So over the last few months noticed that a couple of the more vintage dynamics mics in the cupboard have becoming thin sounding. Those being:
Beyer M88-n - occasional crackling & just really thin, no more awesome low end thud
Telefunken 'hand grenade' omni (unknown of model...) - again, crackling and no low end.
AKG D12e - this was purchased with not much low end so hopeful could be revived.
Sent them to Peter @ http://www.drefahlaudio.com/ after reading some great reviews about him. Anyone else used him?
Long story short m88 is dead but can be revived with newer parts as capsule is beyond repair, probably around the $350 AUS mark. Telefunken is dead without butchering it as it's a collectors piece, mission impossible...
& Akg is able to be revived but will loose a smidgen of low end, unknown of costs yet. Reading that email was not the best thing to wake up to this morning to be honest!!!
I'm sure you've all got worse horror stories than that related to older mics but just needed to vent my frustration on the matter...
On another note I got an old Russian talk back mic working yesterday & studio buddy Paul repaired a Cadenza ribbon recently too so I suppose life ain't all take.
now, who's got an m88-n for sale?
Dave
- It is currently Fri Mar 29, 2024 10:07 pm • All times are UTC + 10 hours [ DST ]
'Vintage' mics, the costs involved
Moderators: rick, Mark Bassett
9 posts
• Page 1 of 1
'Vintage' mics, the costs involved
Dave Cooper
E - dave @ soundmachinestudios . com . au
W - soundmachinestudios.com.au
E - dave @ soundmachinestudios . com . au
W - soundmachinestudios.com.au
- dave01.cooper
- Regular Contributor
- Posts: 448
- Joined: Wed Oct 06, 2010 3:49 pm
- Location: Melbourne
Re: 'Vintage' mics, the costs involved
I've never had a problem with old EV's. Or Sony's for that matter.
Old European mics, on the other hand......
Old European mics, on the other hand......
- Paul Maybury
- Frequent Contributor
- Posts: 705
- Joined: Tue Nov 17, 2009 3:07 pm
- Location: Melbourne
Re: 'Vintage' mics, the costs involved
Generally speaking vintage recording equipment and old wooden boats have a lot in common re maintenance costs!
Chris Hallam.
https://soundcloud.com/hallamsound
Whatever floats your boat.
https://soundcloud.com/hallamsound
Whatever floats your boat.
-
Chris H - Forum Veteran
- Posts: 2319
- Joined: Mon May 09, 2005 11:20 am
- Location: Off The Planet
Re: 'Vintage' mics, the costs involved
I gave up on old dynamics long ago , even if you can get the nos parts its not worth the money , i only want microphones that work properly .
having old mics is all about knowing what the value of the parts is when buying them
people are always amazed at the price I buy vintage neumanns for .. ( cheap) but in the long run by the time they are restored back to A1 they have cost me about the going price anybody else pays on ebay .. except mine will go for another 60 years because I know the work is done .
Sometimes I get a real score of a deal ..but usally the only reason people sell microphones is there is something wrong with them and they need the money .
Vintage Microphones are expensive any way you look at it , Vintage dynamics would have to be nearly free for me to ever buy another one .
having old mics is all about knowing what the value of the parts is when buying them
people are always amazed at the price I buy vintage neumanns for .. ( cheap) but in the long run by the time they are restored back to A1 they have cost me about the going price anybody else pays on ebay .. except mine will go for another 60 years because I know the work is done .
Sometimes I get a real score of a deal ..but usally the only reason people sell microphones is there is something wrong with them and they need the money .
Vintage Microphones are expensive any way you look at it , Vintage dynamics would have to be nearly free for me to ever buy another one .
Rick O'Neil
I think we went to different schools together
turtlerockmastering.com
we listen
I think we went to different schools together
turtlerockmastering.com
we listen
-
rick - Moderator
- Posts: 3486
- Joined: Fri May 06, 2005 8:02 pm
- Location: Sydney
Re: 'Vintage' mics, the costs involved
Very Solid advice Rick.
Problem is I love the sound of old dynamics! Especially omni dynamics, when used in the right room on the right source they just sound awesome.
Where do you source your capsules and spare parts from Rick? We blew a ribbon on an old Cadenza mic last week on an overly loud gtr cab and need to replace. I'd like to give it a crack and repair my self as it'll give me good practice to tinker with other mics as never really touched mics, only outboard/consoles/cabling.
Speaking of Neumann collection, how many do you own now?!
Cheers
Problem is I love the sound of old dynamics! Especially omni dynamics, when used in the right room on the right source they just sound awesome.
Where do you source your capsules and spare parts from Rick? We blew a ribbon on an old Cadenza mic last week on an overly loud gtr cab and need to replace. I'd like to give it a crack and repair my self as it'll give me good practice to tinker with other mics as never really touched mics, only outboard/consoles/cabling.
Speaking of Neumann collection, how many do you own now?!
Cheers
Dave Cooper
E - dave @ soundmachinestudios . com . au
W - soundmachinestudios.com.au
E - dave @ soundmachinestudios . com . au
W - soundmachinestudios.com.au
- dave01.cooper
- Regular Contributor
- Posts: 448
- Joined: Wed Oct 06, 2010 3:49 pm
- Location: Melbourne
Re: 'Vintage' mics, the costs involved
dave01.cooper wrote:... We blew a ribbon on an old Cadenza mic last week on an overly loud gtr cab and need to replace. I'd like to give it a crack and repair my self as it'll give me good practice to tinker with other mics as never really touched mics, only outboard/consoles/cabling.
...
There are a few people on ebay selling kits for ribbon mic repairs around the $20 mark. You will need to cut the foil to size which is a bit of a challenge, and also finding something to corrugate the cut ribbon with. You can have a play with using kitchen foil to get a taste of whats involved, but is much harder with the thinner foils. I didn't mind kitchen foil on guitar amps, esp if you blend with a dynamic mic, but the top end response will take a hit. At least you will see if its something you are up for, or you might decide to send it off to someone to re-ribbon it professionally.
Cheers
Michael Luchich
Alternation.com.au
Walcha NSW
Alternation.com.au
Walcha NSW
- lonearranger
- Registered User
- Posts: 217
- Joined: Sat Mar 01, 2008 11:13 am
- Location: Walcha NSW
Re: 'Vintage' mics, the costs involved
There are a few people on ebay selling kits for ribbon mic repairs around the $20 mark. You will need to cut the foil to size which is a bit of a challenge, and also finding something to corrugate the cut ribbon with. You can have a play with using kitchen foil to get a taste of whats involved, but is much harder with the thinner foils.
Great info thanks I'll have a look and give it a go!
Dave Cooper
E - dave @ soundmachinestudios . com . au
W - soundmachinestudios.com.au
E - dave @ soundmachinestudios . com . au
W - soundmachinestudios.com.au
- dave01.cooper
- Regular Contributor
- Posts: 448
- Joined: Wed Oct 06, 2010 3:49 pm
- Location: Melbourne
Re: 'Vintage' mics, the costs involved
Communist with M88 capsule looking to meet up with communist with M88 transformer ...
If your M88 capsule is dead, is the transfomer OK? If so, can I buy it from you?
If your M88 capsule is dead, is the transfomer OK? If so, can I buy it from you?
Chris Preston
The man who gives meaning to the word amateur
The man who gives meaning to the word amateur
-
chrisp - Registered User
- Posts: 162
- Joined: Wed Apr 08, 2015 7:55 pm
- Location: Sunny warm Canberra
Re: 'Vintage' mics, the costs involved
Communist 1 agrees with communist 2 - will toe party line accordingly!
Send us an email on
dave@soundmachinestudios.com.au
to discuss world domination further...
On another note, got the D12e back. Sounds wonderful, full, rich and 'heavy' sounding. Tried it on my 24" Gas kick drum with a pop filter -> Chandler TG -> 1176LN (not doing more than 2db GR) and sounds awesome. Not for all styles but very useable
Send us an email on
dave@soundmachinestudios.com.au
to discuss world domination further...
On another note, got the D12e back. Sounds wonderful, full, rich and 'heavy' sounding. Tried it on my 24" Gas kick drum with a pop filter -> Chandler TG -> 1176LN (not doing more than 2db GR) and sounds awesome. Not for all styles but very useable
Dave Cooper
E - dave @ soundmachinestudios . com . au
W - soundmachinestudios.com.au
E - dave @ soundmachinestudios . com . au
W - soundmachinestudios.com.au
- dave01.cooper
- Regular Contributor
- Posts: 448
- Joined: Wed Oct 06, 2010 3:49 pm
- Location: Melbourne
9 posts
• Page 1 of 1
Return to You've gotta start somewhere.
Who is online
Users browsing this forum: No registered users and 2 guests