Page 1 of 1
Tyan S2895 Bios Help
Posted:
Wed Jan 07, 2009 1:12 pmby tunetown
Hi Guys,
I flashed my bios to latest as I was having some weird clitches. So, after what seemed a successful flash I rebooted and now I get nothing. No Boot from either HD, DVD or floppy. It doesn't even sound like its looking. Just goes straight to a little flashing white curser in the top left of screen.
Has anyone experienced this before with this MOBO. Have I missed a setting somewhere? If so, any suggestions would be greatly appreciated. I'm hoping the MOBO is still ok. Are there other jumper settings I should try??
Thanks
Posted:
Wed Jan 07, 2009 1:44 pmby tunetown
Ok, so I cleared the CMOS with the jumper and rebooted. before entering the BIOS setup, after the memory check it said " 0251 System CMOS Checksum Bad".
I'm assuming that's not very good.
Cheers
Posted:
Wed Jan 07, 2009 1:56 pmby heathen
This won't help Pete as all I can say is, doh!
Try flashing it a few times, if you hav'nt already, I've found sometimes it needs to be done several times.
Posted:
Wed Jan 07, 2009 2:08 pmby jkhuri44
proceed with healthy dosage of fists and boots.
that helps ...wierdly enough...computers are a bit precious sometimes :)
Posted:
Wed Jan 07, 2009 2:37 pmby tunetown
heathen wrote:This won't help Pete as all I can say is, doh!
Try flashing it a few times, if you hav'nt already, I've found sometimes it needs to be done several times.
Wish I could. Can't even get a boot from floppy to reflash. I'm trying to source a new bios chip. If not I'll have to buy another MOBO. PITA.
Whilst I'm at it, can anyone sugest a great mobo for a pair of Opteron Dual core 270's.
Cheers
Posted:
Wed Jan 07, 2009 5:58 pmby heathen
I always buy my computer gear from these guys, a mate used to work there but it seems evey piece of gear I've bought here has lasted well beyond it's time.
http://www.cam1.com.au/catalog/id/160/n/components.html
I dunno actually I'm sure someone can suggest somewhere better, seems they carry less stock than they used to, maybe just give them a call.
Posted:
Wed Jan 07, 2009 7:37 pmby tunetown
Thanks Heath. I'm on the hunt for a new mobo or BIOS chip.
Posted:
Thu Jan 08, 2009 12:18 amby Kurt
Well, the mobo is certainly expensive enough tthat it'd be worth hunting down a bios chip!
These guys sell the board so they may be able to source parts..
http://ijk.com.au/branch/ijk/product_in ... _id=103218
Posted:
Thu Jan 08, 2009 7:33 amby tunetown
Great. Thanks