?
A few guys I deal with regularly use them and love them. I generally like to mic just inside the hole but with a kickport installed the mic has to be a couple of inches out.
Kurt Neist
Chief cook and bottle washer - Metalworx
Chief cook and bottle washer - Metalworx
-
Kurt - Valued Contributor
- Posts: 1235
- Joined: Sat May 07, 2005 1:02 am
- Location: Canberra
Re: Kick port?
I like them live, but not for recording.. without listening to all of the marketing crap.. It just makes the kick sound a tad 'firmer', not as nice as when the kick couples with the riser or stage, but still nice. I've not liked them when recording though...
Danny Anderson
- danander11
- Registered User
- Posts: 225
- Joined: Sat Aug 21, 2010 8:16 pm
- Location: Sydney
Re: Kick port?
There are plenty of positive comments around from drummers who've used them - generally the word is that they make a smaller drum sound bigger..... They would have to focus the note somewhat like a ported speaker - but like a port they need to be in the right spot and the correct tuned length.
The chrome ones look nice and (as said above) reinforce the hole in the front skin.
The chrome ones look nice and (as said above) reinforce the hole in the front skin.
Ian Dare
- Drumstruck
- Valued Contributor
- Posts: 1589
- Joined: Fri Sep 17, 2010 12:37 pm
- Location: NSW South Coast
Re: Kick port?
from the drummers seat the kick is easier to hear. a bit punchier. acoustically easier to hear.
from the mic side, yuk. you get a whistle/air noise and the kick sounds weird, almost phasey.
there is an acoustic guitar "Port" as well. this makes the acoustic (acoustically) louder and easier to hear. great for buskers. my girl does pre schools music classes. this really helps her in the classes as there is no amplification and the guitar is louder. again i take it out to record or play live amplified.
both products make the instrument louder acoustically. not better for recording.
i dont mic up the ports on a speaker cabinet and these are ports for acoustic instruments.
from the mic side, yuk. you get a whistle/air noise and the kick sounds weird, almost phasey.
there is an acoustic guitar "Port" as well. this makes the acoustic (acoustically) louder and easier to hear. great for buskers. my girl does pre schools music classes. this really helps her in the classes as there is no amplification and the guitar is louder. again i take it out to record or play live amplified.
both products make the instrument louder acoustically. not better for recording.
i dont mic up the ports on a speaker cabinet and these are ports for acoustic instruments.
Damien Young
damienyoungmusic@gmail.com
0412 354 254
damienyoungmusic@gmail.com
0412 354 254
-
Damien - Regular Contributor
- Posts: 313
- Joined: Sat May 07, 2005 5:02 am
- Location: Melbourne
Re: Kick port?
Yes, I'm really talking about recording and I've heard similar negative comments.
I would think using a subkick, or NS10 type arrangement would give you all the low end you need (for recording).
There are simple metal rings you can buy to reinforce holes cut into front heads.
I would think using a subkick, or NS10 type arrangement would give you all the low end you need (for recording).
There are simple metal rings you can buy to reinforce holes cut into front heads.
Whitten
- ChrisW
- Valued Contributor
- Posts: 1285
- Joined: Thu Jan 29, 2009 12:01 pm
- Location: Hunter
Re: Kick port?
Live use - yes, recording, probably no.
At gigs, they seem to increase the volume of the kick a great deal, though I doubt that would be good when recording.
At gigs, they seem to increase the volume of the kick a great deal, though I doubt that would be good when recording.
- onebaldbloke
- Registered User
- Posts: 58
- Joined: Sun Apr 10, 2011 1:12 pm
11 posts
• Page 1 of 1
Who is online
Users browsing this forum: No registered users and 2 guests