Turtlerock Forum

I am tracking a few tunes at 96Khz, I normally track at 44.1

I usually run a be!@#$%^& ADA8000 from ADAT to drive my VU meters.

It only runs up to 48Khz.

I have spdif output on my RME UCX.

anyone have to recommend or have lying around they want to part with a spdif to analog converter?

cheers

Wiz

Wiz, have you tried feeding it 96K and seeing if it will run via smux? So if it's in slave mode and you sync it to the lightpipe input and feed it 96k it may work but it will split each channel into 2, so your outputs will be something like left - output1, right output 3, or possibly left - output 2 right output 4.
Might not but I've heard rumours of it working.

Chinagraf wrote:Wiz, have you tried feeding it 96K and seeing if it will run via smux? So if it's in slave mode and you sync it to the lightpipe input and feed it 96k it may work but it will split each channel into 2, so your outputs will be something like left - output1, right output 3, or possibly left - output 2 right output 4.
Might not but I've heard rumours of it working.

YOU SIR ARE A GENIUS!!!




I hadn't even considered that it might have worked...and it does...

Thanks heaps, saved me some money, a simple click click of the patch bay and I have VUs again

thanks again

cheers

Wiz

Good one. Glad it worked.
Cheers.