Hi everyone
I'm looking for 1 or 2 TT patchbay with Dsub connectors on the back. If you have them with EDAC connectors that's cool too, but I'd need the cabling (EDAC to XLR).
Let me know.
cheers
- It is currently Wed Jul 29, 2026 6:41 pm • All times are UTC + 10 hours [ DST ]
WTB: TT bantam patchbay with Dsub or EDAC connectors on back
Moderators: rick, Mark Bassett
12 posts
• Page 1 of 1
WTB: TT bantam patchbay with Dsub or EDAC connectors on back
Ben Moore
Harvest Recordings
Website: http://www.harvestrecordings.com.au
Facebook: http://www.faceback.com/harvestrecordings
Harvest Recordings
Website: http://www.harvestrecordings.com.au
Facebook: http://www.faceback.com/harvestrecordings
-

Ben M - Valued Contributor

- Posts: 1920
- Joined: Fri Jul 04, 2008 11:54 am
- Location: Sydney and Kangaroo Valley, NSW
Re: WTB: TT bantam patchbay with Dsub or EDAC connectors on
Redco - in the US - so much cheaper than all the others.
Get your patchleads there to
Get your patchleads there to
C h r i z t o w n o
- The Tasmanian
- Valued Contributor

- Posts: 1901
- Joined: Thu Nov 27, 2008 8:04 am
- Location: Deep in the woods....
Re: WTB: TT bantam patchbay with Dsub or EDAC connectors on
The Tasmanian wrote:Redco - in the US - so much cheaper than all the others.
Get your patchleads there to
Thanks Chris.
I've been down that road briefly... at the moment I'm just seeing if there's anything around that's secondhand and local.
My home studio space is getting more and more serious. I want to transfer all my mixing to home so I can be here more. Mixed under solar.

Ben Moore
Harvest Recordings
Website: http://www.harvestrecordings.com.au
Facebook: http://www.faceback.com/harvestrecordings
Harvest Recordings
Website: http://www.harvestrecordings.com.au
Facebook: http://www.faceback.com/harvestrecordings
-

Ben M - Valued Contributor

- Posts: 1920
- Joined: Fri Jul 04, 2008 11:54 am
- Location: Sydney and Kangaroo Valley, NSW
Re: WTB: TT bantam patchbay with Dsub or EDAC connectors on
That's great news - working at home is the bomb !
I hope to start building the solar "shedio" very soon - I'm nearly there....
Give me an idea on the solar setup? - can you run lots of outboard, mac,monitor, tools ,ADDA, mic pre's, valve stuff, guitar amps, Active monitor's etc all day (say 12-14 hrs?) from solar charging your battery bank ?
And powering the rest of the house - or seperate 2 systems ?
Looks like Solar Systems are gonna be getting cheaper from tomorrow onwards - this can only be a very good thing.
I hope to start building the solar "shedio" very soon - I'm nearly there....
Give me an idea on the solar setup? - can you run lots of outboard, mac,monitor, tools ,ADDA, mic pre's, valve stuff, guitar amps, Active monitor's etc all day (say 12-14 hrs?) from solar charging your battery bank ?
And powering the rest of the house - or seperate 2 systems ?
Looks like Solar Systems are gonna be getting cheaper from tomorrow onwards - this can only be a very good thing.
C h r i z t o w n o
- The Tasmanian
- Valued Contributor

- Posts: 1901
- Joined: Thu Nov 27, 2008 8:04 am
- Location: Deep in the woods....
Re: WTB: TT bantam patchbay with Dsub or EDAC connectors on
didnt you two dance the solar dance last year ?
Rick O'Neil
I think we went to different schools together
turtlerockmastering.com
we listen
I think we went to different schools together
turtlerockmastering.com
we listen
-

rick - Moderator

- Posts: 3486
- Joined: Fri May 06, 2005 8:02 pm
- Location: Sydney
Re: WTB: TT bantam patchbay with Dsub or EDAC connectors on
I've been planning well in advance - lots of research into solar passive designs - Including how to build my own heaters! ...and mainly waiting for a certain thing to "happen" .... its taken a looonngg time - ahh a cupla day's.
-
-
C h r i z t o w n o
- The Tasmanian
- Valued Contributor

- Posts: 1901
- Joined: Thu Nov 27, 2008 8:04 am
- Location: Deep in the woods....
Re: WTB: TT bantam patchbay with Dsub or EDAC connectors on
The Tasmanian wrote:That's great news - working at home is the bomb !
I hope to start building the solar "shedio" very soon - I'm nearly there....
Give me an idea on the solar setup? - can you run lots of outboard, mac,monitor, tools ,ADDA, mic pre's, valve stuff, guitar amps, Active monitor's etc all day (say 12-14 hrs?) from solar charging your battery bank ?
And powering the rest of the house - or seperate 2 systems ?
Looks like Solar Systems are gonna be getting cheaper from tomorrow onwards - this can only be a very good thing.
Chris…I think we should start our “solar…why the bloody hell not?” thread in the main forum.
This is something that a few people might have in mind considering the future prospects with solar design and increasing power prices.
We work in an industry that requires power and lots of it…. so let’s open up the topic…
To answer the question;
It’s one main solar system. All panels > batteries > regulator > inverter. 2kw panels and 24v battery bank. Clean uninterrupted 240v power. It’s been running for 6 years without a glitch.
This is what I’m expecting to run off the power in addition to normal house going ons;
Mac tower, interface, monitor, active monitors, a few valve comps, bunch of other stereo comps, couple of eq’s and couple of verb units… I’m not tracking at home (yet) so my mic pre’s won’t be fired up much here (maybe just for reamp or occasional OD). I am planning an extension of the studio building to have a live room with booth and bathroom while keeping it as extra guest accom. I’m hoping to do recordings here in the not to distant future.
In relation to the extra power usage;
I’m planning to turn things off when I’m not using them. I’ve become really good at this through living under solar. I’ll probably find myself recording some of the processing I do so things aren’t always on. Also when I shut things down at night, everything will be turned off at the wall – including those power boards with lights on them. Those little power indicator lights are enough to keep your inverter on. Good little note for later.
Also planning work during daylight/early evening hours so I’m working in tandem with the incoming power. My experience is that stand alone solar systems like being used, and in a routine fashion. That is, consistent positive usage with the incoming rays. Just keep the charge up above 24v.
Because my little studio is 50m away from the house I’ll be using more lights (lamps) than normal plus the extra equipment… so I’m adding a couple of extra panels to the system to give it an extra boost. These extra panels will take the system to around 2.4kw. I’m hoping this will help balance out my additional power usage.
With those fierce direct winds down there in tassy I would also be considering wind power as an extra source, so you can continue to charge at night when it’s blowing a gale. Good wind power needs open space with direct wind. Where we are the wind swirls around a bit too much for strong direct wind. One property near us has a small turbine… i should go and ask them how it’s going.
I know you’ve got a lot of toys to plug in Chris….. and a shedio man cave to build… but what size system are you considering to install and will the tape machine be on the list to power?
Ben Moore
Harvest Recordings
Website: http://www.harvestrecordings.com.au
Facebook: http://www.faceback.com/harvestrecordings
Harvest Recordings
Website: http://www.harvestrecordings.com.au
Facebook: http://www.faceback.com/harvestrecordings
-

Ben M - Valued Contributor

- Posts: 1920
- Joined: Fri Jul 04, 2008 11:54 am
- Location: Sydney and Kangaroo Valley, NSW
Re: WTB: TT bantam patchbay with Dsub or EDAC connectors on
Well - As I've had a long time to consider this - and nearly bought that killer API....in my dreams....
At a certain point I thought it would work best for solar to keep it all small and mobile / focus on lots of things with smaller power supply's - Ive got a 1/2 inch Otari 8 track for analog tape. I may still buy a 1 inch 8 track yet........
I made my 10 Channel console out of electrodyne modules - plus lots of vintage and modern outboard/modules.
But they will be off - like you, I don't need everything on all the time and imagine that being aware of turning things on when we need to would be a simple task.
Do you run a generator as a emergency backup - ?
Thanks for sharing this stuff
Yeah - we should re-ignite a Solar/why not? post soon - or at least document and show how easy it is to DIY for forum members who want to consider generating their own power.
I'm all talk just yet - just about to put it into practice.
It would be a nice feeling going to work knowing the only running costs would be the internet and the phone.
And more importantly one more house on the planet not drawing on the electricity grid
At a certain point I thought it would work best for solar to keep it all small and mobile / focus on lots of things with smaller power supply's - Ive got a 1/2 inch Otari 8 track for analog tape. I may still buy a 1 inch 8 track yet........
I made my 10 Channel console out of electrodyne modules - plus lots of vintage and modern outboard/modules.
But they will be off - like you, I don't need everything on all the time and imagine that being aware of turning things on when we need to would be a simple task.
Do you run a generator as a emergency backup - ?
Thanks for sharing this stuff
Yeah - we should re-ignite a Solar/why not? post soon - or at least document and show how easy it is to DIY for forum members who want to consider generating their own power.
I'm all talk just yet - just about to put it into practice.
It would be a nice feeling going to work knowing the only running costs would be the internet and the phone.
And more importantly one more house on the planet not drawing on the electricity grid
C h r i z t o w n o
- The Tasmanian
- Valued Contributor

- Posts: 1901
- Joined: Thu Nov 27, 2008 8:04 am
- Location: Deep in the woods....
Re: WTB: TT bantam patchbay with Dsub or EDAC connectors on
Yeah the API was going to be not very solar friendly Chris.
I do have an 8kva honda generator for back up emergency. Takes about $10 fuel to charge back up to floating point. Only really need this after days of no sun. Few times a year.
I was concerned about the tape machine because of the transport motors driving back and forth all day. But really I still can't see a problem if you use it for a while and then dump into tools. I mean I have pumps and all sorts of stuff like fridge...etc that I run off my system. Those motors should be cool.
With all this crappy wind around lately I've had a quiet little giggle to myself with all the power outages around my area. Coming home to a solar powered home when everyone else around is in darkness is like winning the lotto.
I do have an 8kva honda generator for back up emergency. Takes about $10 fuel to charge back up to floating point. Only really need this after days of no sun. Few times a year.
I was concerned about the tape machine because of the transport motors driving back and forth all day. But really I still can't see a problem if you use it for a while and then dump into tools. I mean I have pumps and all sorts of stuff like fridge...etc that I run off my system. Those motors should be cool.
With all this crappy wind around lately I've had a quiet little giggle to myself with all the power outages around my area. Coming home to a solar powered home when everyone else around is in darkness is like winning the lotto.
Ben Moore
Harvest Recordings
Website: http://www.harvestrecordings.com.au
Facebook: http://www.faceback.com/harvestrecordings
Harvest Recordings
Website: http://www.harvestrecordings.com.au
Facebook: http://www.faceback.com/harvestrecordings
-

Ben M - Valued Contributor

- Posts: 1920
- Joined: Fri Jul 04, 2008 11:54 am
- Location: Sydney and Kangaroo Valley, NSW
Re: WTB: TT bantam patchbay with Dsub or EDAC connectors on
Ben is your HW on the solar too?
C h r i z t o w n o
- The Tasmanian
- Valued Contributor

- Posts: 1901
- Joined: Thu Nov 27, 2008 8:04 am
- Location: Deep in the woods....
Re: WTB: TT bantam patchbay with Dsub or EDAC connectors on
Its snowing here - not a good day for solar!
C h r i z t o w n o
- The Tasmanian
- Valued Contributor

- Posts: 1901
- Joined: Thu Nov 27, 2008 8:04 am
- Location: Deep in the woods....
Re: WTB: TT bantam patchbay with Dsub or EDAC connectors on
Julia has spoken.
100 billion towards renewables.
I expect a lot of confidence in the boom/bust solar industry tomorrow Chris. Good time for a quote.
Snowing? you lucky guy. Get the mulled wine going and throw a few snow balls for me.
100 billion towards renewables.
I expect a lot of confidence in the boom/bust solar industry tomorrow Chris. Good time for a quote.
The Tasmanian wrote:Its snowing here - not a good day for solar!
Snowing? you lucky guy. Get the mulled wine going and throw a few snow balls for me.

Ben Moore
Harvest Recordings
Website: http://www.harvestrecordings.com.au
Facebook: http://www.faceback.com/harvestrecordings
Harvest Recordings
Website: http://www.harvestrecordings.com.au
Facebook: http://www.faceback.com/harvestrecordings
-

Ben M - Valued Contributor

- Posts: 1920
- Joined: Fri Jul 04, 2008 11:54 am
- Location: Sydney and Kangaroo Valley, NSW
12 posts
• Page 1 of 1
Return to For Sale / For Hire / Gear Wanted
Who is online
Users browsing this forum: No registered users and 12 guests