Panning drums

Let's talk about kits and mics, new and old. What are you using? What do you want? What's the difference?

Moderators: ChrisW, rick, Mark Bassett

Panning drums

Postby Drumstruck » Wed Jul 16, 2014 11:50 am

One of the few topics that doesn't seem to have been covered....

What's your preference? Where do you place them? Why? Why not? hmmmm?

For me, being a drummer (ha!) I always imagine the kit from the driver's seat, so things are panned to match the kit arrayed around me and usually the drums are placed centrally (3-D) in the mix
Ian Dare
Drumstruck
Valued Contributor
Valued Contributor
 
Posts: 1589
Joined: Fri Sep 17, 2010 12:37 pm
Location: NSW South Coast

Re: Panning drums

Postby Wiz » Wed Jul 16, 2014 11:52 am

audience perspective
Peter Knight

Cant ego loquemur Latine

http://www.peterknightmusician.com
Wiz
Valued Contributor
Valued Contributor
 
Posts: 1147
Joined: Thu Dec 03, 2009 10:17 pm

Re: Panning drums

Postby Engininja » Wed Jul 16, 2014 12:04 pm

Drummers perspective.
Or mono.
Engininja
Registered User
Registered User
 
Posts: 106
Joined: Fri Jan 15, 2010 12:53 pm

Re: Panning drums

Postby Kurt » Thu Jul 17, 2014 9:45 am

Audience perspective. The other way feels wrong to me!
Kurt Neist
Chief cook and bottle washer - Metalworx
User avatar
Kurt
Valued Contributor
Valued Contributor
 
Posts: 1235
Joined: Sat May 07, 2005 1:02 am
Location: Canberra

Re: Panning drums

Postby Drumstruck » Thu Jul 17, 2014 10:24 am

When you say "audience perspective" do you mean largely mono?
Ian Dare
Drumstruck
Valued Contributor
Valued Contributor
 
Posts: 1589
Joined: Fri Sep 17, 2010 12:37 pm
Location: NSW South Coast

Re: Panning drums

Postby Kurt » Thu Jul 17, 2014 10:53 am

Dunno what gigs you're going to Ian but I certainly don't mix drums mono live.
Kurt Neist
Chief cook and bottle washer - Metalworx
User avatar
Kurt
Valued Contributor
Valued Contributor
 
Posts: 1235
Joined: Sat May 07, 2005 1:02 am
Location: Canberra

Re: Panning drums

Postby JoshuaWhitehead » Thu Jul 17, 2014 11:42 am

Occasionally when listening to others recordings on headphones i'll have to flip them around to keep those hats on the left. Really get used to what your used to!

Nothing more disorentating than early Beatles with the kit on one side through headphones. Stick to speakers for that. (Or the proper mono release)
Joshua Whitehead
Crosstown Soundstudio
JoshuaWhitehead
Registered User
Registered User
 
Posts: 28
Joined: Thu Oct 17, 2013 4:44 pm
Location: Preston. Melbourne

Re: Panning drums

Postby Ben M » Thu Jul 17, 2014 11:53 am

In the studio - drummers perspective

Live - audience perspective
User avatar
Ben M
Valued Contributor
Valued Contributor
 
Posts: 1920
Joined: Fri Jul 04, 2008 11:54 am
Location: Sydney and Kangaroo Valley, NSW

Re: Panning drums

Postby Paul Maybury » Thu Jul 17, 2014 12:12 pm

Mono or drummers perspective.
Or hard panned to one side. I really like that.
Paul
Paul Maybury
Frequent Contributor
Frequent Contributor
 
Posts: 705
Joined: Tue Nov 17, 2009 3:07 pm
Location: Melbourne

Re: Panning drums

Postby stosostu » Thu Jul 17, 2014 1:29 pm

The only issue I have with mixing live to anything other than mono, especially for a seated audience, is that only the patrons in the centre line seats will hear all of the drums, those on the extreme right or left will only hear half.

In recordings I pan for audience perspective.
Bob Charman - Stockport Sound, SA
The Road Goes On Forever and the Party Never Ends..........
User avatar
stosostu
Regular Contributor
Regular Contributor
 
Posts: 458
Joined: Fri Jul 23, 2010 3:17 pm
Location: Clare and Gilbert Valleys, South Australia

Re: Panning drums

Postby Kurt » Thu Jul 17, 2014 1:41 pm

I never pan mono sources hard left/right for exactly that reason, though I've never mixed for a seated audience.
Kurt Neist
Chief cook and bottle washer - Metalworx
User avatar
Kurt
Valued Contributor
Valued Contributor
 
Posts: 1235
Joined: Sat May 07, 2005 1:02 am
Location: Canberra

Re: Panning drums

Postby Drumstruck » Thu Jul 17, 2014 2:50 pm

Kurt wrote:Dunno what gigs you're going to Ian but I certainly don't mix drums mono live.


Gigs? Me? Nah, none of the bands I like come to Oz.....

I may have misunderstood your meaning of audience perspective - e.g. when you're in the audience the drums are usually centrally located on stage, so they don't have much width at all, thus I assumed you meant generally centred in the mix (i.e. mono).....

From the drumstool the kit sounds fairly hard-panned for ride / hats and just off-centre panned for BD / snare, and the toms span the stereo image (depending how many toms there are) - that's my panning preference.

So to elaborate on the question... do you gents hard pan any kit parts to span the width of the stereo image or just keep it (e.g.) between 30 degrees and 330 degrees (assuming 0 degrees is directly in front)?
Ian Dare
Drumstruck
Valued Contributor
Valued Contributor
 
Posts: 1589
Joined: Fri Sep 17, 2010 12:37 pm
Location: NSW South Coast

Re: Panning drums

Postby Kurt » Thu Jul 17, 2014 3:23 pm

I go for about 50% ether side for the overheads (in my set-up they are usually more like ride/hats) toms spread evenly from 50%/50% kick(s) snare centered. No hard panning.
I do the same itb, though I might widen the overheads if they maintain a strong image.
Kurt Neist
Chief cook and bottle washer - Metalworx
User avatar
Kurt
Valued Contributor
Valued Contributor
 
Posts: 1235
Joined: Sat May 07, 2005 1:02 am
Location: Canberra

Re: Panning drums

Postby Chinagraf » Thu Jul 17, 2014 5:05 pm

I will often keep the overheads a bit narrower in verses and automate to hard wide in the choruses to give it a bit of a bigger wider feel. I usually have the hhat on the right so I guess i am panning from audience pers. but I play left handed so to me it is drummers pers.
I don't like toms super wide but I'll usually let the image in the overheads determine where I pan the close mics.
I've also mucked around a bit with having the lower end say below 80 split off the toms and sent to a mono buss that is panned centre, so the bottom end of the mix isn't bouncing all over the stereo image,which I like.
User avatar
Chinagraf
Valued Contributor
Valued Contributor
 
Posts: 1608
Joined: Wed Jun 22, 2005 1:09 am
Location: Melbourne

Re: Panning drums

Postby Toddo » Wed Apr 29, 2015 7:22 pm

For live, I usually mix pretty mono so everyone gets the same experience. Only a small portion of the audience would benefit from the stereo image, most (at least 2/3rds) are only really hearing either left or right speaker.

For albums, stereo all the way.

I mix drums from the listener's perspective as that's where 99% of the population would be used to hearing it from, not that they really care.
Tod Deeley
Recording & Live Engineer/ Mixer/ Editor, Sound A/V Technician.
http://www.toddeeley.com.au
Toddo
Registered User
Registered User
 
Posts: 24
Joined: Tue Jun 22, 2010 1:00 am
Location: Sydney

Re: Panning drums

Postby Simon B » Sun May 24, 2015 2:16 am

I pan from drummers perspective.

I asked a lot of people about this, every drummer I spoke to was adamant it needed to be from drummers perspective.

Every drumming engineer was adamant it needed to be from drummers perspective.

The deal breaker for me was an engineer who was also a drummer pointed out he pans during tracking, so drummers perspective it is.

So from that point on it was always drummers perspective.
Hello my name is Simon Bray and I like guitar amps, currently at 20 something.

http://www.ponymusic.com.au/record/
Simon B
Regular Contributor
Regular Contributor
 
Posts: 323
Joined: Sat May 07, 2005 6:18 am
Location: Melbourne

Re: Panning drums

Postby Chris H » Sun May 24, 2015 10:14 pm

I also go with the drummers perspective and place the close mics where they are in the OH's stereo field.
Chris Hallam.
https://soundcloud.com/hallamsound
Whatever floats your boat.
User avatar
Chris H
Forum Veteran
Forum Veteran
 
Posts: 2319
Joined: Mon May 09, 2005 11:20 am
Location: Off The Planet

Re: Panning drums

Postby heathen » Sat May 30, 2015 7:17 pm

I don't understand going for drummers perspective, whenever I was mixing I'd pretend I was in the audience looking and listening to a band and building the sound stage accordingly from audience perspective, it just made more sense to do it that way. Not many people watch from behind the stage so why mix it that way...... I mix live the same way or mono, depening on the rig.
Heath Smith
User avatar
heathen
Valued Contributor
Valued Contributor
 
Posts: 1745
Joined: Sun May 08, 2005 11:15 pm
Location: Sydney


Return to Recording Drums?

Who is online

Users browsing this forum: No registered users and 5 guests


cron