Hey all,
Lately, I've been gradually building up my resumé of fixing vintage synths , drum machines, Pedals and outboard.
I'm now expanding this from my own gear & friends to include other people.
This goes from a mild tune up / calibration to a full restoration to something like replacing the key bushings in your vintage Moog.
I prefer working on vintage equipment (1971 - 1986) but let me know if you have anything modern that needs attention.
PM me if you have any questions.
(Sorry, but I'm not experienced in Valves / Guitars / Guitar Amps)
My Recent work consisted of,
Sequential Prophet 5 Rev2 - Full restoration - Many issues
Korg PolySix - Rebuilt new KLM 367 board
Korg Poly61 - Full restoration - Replaced all tact switches - repaired corroded board - Installed MIDI kit
Korg PolySix - Installed MIDI Kit
Roland D50 - Repair
Arp Quadra - Full restoration - Many Faults & Issues.
Moog MicroMoog - repair - Many Issues
Arp Omni - Full restoration
Oberheim DMX - Repaired - Installed MIDI kit
Sequential Pro1 - Installed MIDI Kit
Arp Odyssey - Repaired
Arp Odyssey #2 - Fixed dead S&H circuit - Replaced some faders.
Emu Emulator II - Repaired.
Emu Emulator I - Repaired.
Roland Juno60 - Installation of Midi kit.
Roland CR-5000 - Racking & powering of voice board + installation of Midi.
Eventide 910 - Repair
Lexicon Prime Time - Repair
Lexicon Prime Time #2 - Repair
MXR Pitch Transposer - Repair
EHX Guitar Synthesiser Rack - Repair
- It is currently Fri Apr 19, 2024 1:53 pm • All times are UTC + 10 hours [ DST ]
Vintage Synth Repair - Sydney
Moderators: Thirteen, rick, Mark Bassett
7 posts
• Page 1 of 1
Vintage Synth Repair - Sydney
Mike de Vrees
Purveyor of old stuff
Purveyor of old stuff
-
Futureman - Frequent Contributor
- Posts: 994
- Joined: Wed Mar 19, 2008 4:47 pm
- Location: Sydney
Re: Vintage Synth Repair - Sydney
Wow.
Ok,
So I'm now a bit booked out for the next um 3 years.. lol.
Just repaired an Akai S612 (Loud Hum + 2 dead voices) .. then on to the Oscar.
After Oscar it's on to a Minimoog , Prophet 5 Rev3.3 , Jupiter 4.. JX8p and a load more.
Ok,
So I'm now a bit booked out for the next um 3 years.. lol.
Just repaired an Akai S612 (Loud Hum + 2 dead voices) .. then on to the Oscar.
After Oscar it's on to a Minimoog , Prophet 5 Rev3.3 , Jupiter 4.. JX8p and a load more.
Mike de Vrees
Purveyor of old stuff
Purveyor of old stuff
-
Futureman - Frequent Contributor
- Posts: 994
- Joined: Wed Mar 19, 2008 4:47 pm
- Location: Sydney
Re: Vintage Synth Repair - Sydney
Better quit ur day job
Jamil Khuri
Amusement & Audio Engineer
"it's not awesome unless its 240bpm with distorted 909 kicks!"
Amusement & Audio Engineer
"it's not awesome unless its 240bpm with distorted 909 kicks!"
- jkhuri44
- Forum Veteran
- Posts: 2537
- Joined: Wed Sep 20, 2006 10:53 pm
- Location: Dundas
Re: Vintage Synth Repair - Sydney
ChrisW wrote:I didn't get in quick enough with my Eventide H910.
I'm happy to have a look at it.. It should be easier to fix yours with a working one next to it.
Mike de Vrees
Purveyor of old stuff
Purveyor of old stuff
-
Futureman - Frequent Contributor
- Posts: 994
- Joined: Wed Mar 19, 2008 4:47 pm
- Location: Sydney
Re: Vintage Synth Repair - Sydney
Is this offer still a possibility?
We have a few vintage synths that need reviving at some point soon. Top of the list is a Mini Korg 700s let me know if you may have time to do so. It would be greatly appreciated
We have a few vintage synths that need reviving at some point soon. Top of the list is a Mini Korg 700s let me know if you may have time to do so. It would be greatly appreciated
Adrian Burns
http://analogcabin.net/
http://analogcabin.net/
- Thoughtlab
- Registered User
- Posts: 7
- Joined: Mon Jun 18, 2012 11:54 am
- Location: Sydney
Re: Vintage Synth Repair - Sydney
Sure.
PM me and we'll get in touch.
Cheers
PM me and we'll get in touch.
Cheers
Mike de Vrees
Purveyor of old stuff
Purveyor of old stuff
-
Futureman - Frequent Contributor
- Posts: 994
- Joined: Wed Mar 19, 2008 4:47 pm
- Location: Sydney
7 posts
• Page 1 of 1
Who is online
Users browsing this forum: No registered users and 10 guests