Hey Guys,
Need some help here.
I had some equipment in storage for a few months at mum's place. It was moved into a garage that flooded.
Nothing liquid physically touched any equipment, but I'm seeing a lot of surface corrosion on my gear.
Some things like my midi controller are now covered in rust, but I am mostly concerned about my amp, a TriAxis and Stereo simul 2:90
The cases look pretty clean, but there is some corrosion visible near the tube mounts.
I'm not game to even turn them on, can anyone recommend a Mesa Boogie tech in Sydney to assess them?
If they are really stuffed I will fly them to Mesa in the states myself, but I don't want to do that if not necessary.
Thanks in Advance!
Smash.
- It is currently Fri May 03, 2024 11:39 am • All times are UTC + 10 hours [ DST ]
Help: Mesa Boogie Tech
Moderators: rick, Mark Bassett
6 posts
• Page 1 of 1
- smash
- Regular Contributor
- Posts: 442
- Joined: Tue Jun 07, 2005 12:49 am
- Location: Northern Beaches, Sydney
Re: Help: Mesa Boogie Tech
Anyone?
If not, is there a really epic Amp tech around?
I basically want to know if it is safe to turn on, or if it will risk further damage.
Thanks,
Smash.
If not, is there a really epic Amp tech around?
I basically want to know if it is safe to turn on, or if it will risk further damage.
Thanks,
Smash.
- smash
- Regular Contributor
- Posts: 442
- Joined: Tue Jun 07, 2005 12:49 am
- Location: Northern Beaches, Sydney
Re: Help: Mesa Boogie Tech
Sherlock amps in Melbourne but as your from Nthn Beaches try these i found on the net
http://www.ozvalveamps.org/valvetechs.htm
or:
http://www.guitarfactory.net/pages/the- ... pairs.html
who recoment the tech's below.
Southside Electronics (Kingsgrove) - 1300 652 513 Click for website
Standard Ampworks (Ryde) - 0438 459 867 Click for website
Earthling Designs (Darlinghurst) - 0438 536 407 Click for website
http://www.ozvalveamps.org/valvetechs.htm
or:
http://www.guitarfactory.net/pages/the- ... pairs.html
who recoment the tech's below.
Southside Electronics (Kingsgrove) - 1300 652 513 Click for website
Standard Ampworks (Ryde) - 0438 459 867 Click for website
Earthling Designs (Darlinghurst) - 0438 536 407 Click for website
Chris Hallam.
https://soundcloud.com/hallamsound
Whatever floats your boat.
https://soundcloud.com/hallamsound
Whatever floats your boat.
-
Chris H - Forum Veteran
- Posts: 2319
- Joined: Mon May 09, 2005 11:20 am
- Location: Off The Planet
Re: Help: Mesa Boogie Tech
Tim Mason, the guru of all things valvish:
Woodford, Blue Mountains 4758 8351 0424 511 009
Milo
Woodford, Blue Mountains 4758 8351 0424 511 009
Milo
John Summers
- Milo
- Registered User
- Posts: 233
- Joined: Wed Dec 19, 2007 8:37 am
- Location: Sydney
Re: Help: Mesa Boogie Tech
You could call Mesa / Pro Audio (Mesa rep in Aus)
They'll both recommend Mark @ Megtronics - mark@megtronics.com
He's the legit Mesa tech in Aus and has been doing it for decades - He re-capped and serviced my vintage Mark II recently and was able to get mesa branded components direct from them etc..
Couldn't recommend him enough.
Although it sounds like any competent tech could probably help you out!
They'll both recommend Mark @ Megtronics - mark@megtronics.com
He's the legit Mesa tech in Aus and has been doing it for decades - He re-capped and serviced my vintage Mark II recently and was able to get mesa branded components direct from them etc..
Couldn't recommend him enough.
Although it sounds like any competent tech could probably help you out!
Peter Holz
www.peterholz.com
www.peterholz.com
-
peat - Regular Contributor
- Posts: 381
- Joined: Mon Nov 06, 2006 6:19 pm
- Location: Sydney
Re: Help: Mesa Boogie Tech
Thanks for all the advice guys!!
I'm looking forward to getting her up and running again
Smash.
Simon "Smash" Ashby.
I'm looking forward to getting her up and running again
Smash.
Simon "Smash" Ashby.
- smash
- Regular Contributor
- Posts: 442
- Joined: Tue Jun 07, 2005 12:49 am
- Location: Northern Beaches, Sydney
6 posts
• Page 1 of 1
Return to The Turtlerock Forum
Who is online
Users browsing this forum: No registered users and 6 guests