Page 1 of 1

Phantom power on a radio transmitter

PostPosted: Wed Dec 05, 2012 9:48 pm
by The Tasmanian
Can anyone suggest what brand of radio transmitter has 48 v phantom power onboard?

Re: Phantom power on a radio transmitter

PostPosted: Thu Dec 06, 2012 7:23 am
by SYOS
Do you need a plug on transmitter or beltpack??

I've used the Sennheiser plug on transmitter and it worked well.

http://www.sennheiserusa.com/profession ... ies_504051

They used to sell for around $800 for the transmitter alone, no receiver.

Re: Phantom power on a radio transmitter

PostPosted: Thu Dec 06, 2012 8:17 am
by The Tasmanian
Hi Dan - I need it for a hydrophone:
viewtopic.php?f=11&p=59145#p59145

So the +48V and transmitter will be 30-40 meters away from the mic.
(Using radio transmitters because there is a crane involved)

may be best to get a small plug in 48v phantom supply, and use standard transmitters...

Re: Phantom power on a radio transmitter

PostPosted: Thu Dec 06, 2012 8:31 am
by The Tasmanian

Re: Phantom power on a radio transmitter

PostPosted: Thu Dec 06, 2012 9:18 am
by SYOS
Yeah, a local phantom PSU into a standard beltpack will be much cheaper!!

Re: Phantom power on a radio transmitter

PostPosted: Thu Dec 06, 2012 10:45 am
by The Tasmanian
Sorted - we are going to run the Hydrophone off 9V battery's
Easy