Page 1 of 1
TEAC 3340s Help!
Posted:
Mon Jan 05, 2015 1:38 pmby Zarven Kara
Need some help with a reel to reel machine, TEAC 3340s. Im trying to calibrate the input levels but can't work our this two stage pot, the inner pot has a screw for the mic level thats fine but the outer pot has none, does anyone know how to change the calibration on this?
cheers
Zarven
Re: TEAC 3340s Help!
Posted:
Tue Jan 06, 2015 6:26 amby otto ruiter
Re: TEAC 3340s Help!
Posted:
Tue Jan 06, 2015 8:44 amby Zarven Kara
Yes I read through it but still can't work it out, there are 4 channels but only two sets of calibration for left and right. I am probably missing something obvious......
Re: TEAC 3340s Help!
Posted:
Tue Jan 06, 2015 8:55 amby otto ruiter
Hi Zarven,
If you have the bottom cover off, note that there are hinges on the rear/bottom section. Undo the screws on the back at the base and that section folds out giving access to the other channel cards.
Re: TEAC 3340s Help!
Posted:
Tue Jan 06, 2015 2:59 pmby Zarven Kara
Hey thanks Otto, I found it, all calibrated and working, an awesome machine!!! Just tracked some vocals and compared it to digital, analog any day!!! Im after some 10inch hub adaptors for it, do you or anyone know where to get them from?
Re: TEAC 3340s Help!
Posted:
Tue Jan 06, 2015 8:31 pmby stosostu
Re: TEAC 3340s Help!
Posted:
Wed Jan 07, 2015 1:06 pmby Analogaudioguy
I believe I've got some 1/4" hold downs . Give me a shout if you still need a pair.