studio interconnections and panels

An audio community like no other.

Moderators: rick, Mark Bassett

studio interconnections and panels

Postby mylesgm » Tue Apr 21, 2015 11:03 am

Advice requested...

What do you think is important in the modern studio to interconnect between recording areas and control room areas? xlr i/o obviously but ethernet, optical, usb, coax??? Considering the ubiquitousness of wireless.

My initial thought is "D" footprint connectors, for all sockets and leave a few open for expansion. Pick the amount of xlr i/o needed and then two ethernet and done. Thoughts?
Myles Mumford
Producer/Composer/Engineer/Sound Artist
Making records in sunny Melbourne

www.mylesmumford.com
User avatar
mylesgm
Valued Contributor
Valued Contributor
 
Posts: 1964
Joined: Mon Feb 09, 2009 6:48 pm

Re: studio interconnections and panels

Postby waitup » Tue Apr 21, 2015 12:04 pm

Run plenty of ethernet. It's nice and cheap and you can convert to all kinds of things with boxes at each end.

Also maybe HDMI if you imagine ever doing ADR type work or wanting to set up a screen in the recording space.

Proper coaxial guitar cable with TS at each is good for tie lines. Speaker cable terminated on TS for running heads in control room/cabinet in live space.
Nick Franklin
Record Producer: http://www.nickfranklin.net
Custom Built Audio Electronics: http://www.nfaudio.com
User avatar
waitup
Frequent Contributor
Frequent Contributor
 
Posts: 773
Joined: Fri Jul 31, 2009 3:13 pm
Location: Sydney, NSW

Re: studio interconnections and panels

Postby Sammas » Tue Apr 21, 2015 2:40 pm

Neutrik combo Speakon/TS jacks are handy for speaker interconnections. It makes them hard to confuse with guitar lines!
Sammas
 

Re: studio interconnections and panels

Postby jasound » Wed Apr 22, 2015 10:25 am

In a modern studio Ethernet everywhere.
jasound
Registered User
Registered User
 
Posts: 181
Joined: Tue Nov 20, 2007 2:32 pm
Location: SYDNEY AUSTRALIA

Re: studio interconnections and panels

Postby Enginearing » Wed Apr 22, 2015 2:48 pm

Definitely a couple of speaker tie-lines for running heads in control rooms and cabs in live rooms/ booths. Use speakon and and have some adaptoing cables handy.
Ben Milne
Enginearing
Registered User
Registered User
 
Posts: 50
Joined: Fri Feb 17, 2012 1:56 pm
Location: Melbourne, Victoria

Re: studio interconnections and panels

Postby Senad » Mon Apr 27, 2015 7:55 pm

Some TRS sockets for the cans...?
Senad Mu ja gic
User avatar
Senad
Frequent Contributor
Frequent Contributor
 
Posts: 581
Joined: Sat Sep 22, 2007 10:07 pm
Location: Melbourne

Re: studio interconnections and panels

Postby mylesgm » Tue Apr 28, 2015 9:51 am

Thanks for the suggestions guys, it's basically what I had in mind. In regards to the ethernet connectors what should I be using? I'm a bit confused with all the different neutrik ones cat5, cat5e, cat6 etc. Will want to do a hardline to the network and possibly use a hearback headphone system which uses ethernet cable. Tips?
Myles Mumford
Producer/Composer/Engineer/Sound Artist
Making records in sunny Melbourne

www.mylesmumford.com
User avatar
mylesgm
Valued Contributor
Valued Contributor
 
Posts: 1964
Joined: Mon Feb 09, 2009 6:48 pm

Re: studio interconnections and panels

Postby SteveL » Tue Apr 28, 2015 9:38 pm

Myles, I'd also add a midi in /out or USB to the wall plate. Capturing the event data as well as the stereo outputs of the keyboard/synths can make edits a whole lot easier! A lot of older synths/keys won't have the USB, so I'd do both midi ports, plus the USB (be handy for other things too, charging devices/computer/printer connections etc...)

Steve
Steve Lindsay
SteveL
Regular Contributor
Regular Contributor
 
Posts: 329
Joined: Thu Sep 13, 2007 12:59 pm
Location: Southern Tablelands NSW

Re: studio interconnections and panels

Postby The Tasmanian » Wed Apr 29, 2015 7:26 pm

A few hinged beer/cider- holder panels could come in handy too.
(not that I think drinking is a great studio asset.. )
C h r i z t o w n o
The Tasmanian
Valued Contributor
Valued Contributor
 
Posts: 1901
Joined: Thu Nov 27, 2008 8:04 am
Location: Deep in the woods....

Re: studio interconnections and panels

Postby andygriffiths » Sun May 03, 2015 10:34 pm

Myles, shielded cat6 should do the job
Andy Griffiths- onthebeatstudios & Andy's custom cables
http://www.onthebeatstudios.com
http://www.andyscustomcables.com
andygriffiths
Regular Contributor
Regular Contributor
 
Posts: 300
Joined: Fri Apr 13, 2012 11:30 am
Location: Brisbane


Return to The Turtlerock Forum

Who is online

Users browsing this forum: No registered users and 26 guests