contact cleaner - recommendations?

A place to ask the basic questions, a place for students, newbies, and everyone else.

Moderators: rick, Mark Bassett

contact cleaner - recommendations?

Postby dave01.cooper » Wed Jan 15, 2014 11:02 am

what does everyone use?
have used so many different brands and almost out my electrolube stuff so wondering if anyone has any tips on what to get.

fwiw, will be used on sticky pots, faders, switches etc etc.

cheers all
Dave Cooper

E - dave @ soundmachinestudios . com . au
W - soundmachinestudios.com.au
dave01.cooper
Regular Contributor
Regular Contributor
 
Posts: 448
Joined: Wed Oct 06, 2010 3:49 pm
Location: Melbourne

Re: contact cleaner - recommendations?

Postby gigpiglet » Wed Jan 15, 2014 11:44 am

rick has a favourite… i can't remember what its called but he will likely chime in
as for use - i understand you DONT use contact cleaner on faders.
Gareth Stuckey
gigpiglet productions:presents:recordings
gigpiglet
Valued Contributor
Valued Contributor
 
Posts: 1153
Joined: Tue Jun 01, 2010 4:10 pm
Location: sydney australia

Re: contact cleaner - recommendations?

Postby Ben M » Wed Jan 15, 2014 12:00 pm

Hi Dave
I use Deoxit Faderlube F5 here.
Cleans, lubricates, improves contact and protects surfaces...plastic to plastic and plastic to metal surfaces.

cheers
User avatar
Ben M
Valued Contributor
Valued Contributor
 
Posts: 1920
Joined: Fri Jul 04, 2008 11:54 am
Location: Sydney and Kangaroo Valley, NSW

Re: contact cleaner - recommendations?

Postby Thirteen » Wed Jan 15, 2014 6:34 pm

Ben M wrote:Hi Dave
I use Deoxit Faderlube F5 here.
Cleans, lubricates, improves contact and protects surfaces...plastic to plastic and plastic to metal surfaces.

cheers


You can get Deoxit cans from Caprina in Alexandria.
Steve Jones
User avatar
Thirteen
TRM Endorsed
TRM Endorsed
 
Posts: 1279
Joined: Fri Dec 01, 2006 5:08 pm
Location: Sydney

Re: contact cleaner - recommendations?

Postby dave01.cooper » Wed Jan 15, 2014 7:05 pm

thanks for the recommendations guys, will stock up accordingly!
Dave Cooper

E - dave @ soundmachinestudios . com . au
W - soundmachinestudios.com.au
dave01.cooper
Regular Contributor
Regular Contributor
 
Posts: 448
Joined: Wed Oct 06, 2010 3:49 pm
Location: Melbourne

Re: contact cleaner - recommendations?

Postby wez » Thu Jan 16, 2014 10:44 am

Deoxit DN5 (or D5, same thing) for connections and switches, Deoxit F5 (Faderlube) for pots and faders (ie anything that needs lube). Is good stuff.

I've recently had great success cleaning up a bunch of scratchy faders (alps carbon) with the following method... disassemble, Deoxit DN5 to clean, let sit for a bit, wipe off, coat of F5, good as new.

Serge at Audio Oz is your local guy for Caig... although he has recently moved to the end of the earth. http://www.audiooz.com.au/
Last edited by wez on Thu Jan 16, 2014 11:37 pm, edited 4 times in total.
wez prictor
composure music
http://www.composuremusic.com.au/

Australian importer of Crumar Mojo keyboards & accessories. Vintage keyboard fetishist.
User avatar
wez
Valued Contributor
Valued Contributor
 
Posts: 1259
Joined: Fri May 06, 2005 10:38 pm
Location: Slightly to the left.

Re: contact cleaner - recommendations?

Postby rob » Thu Jan 16, 2014 5:55 pm

make sure you clean all the D5 out. That stuff is not designed to be used as a contact cleaner and then not washed out.
User avatar
rob
TRM Endorsed
TRM Endorsed
 
Posts: 1011
Joined: Tue May 10, 2005 9:16 pm
Location: Adelaide

Re: contact cleaner - recommendations?

Postby a.d.a.m. baby » Thu Jan 16, 2014 7:55 pm

But D5 is OK to leave on patchbays, yeah?
User avatar
a.d.a.m. baby
Registered User
Registered User
 
Posts: 219
Joined: Tue Sep 15, 2009 11:49 pm
Location: Gold Coast

Re: contact cleaner - recommendations?

Postby rob » Thu Jan 16, 2014 8:14 pm

I suspect not .... I and some other techs have noticed that D5 cleaned contacts develop a greenish 'growth" over time
User avatar
rob
TRM Endorsed
TRM Endorsed
 
Posts: 1011
Joined: Tue May 10, 2005 9:16 pm
Location: Adelaide

Re: contact cleaner - recommendations?

Postby Hookemeister » Thu Jan 30, 2014 9:49 pm

I and some other techs have noticed that D5 cleaned contacts develop a greenish 'growth" over time

Rob's on the money with that observation.

Here's my advice for servicing good quality patchbays (Switchcraft, ADC, Neutric etc).

1. I never spray anything wet inside a patchbay, even if it's an evaporative spray.
Firstly the compressed air propellent will disturb any dust residing in the patchbay and that dust will then cling to the wet surfaces before the spray has time to evaporate.

If the spray contains any oil then that oil will stay there the and any dust in the future will bind to it. Over a period of time that oil/dust combination can bridge contacts and cause you grief.

Note: The normalling contacts on patchbays are designed with a self wiping action, as the contacts make or break, the wiping action cleans the contacts.

2. The only thing you really need to clean on a patchbay is the tip, ring and sleeve of the jack.

The way to do this is with a Burnishing Tool and only when there's a problem. This is tool looks exactly like patchbay plug except it's all metal.

7076_1_.jpg

You simply insert the burnishing tool and rotate it a couple of times and you're done.
Use it sparingly, as they are slightly abrasive

If patch bays are in a clean enviroment and are used regularly, the action of inserting a regular patch bay plug and removing it is all that is normally required to clean it.

Use a bit of preventitive maintenance, make sure patch plugs are kept clean, and once a month insert and remove a patch cord 2 or 3 times into each jack on the bay.

Lastly if you are going to vacuum the patch bay, if possible, vacuum from the rear of the bay.

Hope this helps.
You do not have the required permissions to view the files attached to this post.
Greg Hooke
Hookemeister
Regular Contributor
Regular Contributor
 
Posts: 361
Joined: Sat Jul 10, 2010 8:47 pm

Re: contact cleaner - recommendations?

Postby Lee » Thu Jan 30, 2014 11:30 pm

Thanks greg your posts are allways insightful:) I have been thinking about how to clean our patchbay the right way.
I guess vacuuming from underneath pulls the dust back down as to not go back on the contact is that the logic?
Lee McDonald
"A smart man learns from his mistakes but a wise man learns from other's"
Lee
Regular Contributor
Regular Contributor
 
Posts: 438
Joined: Fri Feb 25, 2011 11:10 pm
Location: Northern Beaches, Sydney


Return to You've gotta start somewhere.

Who is online

Users browsing this forum: No registered users and 3 guests


cron