Hi everyone, I'm looking for a Sydney tech to service a Hammond and/or Leslie cabinet. The speaker makes a clicking noise once every 3 seconds or so. If anyone can point me in the right direction it'll be much appreciated!
Regards,
James
- It is currently Mon Jul 27, 2026 11:37 am • All times are UTC + 10 hours [ DST ]
Hammond / Leslie Repair Sydney
Moderators: rick, Mark Bassett
11 posts
• Page 1 of 1
Hammond / Leslie Repair Sydney
by James Chia » Mon Mar 29, 2010 12:28 pm
Last edited by James Chia on Tue Mar 30, 2010 9:05 pm, edited 1 time in total.
James Chia
- James Chia
- Registered User
- Posts: 46
- Joined: Sun Aug 09, 2009 2:21 am
- Location: Sydney
by jkhuri44 » Mon Mar 29, 2010 2:19 pm
perhaps try calling Smithy's and seeing if any of the geezer's there can point u in the right direction?
or give Steve a buzz, from this forum (username: Thirteen) and see if he can point u in the right direction...
or give Steve a buzz, from this forum (username: Thirteen) and see if he can point u in the right direction...
Jamil Khuri
Amusement & Audio Engineer
"it's not awesome unless its 240bpm with distorted 909 kicks!"
Amusement & Audio Engineer
"it's not awesome unless its 240bpm with distorted 909 kicks!"
- jkhuri44
- Forum Veteran
- Posts: 2537
- Joined: Wed Sep 20, 2006 10:53 pm
- Location: Dundas
by aside » Tue Mar 30, 2010 6:54 am
I use Stan Holroyd - excellent tech specialising in vintage keys.
PM me for his details.
cheers
PM me for his details.
cheers
Last edited by aside on Tue Mar 30, 2010 8:47 pm, edited 1 time in total.
Anton Hagop - lover of Les Pauls and Heineken, preferably at the same time.
-
aside - Registered User
- Posts: 80
- Joined: Sat Aug 23, 2008 5:33 pm
Hammond leslie servicing
by analogpro » Tue Mar 30, 2010 3:28 pm
Hi There,
if you don't have any success with Stan a mate of mine in Melbourne who specialises in Hammonds and Leslies does go up to Sydney occasionally. If you need his contact details let me know.
Cheers Garry Lynch
if you don't have any success with Stan a mate of mine in Melbourne who specialises in Hammonds and Leslies does go up to Sydney occasionally. If you need his contact details let me know.
Cheers Garry Lynch
Garry Lynch : Analogpro
- analogpro
- Registered User
- Posts: 6
- Joined: Sun Mar 21, 2010 10:23 pm
- Location: Brisbane
by 13thbeach » Tue Mar 30, 2010 7:21 pm
Hi Garry,
Welcome to the forum,
Who is the guy you know? I'm in Melbourne and have an L100 which could do with a service.
Cheers.
Welcome to the forum,
Who is the guy you know? I'm in Melbourne and have an L100 which could do with a service.
Cheers.
Mat Robins
Coloursound Recording Studio
Coloursound Recording Studio
-
13thbeach - Frequent Contributor
- Posts: 843
- Joined: Wed May 18, 2005 12:31 pm
- Location: Sunny Altona
Re: Hammond / Leslie Repair Sydney / Melb
by EvLoutonian » Mon Oct 27, 2014 5:28 pm
I didn't know you had a Hammond L100, Mat..
It does ring a bell, now that I think about it, but organs have not really been my thing in the past..
Anyway, I just got one here, too - so once again, it seems like I really am following in your footsteps!
I just gave Geoff from Doppler Audio a call about maybe coming out some time and having a check over it for me, just to see if it could do with any tweaks or changes or general servicing.
Did you have any particular things done on yours?
Someone recommended perhaps looking at the line out and seeing if the signal could be improved for optimal external processing or output to rotating speaker cab etc.
I'm gonna try to optimise the L100 to match up with an old (British made) Sharma amp / rotating speaker cab that I have here (which emitted smoke last time I turned it on.. hmm)
Keen to hear any tips before having this stuff looked over.
CHEERs, y'all.
It does ring a bell, now that I think about it, but organs have not really been my thing in the past..
Anyway, I just got one here, too - so once again, it seems like I really am following in your footsteps!
I just gave Geoff from Doppler Audio a call about maybe coming out some time and having a check over it for me, just to see if it could do with any tweaks or changes or general servicing.
Did you have any particular things done on yours?
Someone recommended perhaps looking at the line out and seeing if the signal could be improved for optimal external processing or output to rotating speaker cab etc.
I'm gonna try to optimise the L100 to match up with an old (British made) Sharma amp / rotating speaker cab that I have here (which emitted smoke last time I turned it on.. hmm)
Keen to hear any tips before having this stuff looked over.
CHEERs, y'all.
Evan Lorden, Well Worn Workshops, Melbourne
- EvLoutonian
- Registered User
- Posts: 234
- Joined: Wed Jun 09, 2010 12:46 pm
- Location: Melbourne
Re: Hammond / Leslie Repair Sydney
by The Tasmanian » Wed Oct 29, 2014 11:20 pm
Hey James
Stan is the man!
Stan is the man!
C h r i z t o w n o
- The Tasmanian
- Valued Contributor
- Posts: 1901
- Joined: Thu Nov 27, 2008 8:04 am
- Location: Deep in the woods....
Re: Hammond / Leslie Repair Sydney
by Thirteen » Thu Oct 30, 2014 9:58 pm
I always refer organ servicing to Stan Holroyd in Sydney.
Steve Jones
-
Thirteen - TRM Endorsed
- Posts: 1279
- Joined: Fri Dec 01, 2006 5:08 pm
- Location: Sydney
Re: Hammond / Leslie Repair Sydney
by psycho_monkey » Tue Nov 11, 2014 12:10 am
Another vote for Stan..just don't make him too busy, I need him as soon as we get a free day!
- psycho_monkey
- Registered User
- Posts: 20
- Joined: Fri Jun 08, 2012 3:38 pm
11 posts
• Page 1 of 1
Return to The Turtlerock Forum
Who is online
Users browsing this forum: No registered users and 33 guests