DIY Plate reverb ideas for experimenters

Are you building something? Share your resources with the locals - for more in depth D.I.Y. head to The Lab

Moderators: rick, Mark Bassett

DIY Plate reverb ideas for experimenters

Postby Alastair Reynolds » Wed Aug 21, 2013 2:46 pm

Interesting new transducer that could be used to drive a reverb plate Ekadek Style

http://ekadek.com/?cat=59

http://www.daytonaudio.com/index.php/hdn-8-weatherproof-sound-exciter-transducer.html
$17.50
or
http://www.daytonaudio.com/index.php/daex25-sound-exciter-pair.html$22.50

from WES Components

An Idea for the old school when you can't find an EMT 140

Steel plate suspended in frame, Amp driving transducer at one end of plate, Barcus Berry pickup on other end of plate.
I might make one over summer.
Any constructive input welcome
Alastair Reynolds
Broadcast Radio Engineer
Master of the Dark Arts (Broadcast)
User avatar
Alastair Reynolds
TRM Endorsed
TRM Endorsed
 
Posts: 475
Joined: Mon Dec 04, 2006 1:51 pm
Location: Sydney

Re: DIY Plate reverb ideas for experimenters

Postby Drumstruck » Wed Aug 21, 2013 2:58 pm

i've been planning to make one of these for some time - just don't have some time.....

plans:
https://dl.dropboxusercontent.com/u/991 ... uction.pdf

B-)
Ian Dare
Drumstruck
Valued Contributor
Valued Contributor
 
Posts: 1589
Joined: Fri Sep 17, 2010 12:37 pm
Location: NSW South Coast

Re: DIY Plate reverb ideas for experimenters

Postby Alastair Reynolds » Wed Aug 21, 2013 3:03 pm

Thanks Ian, looks good
Cheers
Alastair
User avatar
Alastair Reynolds
TRM Endorsed
TRM Endorsed
 
Posts: 475
Joined: Mon Dec 04, 2006 1:51 pm
Location: Sydney

Re: DIY Plate reverb ideas for experimenters

Postby Ben M » Wed Aug 21, 2013 4:12 pm

There's also the Vidsonix Ghost driver for around $20 which has a flat face with holes for attaching it to the plate. http://www.vidsonix.com/vidsonixnew/info_vxgh72.htm
I used one of these on the plate I built...using a large old bbq lid as the plate :) haha, Worked really well.
The sound exciters would have been my next choice. They look funky.
User avatar
Ben M
Valued Contributor
Valued Contributor
 
Posts: 1920
Joined: Fri Jul 04, 2008 11:54 am
Location: Sydney and Kangaroo Valley, NSW

Re: DIY Plate reverb ideas for experimenters

Postby Lee » Sat Aug 24, 2013 11:49 pm

Your post Alastair has had me researching home made plate reverbs for the last few days and I would also like to build one for our studio so If you would like a partner this summer I would like to make one with you.

What I have read sofar (thanks too Ian for the PDF) is that Steel is preferred over Aluminum, being able to tension the sheet is important for tuning and having a dampener helps to control the reverb time.
According to one source EMT used a 1-meter by 2-meter cold-rolled steel plate approximately 1/64-inch thick. http://www.prosoundweb.com/article/prin ... ate_reverb
The same source suggests testing the sheet with a key to assess its tone when selecting it, which makes sense to me. Here is their shopping list-

Plate Reverb Required Parts
1 x Steel Sheet (your choice)
Approx 30 feet x Tubular Steel or Angle Iron (for frame)
10 x Threaded Rubber Coated Mounting Hooks
10 x Nuts (to fit Hooks)
10 x Rubber Washers
10 x Fender Washers
1 x Driver (your choice)
1 or 2 x Pickup Transducers
1 or 2 x Preamps, DI boxes, Transformers for Pickups (if needed)

Optional Parts
1 x Case (your choice of style and material)
1 x Damping Mechanism with Absorptive Material (your choice)
Suspension Method (to isolate plate and frame from case)
Lee McDonald
"A smart man learns from his mistakes but a wise man learns from other's"
Lee
Regular Contributor
Regular Contributor
 
Posts: 438
Joined: Fri Feb 25, 2011 11:10 pm
Location: Northern Beaches, Sydney

Re: DIY Plate reverb ideas for experimenters

Postby Ben M » Sun Aug 25, 2013 11:11 am

Just thinking out loud... what about an old unused trampoline frame with the legs cut off for the frame??? :)
User avatar
Ben M
Valued Contributor
Valued Contributor
 
Posts: 1920
Joined: Fri Jul 04, 2008 11:54 am
Location: Sydney and Kangaroo Valley, NSW


Return to D.I.Y.

Who is online

Users browsing this forum: No registered users and 0 guests


cron