Hey all.
I need some help with identifying a connector.
Imagine a ribbon cable going into an IC.. That's it.
I realize it's an IDC style (insulation displacement connector) and the pitch is 2.54mm (0.1"), but I'm having no luck finding this style in mouser..
Any thoughts?
I need 16 way, preferably gold plated.
Regards,
Mike
- It is currently Fri Mar 29, 2024 12:17 am • All times are UTC + 10 hours [ DST ]
Help with identifying connector. IC socket style.
Moderators: rick, Mark Bassett
13 posts
• Page 1 of 1
Help with identifying connector. IC socket style.
Mike de Vrees
Purveyor of old stuff
Purveyor of old stuff
-
Futureman - Frequent Contributor
- Posts: 991
- Joined: Wed Mar 19, 2008 4:47 pm
- Location: Sydney
Re: Help with identifying connector. IC socket style.
Jaycar ( of all places ) used to sell these. But I can't see them in the current catalog. I have a couple here if you get stuck. They are in my AMS repair kit...
-
rob - TRM Endorsed
- Posts: 1011
- Joined: Tue May 10, 2005 9:16 pm
- Location: Adelaide
Re: Help with identifying connector. IC socket style.
I used to get them from Jaycar too, 16 pin DIP headers. I hope they still have them, I need a bunch to fix up my AMS delay so I can sell it!
Steve Jones
-
Thirteen - TRM Endorsed
- Posts: 1279
- Joined: Fri Dec 01, 2006 5:08 pm
- Location: Sydney
Re: Help with identifying connector. IC socket style.
http://au.mouser.com/ProductDetail/Kobi ... jKQiu6o%3d
Mouser has em, in gold.
I've used X-on.com.au to purchase mouser for a flat rate of $15 postage.
I've got 2 or 3 in my stash, but i need to replace a few in this Arp Quadra.
Steve, if you need a handful, I can order from X-On and we can split it..
Regards,
Mouser has em, in gold.
I've used X-on.com.au to purchase mouser for a flat rate of $15 postage.
I've got 2 or 3 in my stash, but i need to replace a few in this Arp Quadra.
Steve, if you need a handful, I can order from X-On and we can split it..
Regards,
Mike de Vrees
Purveyor of old stuff
Purveyor of old stuff
-
Futureman - Frequent Contributor
- Posts: 991
- Joined: Wed Mar 19, 2008 4:47 pm
- Location: Sydney
Re: Help with identifying connector. IC socket style.
Sure, did you see a price? I need 22 of them but if they are crazy expensive I could get away with less.
Steve Jones
-
Thirteen - TRM Endorsed
- Posts: 1279
- Joined: Fri Dec 01, 2006 5:08 pm
- Location: Sydney
Re: Help with identifying connector. IC socket style.
$1.03 each.
It looks like none are in stock, but they have 813 on order.
It may take 12 weeks before they have them in stock.
I personally can wait 12 weeks, if you are fine with that - I'll order them when back in stock.
Mike.
It looks like none are in stock, but they have 813 on order.
It may take 12 weeks before they have them in stock.
I personally can wait 12 weeks, if you are fine with that - I'll order them when back in stock.
Mike.
Mike de Vrees
Purveyor of old stuff
Purveyor of old stuff
-
Futureman - Frequent Contributor
- Posts: 991
- Joined: Wed Mar 19, 2008 4:47 pm
- Location: Sydney
Re: Help with identifying connector. IC socket style.
I'd be up for 20 of these too.
-
rob - TRM Endorsed
- Posts: 1011
- Joined: Tue May 10, 2005 9:16 pm
- Location: Adelaide
Re: Help with identifying connector. IC socket style.
Cool. I'll set an alarm for 12 weeks.
Mike de Vrees
Purveyor of old stuff
Purveyor of old stuff
-
Futureman - Frequent Contributor
- Posts: 991
- Joined: Wed Mar 19, 2008 4:47 pm
- Location: Sydney
Re: Help with identifying connector. IC socket style.
Try http://www.rockby.com.au/
stock# 14638
Not sure if gold plated ......
Evil site to search for parts on, but have lots of odd ball stuff tucked away in the back blocks....
eg Jones connector for an otari remote anyone? ( how I found em!)
stock# 14638
Not sure if gold plated ......
Evil site to search for parts on, but have lots of odd ball stuff tucked away in the back blocks....
eg Jones connector for an otari remote anyone? ( how I found em!)
Dave Carter
- cavedata
- Registered User
- Posts: 7
- Joined: Sun Apr 05, 2009 10:06 am
Re: Help with identifying connector. IC socket style.
Sounds right, I have to get some stuff from Rockby next week, I will grab a few and see if they are OK.
Steve Jones
-
Thirteen - TRM Endorsed
- Posts: 1279
- Joined: Fri Dec 01, 2006 5:08 pm
- Location: Sydney
Re: Help with identifying connector. IC socket style.
I'm about to do a big Mouser order..
Anyone still up for some of these?
Anyone still up for some of these?
Mike de Vrees
Purveyor of old stuff
Purveyor of old stuff
-
Futureman - Frequent Contributor
- Posts: 991
- Joined: Wed Mar 19, 2008 4:47 pm
- Location: Sydney
Re: Help with identifying connector. IC socket style.
I got some from Rockby, they seem to be OK so far....
Steve Jones
-
Thirteen - TRM Endorsed
- Posts: 1279
- Joined: Fri Dec 01, 2006 5:08 pm
- Location: Sydney
13 posts
• Page 1 of 1
Who is online
Users browsing this forum: No registered users and 0 guests