Advice requested...
What do you think is important in the modern studio to interconnect between recording areas and control room areas? xlr i/o obviously but ethernet, optical, usb, coax??? Considering the ubiquitousness of wireless.
My initial thought is "D" footprint connectors, for all sockets and leave a few open for expansion. Pick the amount of xlr i/o needed and then two ethernet and done. Thoughts?
- It is currently Mon Jul 27, 2026 10:22 am • All times are UTC + 10 hours [ DST ]
studio interconnections and panels
Moderators: rick, Mark Bassett
10 posts
• Page 1 of 1
studio interconnections and panels
Myles Mumford
Producer/Composer/Engineer/Sound Artist
Making records in sunny Melbourne
www.mylesmumford.com
Producer/Composer/Engineer/Sound Artist
Making records in sunny Melbourne
www.mylesmumford.com
-

mylesgm - Valued Contributor

- Posts: 1964
- Joined: Mon Feb 09, 2009 6:48 pm
Re: studio interconnections and panels
Run plenty of ethernet. It's nice and cheap and you can convert to all kinds of things with boxes at each end.
Also maybe HDMI if you imagine ever doing ADR type work or wanting to set up a screen in the recording space.
Proper coaxial guitar cable with TS at each is good for tie lines. Speaker cable terminated on TS for running heads in control room/cabinet in live space.
Also maybe HDMI if you imagine ever doing ADR type work or wanting to set up a screen in the recording space.
Proper coaxial guitar cable with TS at each is good for tie lines. Speaker cable terminated on TS for running heads in control room/cabinet in live space.
Nick Franklin
Record Producer: http://www.nickfranklin.net
Custom Built Audio Electronics: http://www.nfaudio.com
Record Producer: http://www.nickfranklin.net
Custom Built Audio Electronics: http://www.nfaudio.com
-

waitup - Frequent Contributor

- Posts: 773
- Joined: Fri Jul 31, 2009 3:13 pm
- Location: Sydney, NSW
Re: studio interconnections and panels
Neutrik combo Speakon/TS jacks are handy for speaker interconnections. It makes them hard to confuse with guitar lines!
- Sammas
Re: studio interconnections and panels
In a modern studio Ethernet everywhere.
Jason Blackwell
jasonmblackwell@gmail.com
jasonmblackwell@gmail.com
- jasound
- Registered User

- Posts: 181
- Joined: Tue Nov 20, 2007 2:32 pm
- Location: SYDNEY AUSTRALIA
Re: studio interconnections and panels
Definitely a couple of speaker tie-lines for running heads in control rooms and cabs in live rooms/ booths. Use speakon and and have some adaptoing cables handy.
Ben Milne
- Enginearing
- Registered User

- Posts: 50
- Joined: Fri Feb 17, 2012 1:56 pm
- Location: Melbourne, Victoria
Re: studio interconnections and panels
Thanks for the suggestions guys, it's basically what I had in mind. In regards to the ethernet connectors what should I be using? I'm a bit confused with all the different neutrik ones cat5, cat5e, cat6 etc. Will want to do a hardline to the network and possibly use a hearback headphone system which uses ethernet cable. Tips?
Myles Mumford
Producer/Composer/Engineer/Sound Artist
Making records in sunny Melbourne
www.mylesmumford.com
Producer/Composer/Engineer/Sound Artist
Making records in sunny Melbourne
www.mylesmumford.com
-

mylesgm - Valued Contributor

- Posts: 1964
- Joined: Mon Feb 09, 2009 6:48 pm
Re: studio interconnections and panels
Myles, I'd also add a midi in /out or USB to the wall plate. Capturing the event data as well as the stereo outputs of the keyboard/synths can make edits a whole lot easier! A lot of older synths/keys won't have the USB, so I'd do both midi ports, plus the USB (be handy for other things too, charging devices/computer/printer connections etc...)
Steve
Steve
Steve Lindsay
- SteveL
- Regular Contributor

- Posts: 329
- Joined: Thu Sep 13, 2007 12:59 pm
- Location: Southern Tablelands NSW
Re: studio interconnections and panels
A few hinged beer/cider- holder panels could come in handy too.
(not that I think drinking is a great studio asset.. )
(not that I think drinking is a great studio asset.. )
C h r i z t o w n o
- The Tasmanian
- Valued Contributor

- Posts: 1901
- Joined: Thu Nov 27, 2008 8:04 am
- Location: Deep in the woods....
Re: studio interconnections and panels
Myles, shielded cat6 should do the job
Andy Griffiths- onthebeatstudios & Andy's custom cables
http://www.onthebeatstudios.com
http://www.andyscustomcables.com
http://www.onthebeatstudios.com
http://www.andyscustomcables.com
- andygriffiths
- Regular Contributor

- Posts: 300
- Joined: Fri Apr 13, 2012 11:30 am
- Location: Brisbane
10 posts
• Page 1 of 1
Return to The Turtlerock Forum
Who is online
Users browsing this forum: No registered users and 30 guests