I'm looking to find an L shaped bracket for mounting a single XLR connector. Basically a small bracket with some holes punched in it. I'm trying to retrofit a new lecturn mic onto an old pulpit, and I'm hoping to find some kind of bracket I can put an XLR in the top and screw the bracket to the side of the pulpit. The pulpit has some pretty thick wood and I'm not keen on drilling a hole in it to mount the XLR in, I'd rather just put a couple of small screw holes in the side (i.e. not so permanent).
I've been searching for something like this but haven't had much luck.
- It is currently Sat Apr 20, 2024 6:47 am • All times are UTC + 10 hours [ DST ]
Single XLR Bracket
Moderators: rick, Mark Bassett
7 posts
• Page 1 of 1
Single XLR Bracket
Owen Butcher
- obutcher
- Registered User
- Posts: 216
- Joined: Wed Jun 30, 2010 4:35 pm
- Location: Sydney
Re: Single XLR Bracket
Can only suggest Bunnings Owen.
They have many aluminium brackets of different shapes and sizes that could suit what you're after.
Good luck!
They have many aluminium brackets of different shapes and sizes that could suit what you're after.
Good luck!
Ben Moore
Harvest Recordings
Website: http://www.harvestrecordings.com.au
Facebook: http://www.faceback.com/harvestrecordings
Harvest Recordings
Website: http://www.harvestrecordings.com.au
Facebook: http://www.faceback.com/harvestrecordings
-
Ben M - Valued Contributor
- Posts: 1920
- Joined: Fri Jul 04, 2008 11:54 am
- Location: Sydney and Kangaroo Valley, NSW
Re: Single XLR Bracket
I reckon bunnings bracket and use a hole saw and drill press to make an XLR cutout in it?
Nick Franklin
Record Producer: http://www.nickfranklin.net
Custom Built Audio Electronics: http://www.nfaudio.com
Record Producer: http://www.nickfranklin.net
Custom Built Audio Electronics: http://www.nfaudio.com
-
waitup - Frequent Contributor
- Posts: 773
- Joined: Fri Jul 31, 2009 3:13 pm
- Location: Sydney, NSW
Re: Single XLR Bracket
how about a small box. Say diecast alum if you need it to be tough.
Then there is just the machining ... we machine XLR holes every day around here!
Then there is just the machining ... we machine XLR holes every day around here!
-
rob - TRM Endorsed
- Posts: 1011
- Joined: Tue May 10, 2005 9:16 pm
- Location: Adelaide
Re: Single XLR Bracket
+1 for Rob, we use little Die cast boxes whenever we need a single XLR or an XLR and Headphone socket mounted under a desk or somewhere we can't put a Plate with cough switch/Volume control.
Alastair Reynolds
Broadcast Radio Engineer
Master of the Dark Arts (Broadcast)
Broadcast Radio Engineer
Master of the Dark Arts (Broadcast)
-
Alastair Reynolds - TRM Endorsed
- Posts: 475
- Joined: Mon Dec 04, 2006 1:51 pm
- Location: Sydney
Re: Single XLR Bracket
I'd try this from Wes Components
1 x XLRP1 (stainless steel wall plate with 1 hole cutout for neutrik-style connector)
1 x MBL1 (wall plate stand-off)
Works out to be about $7 and will attach to the lectern and look great. I know the part numbers because I ordered a bunch today for a similar job.
Chris
1 x XLRP1 (stainless steel wall plate with 1 hole cutout for neutrik-style connector)
1 x MBL1 (wall plate stand-off)
Works out to be about $7 and will attach to the lectern and look great. I know the part numbers because I ordered a bunch today for a similar job.
Chris
- Linear
- Frequent Contributor
- Posts: 551
- Joined: Tue May 24, 2005 8:04 am
- Location: Sydney
Re: Single XLR Bracket
Cheers for the responses guys. I figured a trip to Bunnings was likely, but that combo from Chris is looking like a good plan. Tidy and neat!
Owen Butcher
- obutcher
- Registered User
- Posts: 216
- Joined: Wed Jun 30, 2010 4:35 pm
- Location: Sydney
7 posts
• Page 1 of 1
Who is online
Users browsing this forum: No registered users and 3 guests