Goldentone Guitar Amps - Old OZ amps

An audio community like no other.

Moderators: rick, Mark Bassett

Goldentone Guitar Amps - Old OZ amps

Postby chrisp » Sat Feb 03, 2018 1:24 pm

I'm in the process of stripping down a friend's Rose Music Goldentone 1960's valve amp (2 channel, normal and tremolo) to see if I can track down a signal fault. For those unfamiliar these were Ozzie designed and built, usually point to point wired, valve amps. This one has a lovely Rola 12" AlNiCo for its speaker.

What I didn't know is that the tubes used in this thing (a pair of 12AX7s and a pair of 6GW8s) were also Australian made - a brand called Miniwatt. Apparently there were up there with Phillips and AWA as quality tubes. The 6GW8 was originally I believe designed as a TV signal amp tube, but adapted by a few Aussie amp designers for guitar amp use.

I really hope I can track this fault down 'cause I'd love to get this beast warmed up (yes, I do know about power and capacitor issues with old amps that have sat unused for a while) and give it a burl. But I am also lamenting the demise of Australian electronics manufacturing - we don't make valves here anymore, do we? ... and I know of perhaps one audio transformer manufacturer, out at Hornsby.
Chris Preston
The man who gives meaning to the word amateur
User avatar
chrisp
Registered User
Registered User
 
Posts: 101
Joined: Wed Apr 08, 2015 7:55 pm
Location: Sunny warm Canberra

Re: Goldentone Guitar Amps - Old OZ amps

Postby Chris H » Sat Feb 03, 2018 8:02 pm

It's well worth getting that amp going Chris. There is a company here in Melbourne making hand wound transfirmers for audio. They are currently re building their website but it's worth a look.

http://www.black-art.com.au/audio/index.php

Contact Black Art
Black Art Audio, Melbourne, Australia

Australian Phone: (03) 9588 0643
Australian Fax: (03) 9588 1702
International Phone (+61) (3) 9588 0643 [Please note! GMT plus 10 hours]
International Fax (+61) (3) 9588 1702

You do not have the required permissions to view the files attached to this post.
Chris Hallam.
https://soundcloud.com/hallamsound
Whatever floats your boat.
User avatar
Chris H
Forum Veteran
Forum Veteran
 
Posts: 2263
Joined: Mon May 09, 2005 11:20 am
Location: Off The Planet

Re: Goldentone Guitar Amps - Old OZ amps

Postby bangaroo » Sun Feb 04, 2018 1:40 pm

Hi Chris,
If you haven’t already then check out the Aussie Guitar Gear Heads forum (AGGH!)
http://www.guitargear.net.au/discussion/index.php

A wealth of information with some top amp builders/repairers often dropping in.
Rob Hardy
bangaroo
Registered User
Registered User
 
Posts: 20
Joined: Mon May 10, 2010 8:56 pm
Location: Sydney

Re: Goldentone Guitar Amps - Old OZ amps

Postby stosostu » Mon Feb 05, 2018 11:20 am

The Classic Australian Valve Amps page has a whole section on Goldentone, http://www.ozvalveamps.org/

Unfortunately, the originator of the page, Roly Roper, has passed away, but the enthusiasts from AGGH still maintain the page. It has details of the various models, including photos and schematic diagrams.

Well worth a visit.
Bob Charman - Stockport Sound, SA
The Road Goes On Forever and the Party Never Ends..........
User avatar
stosostu
Regular Contributor
Regular Contributor
 
Posts: 435
Joined: Fri Jul 23, 2010 3:17 pm
Location: Clare and Gilbert Valleys, South Australia


Return to The Turtlerock Forum

Who is online

Users browsing this forum: No registered users and 0 guests