I have a space echo in need of new/reconditioned heads. (30 years of endless tape, I'm surprised they are still even there!)
Has anyone been down this raod?
I can't find any info so I'm guessing that no one sells them.
How viable is head lathing/reconditioning?
Same as an old 1/4" I guess but I've never been there either.
Advice?
Cheers.
- It is currently Mon Jul 27, 2026 2:40 pm • All times are UTC + 10 hours [ DST ]
Space Echo replacement heads...
Moderators: rick, Mark Bassett
7 posts
• Page 1 of 1
perefectly do- able if there is enough "meat" in the heads and your gentle enough
i am find out the hard way that i am not gentle enough to lap heads !
try rens guitar shop in the city ( global vintage i think) i am sure they told me the other day they had a bunch of "broken" space echoes out the back ,so they may have a plan or a contact to fix them or may sell you one with a problem other then the heads
i am sure there is a tech on this board that would lap them if the heads are worth it - anybody want to put thier hand up
i am find out the hard way that i am not gentle enough to lap heads !
try rens guitar shop in the city ( global vintage i think) i am sure they told me the other day they had a bunch of "broken" space echoes out the back ,so they may have a plan or a contact to fix them or may sell you one with a problem other then the heads
i am sure there is a tech on this board that would lap them if the heads are worth it - anybody want to put thier hand up
-

rick - Moderator

- Posts: 3486
- Joined: Fri May 06, 2005 8:02 pm
- Location: Sydney
M y guess is that they were a mass produced tape head and if you look on the head the manufacturers name would point you in the right direction to raid some heads from a simmilar era tape recorder of the same name.
Just a long shot but worth a try
Just a long shot but worth a try
-

Chris H - Forum Veteran

- Posts: 2321
- Joined: Mon May 09, 2005 11:20 am
- Location: Off The Planet
I'd prefer not to buy another one because even "as is" space echo's are worth too much. (Although the cost of reconditioing 5 heads is possibly as much? I don't know)
Your idea Chris is rather cunning, definitely appealing to my tight-fisted hard-road-to-save-a-dollar mentality.
I'll look into it.
thanks
Your idea Chris is rather cunning, definitely appealing to my tight-fisted hard-road-to-save-a-dollar mentality.
I'll look into it.
thanks
- Virtual Aaron
- Registered User

- Posts: 34
- Joined: Tue Sep 27, 2005 2:31 pm
- Location: Melbourne
don't do the head re lap yourself unless you are positive you can do it
there is less margin for error the smaller the head so 1/4 " is not easy
maybe practice on some worthless tape machines first
if in doubt and you are in melb
serge at audio does good relaps
or simon tregear is constantly repairing these space echos so hes a good bet too
there is less margin for error the smaller the head so 1/4 " is not easy
maybe practice on some worthless tape machines first
if in doubt and you are in melb
serge at audio does good relaps
or simon tregear is constantly repairing these space echos so hes a good bet too
- mark rachelle
- Registered User

- Posts: 185
- Joined: Sun May 08, 2005 3:27 pm
[quote="rick"]perefectly do- able if there is enough "meat" in the heads and your gentle enough
i found d out the hard way that i am not gentle enough to lap heads !
try rens guitar shop in the city ( global vintage i think) i am sure they told me the other day they had a bunch of "broken" space echoes out the back ,so they may have a plan or a contact to fix them or may sell you one with a problem other then the heads
i am sure there is a tech on this board that would lap them if the heads are worth it - anybody want to put thier hand up[/quote]
i found d out the hard way that i am not gentle enough to lap heads !
try rens guitar shop in the city ( global vintage i think) i am sure they told me the other day they had a bunch of "broken" space echoes out the back ,so they may have a plan or a contact to fix them or may sell you one with a problem other then the heads
i am sure there is a tech on this board that would lap them if the heads are worth it - anybody want to put thier hand up[/quote]
-

rick - Moderator

- Posts: 3486
- Joined: Fri May 06, 2005 8:02 pm
- Location: Sydney
I just had an amp done recently by Simon Tregear, and he's got a few other things of mine on the shelf. He had ten space echo's there as well in the ever growing queue. He is really busy however and I don't think I could burden him any more with another Space Echo.
I wouldn't ever contemplate lapping them myself.
So who is this Serge chap?
I wouldn't ever contemplate lapping them myself.
So who is this Serge chap?
- Virtual Aaron
- Registered User

- Posts: 34
- Joined: Tue Sep 27, 2005 2:31 pm
- Location: Melbourne
7 posts
• Page 1 of 1
Return to The Turtlerock Forum
Who is online
Users browsing this forum: No registered users and 21 guests