- It is currently Wed May 15, 2024 2:18 pm • All times are UTC + 10 hours [ DST ]
GSSL & GPultec Parts
Moderators: rick, Mark Bassett
15 posts
• Page 1 of 1
GSSL & GPultec Parts
I've had the pcbs sitting here for a while and want to finally get started...
Does anyone have parts they want to get rid of?
Cheers
Does anyone have parts they want to get rid of?
Cheers
- NathS101
Re: GSSL & GPultec Parts
Nathan, altronics or mouser should have the parts you need. Rob is doing my front panel layout for my GSSL as we speak.
Andy Griffiths- onthebeatstudios & Andy's custom cables
http://www.onthebeatstudios.com
http://www.andyscustomcables.com
http://www.onthebeatstudios.com
http://www.andyscustomcables.com
- andygriffiths
- Regular Contributor
- Posts: 300
- Joined: Fri Apr 13, 2012 11:30 am
- Location: Brisbane
Re: GSSL & GPultec Parts
I can give you a mouser bom for the pultec...I'm pretty sure i spec'd it right
U47 , 1176 Blue Stripe, Great River ME-1NV, BAE 1073, Distressor, Event Opals
Senheiser e906, MBox 3 Pro, Pro Tools, Cubase 6, Omnisphere
Senheiser e906, MBox 3 Pro, Pro Tools, Cubase 6, Omnisphere
- drivebystudios
- Registered User
- Posts: 30
- Joined: Sun Mar 18, 2012 4:46 pm
- Location: Perth WA
Re: GSSL & GPultec Parts
I've just finished a BOM for the gPultec. I've seperated it out to make life easy for anyone that wants to substitute Caps, Pots etc.
I'm pretty sure its correct, but if anyone spots anything thats incorrect, messeage me and I'll update it!
Cheers
GPULTEC - Bournes Pots
http://www.mouser.com/ProjectManager/Pr ... 2cc0c52744
GPULTEC - Other bits
http://www.mouser.com/ProjectManager/Pr ... 69335a7714
GPULTEC - Panasonic Capacitators
http://www.mouser.com/ProjectManager/Pr ... 334ceea274
GPULTEC - Pots & Switches
http://www.mouser.com/ProjectManager/Pr ... 4dea3c693a
GPULTEC - Power PCB
http://www.mouser.com/ProjectManager/Pr ... b8e7d2b0da
GPULTEC - Resistors
http://www.mouser.com/ProjectManager/Pr ... bfd9240598
I'm pretty sure its correct, but if anyone spots anything thats incorrect, messeage me and I'll update it!
Cheers
GPULTEC - Bournes Pots
http://www.mouser.com/ProjectManager/Pr ... 2cc0c52744
GPULTEC - Other bits
http://www.mouser.com/ProjectManager/Pr ... 69335a7714
GPULTEC - Panasonic Capacitators
http://www.mouser.com/ProjectManager/Pr ... 334ceea274
GPULTEC - Pots & Switches
http://www.mouser.com/ProjectManager/Pr ... 4dea3c693a
GPULTEC - Power PCB
http://www.mouser.com/ProjectManager/Pr ... b8e7d2b0da
GPULTEC - Resistors
http://www.mouser.com/ProjectManager/Pr ... bfd9240598
U47 , 1176 Blue Stripe, Great River ME-1NV, BAE 1073, Distressor, Event Opals
Senheiser e906, MBox 3 Pro, Pro Tools, Cubase 6, Omnisphere
Senheiser e906, MBox 3 Pro, Pro Tools, Cubase 6, Omnisphere
- drivebystudios
- Registered User
- Posts: 30
- Joined: Sun Mar 18, 2012 4:46 pm
- Location: Perth WA
Re: GSSL & GPultec Parts
Cheers guys! Will suss it out.
Where is the best place to source inductors & transformers? don-audio?
Where is the best place to source inductors & transformers? don-audio?
- NathS101
Re: GSSL & GPultec Parts
You can get the gPultec inductors from Sowter or Don-Audio.
I know a guy that will wind quality inductors pretty cheap and apparently better quality than Don.
He does a minimum order of 4 inductors.
Transformers can be gotten from the Australian dealer for Lundahl for $70 (free shipping if qty 4+)
I'm actually sourcing parts for this now, so if anyone's keen on a groupbuy we could get the prices lower!!!
I know a guy that will wind quality inductors pretty cheap and apparently better quality than Don.
He does a minimum order of 4 inductors.
Transformers can be gotten from the Australian dealer for Lundahl for $70 (free shipping if qty 4+)
I'm actually sourcing parts for this now, so if anyone's keen on a groupbuy we could get the prices lower!!!
U47 , 1176 Blue Stripe, Great River ME-1NV, BAE 1073, Distressor, Event Opals
Senheiser e906, MBox 3 Pro, Pro Tools, Cubase 6, Omnisphere
Senheiser e906, MBox 3 Pro, Pro Tools, Cubase 6, Omnisphere
- drivebystudios
- Registered User
- Posts: 30
- Joined: Sun Mar 18, 2012 4:46 pm
- Location: Perth WA
Re: GSSL & GPultec Parts
oh and I'm looking at building a GSSL too, so maybe a group buy on the cases would be good, save loads on shipping i'm guessing.
I'm digging the white SSL copy from here:
http://www.frontpanels.de/gyraf-diy-pro ... raf-g-ssl/
I'm digging the white SSL copy from here:
http://www.frontpanels.de/gyraf-diy-pro ... raf-g-ssl/
U47 , 1176 Blue Stripe, Great River ME-1NV, BAE 1073, Distressor, Event Opals
Senheiser e906, MBox 3 Pro, Pro Tools, Cubase 6, Omnisphere
Senheiser e906, MBox 3 Pro, Pro Tools, Cubase 6, Omnisphere
- drivebystudios
- Registered User
- Posts: 30
- Joined: Sun Mar 18, 2012 4:46 pm
- Location: Perth WA
Re: GSSL & GPultec Parts
I've contacted these guys in Australia, they do wind inductors, so they may be able to knock us up some for the gPultec
amplifiedelectronics.com.au
amplifiedelectronics.com.au
U47 , 1176 Blue Stripe, Great River ME-1NV, BAE 1073, Distressor, Event Opals
Senheiser e906, MBox 3 Pro, Pro Tools, Cubase 6, Omnisphere
Senheiser e906, MBox 3 Pro, Pro Tools, Cubase 6, Omnisphere
- drivebystudios
- Registered User
- Posts: 30
- Joined: Sun Mar 18, 2012 4:46 pm
- Location: Perth WA
Re: GSSL & GPultec Parts
hmm interesting... thanks for sussing that out.
when are you looking at buying these parts?
when are you looking at buying these parts?
- NathS101
Re: GSSL & GPultec Parts
umm no rush, still sussing things out.
U47 , 1176 Blue Stripe, Great River ME-1NV, BAE 1073, Distressor, Event Opals
Senheiser e906, MBox 3 Pro, Pro Tools, Cubase 6, Omnisphere
Senheiser e906, MBox 3 Pro, Pro Tools, Cubase 6, Omnisphere
- drivebystudios
- Registered User
- Posts: 30
- Joined: Sun Mar 18, 2012 4:46 pm
- Location: Perth WA
Re: GSSL & GPultec Parts
hey guys I'm keen to jump into building the two GPultecs.
who else is in? driveby?
who else is in? driveby?
- NathS101
Re: GSSL & GPultec Parts
Hey guys has anyone had experience building the Gpultec with more of a custom approach?
I'm thinking carbon comp resistors and ceramic caps might get me a nicer sound than the metal film resistors and panasonic caps...
Any feedback?
Cheers
I'm thinking carbon comp resistors and ceramic caps might get me a nicer sound than the metal film resistors and panasonic caps...
Any feedback?
Cheers
- NathS101
Re: GSSL & GPultec Parts
I haven't done the gpultec but I have just finished a drip la2a with carbon comp resistors & it sounds amazing.
Andy Griffiths- onthebeatstudios & Andy's custom cables
http://www.onthebeatstudios.com
http://www.andyscustomcables.com
http://www.onthebeatstudios.com
http://www.andyscustomcables.com
- andygriffiths
- Regular Contributor
- Posts: 300
- Joined: Fri Apr 13, 2012 11:30 am
- Location: Brisbane
Re: GSSL & GPultec Parts
andygriffiths wrote:I haven't done the gpultec but I have just finished a drip la2a with carbon comp resistors & it sounds amazing.
I finished mine a year ago... love it too!
Also want to start the two V72 PCBs I have sitting here...
- NathS101
Re: GSSL & GPultec Parts
do the pultec (any version) and you will love it. I've built two types (valve and solid-state) and both are excellent. Depending what you build I have various parts, transformers, switches, pots etc.
Myles Mumford
Producer/Composer/Engineer/Sound Artist
Making records in sunny Melbourne
www.mylesmumford.com
Producer/Composer/Engineer/Sound Artist
Making records in sunny Melbourne
www.mylesmumford.com
-
mylesgm - Valued Contributor
- Posts: 1964
- Joined: Mon Feb 09, 2009 6:48 pm
15 posts
• Page 1 of 1
Who is online
Users browsing this forum: No registered users and 0 guests