Turtlerock Forum

Ive got a 206 that I'm about to chop, I found some legs off an old table that are very similar to the 200 legs so im going to mount them but I have to make the mounts and add a thread to the top off the legs. I want to mount them in the exact same spot and make the plates the same size as the originals so if I ever get any I can swap them over easily.

If anyone with a 200 is able to give me the measurements of the mounting plates, there distances from the edges, how long the legs are, what thread is used and if the legs are on any angles or just straight down that would be really appreciated. Also any pics of the underside of your wurly would be a great help

Cheers

Hey Oliver,

Posted some photos of 200a and info here :
http://www.mysonictemple.net/ep200a/

Some shots have tape measure to give you an idea of the measurements.

Legs are angled - but is not mounted on legs and cant realy measure exact angles.Hove tried to show close ups of the mounting to give as best idea as I can.

Let me know if there is anything else you need to see.

Cheers
Michael

cheers mate, your a legend, thats exactly what I need