AKG D202 CS mic info.

An audio community like no other.

Moderators: rick, Mark Bassett

AKG D202 CS mic info.

Postby Thirteen » Sun Sep 21, 2008 12:55 pm

I have a D202 CS here (I think these things are a dual capsule cardioid?) but it uses a small 3 pin plug, I am trying to figure out if it is a mini XLR or some other format. Does anyone have one of these mics? I want to sell it, but I need to make up a cable to test it with first, so i would be interested in any info on the connector that they used.
User avatar
Thirteen
TRM Endorsed
TRM Endorsed
 
Posts: 1279
Joined: Fri Dec 01, 2006 5:08 pm
Location: Sydney

Postby 13thbeach » Sun Sep 21, 2008 5:45 pm

Yeah I have one of those. Its a pretty cool mic. I don't know much about it though. Mine also have the same small 3 pin style connector. It seems to screw on to connect to the mic rather than click in like a regular xlr. I just wired it to a standard xlr. Works fine. There sees to be a lot of these up on eBay of late. Although they are good mics, I personally think they are not worth the price being asked on ebay but hey, its up to you what you think its worth right.
User avatar
13thbeach
Frequent Contributor
Frequent Contributor
 
Posts: 843
Joined: Wed May 18, 2005 12:31 pm
Location: Sunny Altona

Postby Barney Loveland » Sun Sep 21, 2008 6:03 pm

I repaired one of these recently, from memory it had a din plug on it. I have the pin out somewhere for it. If you take it apart make sure you document it as it is quite a complex construction!!!

Sound wise the owner had 4 of them in mint condition and sold them all as they were somewhat similar to a 57ish sound and used the funds for other studio purchases. Not bad for a find in his Uncles basement
Barney Loveland
Frequent Contributor
Frequent Contributor
 
Posts: 523
Joined: Mon May 09, 2005 5:28 pm
Location: Melbourne

Postby rob » Sun Sep 21, 2008 7:38 pm

yep; 3 way DIN socket with screwthread. These are common on many older mics

RS and Farnell sell suitable in line cable sockets.

Rob
User avatar
rob
TRM Endorsed
TRM Endorsed
 
Posts: 1011
Joined: Tue May 10, 2005 9:16 pm
Location: Adelaide

Postby Thirteen » Sun Sep 21, 2008 7:48 pm

rob wrote:yep; 3 way DIN socket with screwthread. These are common on many older mics

RS and Farnell sell suitable in line cable sockets.

Rob


Thanks Rob, I will order one from Farnell tomorrow and make up an adaptor cable to make sure that the mic is OK before I sell it. Anyone have an idea of a reasonable price for the mic?
User avatar
Thirteen
TRM Endorsed
TRM Endorsed
 
Posts: 1279
Joined: Fri Dec 01, 2006 5:08 pm
Location: Sydney


Return to The Turtlerock Forum

Who is online

Users browsing this forum: No registered users and 16 guests


cron