Page 1 of 1
002 s/pdif output issue
Posted:
Wed Jun 07, 2006 11:56 pmby Martin
got a new 002 setup in a studio connected to a mackie d8b
we'd like to run the s/pdif into the digital input 2 on the desk and monitor off that when mixing to save another conversion stage
the 002 is supposed to mirror the output of the main outs (analog 1&2) through s/pdif..
we can't seem to get any signal from the 002 digital out, the recieving devices will detect a carrier signal (clock i assume?) but don't recieve audio...
anyone have any insights into this?
Posted:
Thu Jun 08, 2006 12:46 amby PeterR
I thought the 002 had seperate outs on spdif. My mbox mirrors the main outs but I was under the impression 002 had them available as additional outs?
Posted:
Thu Jun 08, 2006 1:14 amby Martin
so was i, this 002 is brand new and i have a feeling they have changed something because from memory the +2year old 002 i used previously you had the choice....
theres no option to seperate them from what i can tell, either way i'm not getting any out from the s/dif outputs
on a side not we just (up?)graded from a 001 and it definately sounds different, can't tell exactly how yet as we're experiementing clocking it off different sources etc
Posted:
Thu Jun 08, 2006 1:16 amby Mark Bassett
The S/PDIF outs are seperate in the sense that you can have one signal going to the main outs, and a different signal going to the S/PDIF outs.
Have you tried changing the outputs on the channels to S/PDIF L-R? Getting any audio this way?
Click Setup->I/O, click on Output and click Default.
Then try setting all the channel outs to S/PDIF L-R.
I'm fairly sure that the S/PDIF outs won't simply mirror the main outs.
Posted:
Thu Jun 08, 2006 11:08 amby Martin
have tried most of the above, can't seem to seperate them as yet... even in i/o setup
will have another crack at it today and post what works
Posted:
Thu Jun 08, 2006 9:11 pmby davemc
Are you using core audio with logic etc or pro tools.
If core audio there is a mirror switch button.
Otherwise in Pro Tools they are seperate in the IO.
1-2 analog and 17-18 SPDIF.
If you want to use them both on a track then something like cntrl/alt or something like that you will get a "+" sign and have dual outs.
I redid my I-O when I got the Mytek and made Spdif out LR and left the rest 1,2,3,4,5,6 etc out to the Trident. Good luck. Your also going to have to change the audiotion paths if you want this teh main out.