White Instruments 4001 Inductor based Equalizer PAIR - SOLD

[filjorgez]

SOLD

one pair of
White Instruments 4001
Inductor based Eq
'Active LC negative feedback. Precision inductors in magnetically shielded enclosures'
Transformer balanced input
-
smooth tone, low distortion, no phase issues
great drum equalizer
-
good working order
-
ebay
http://www.ebay.com.au/itm/160728813302 ... 500wt_1204

$430 buy it now for Trockers

White_4001 -1.jpg

White_4001 -2.jpg

vintage electronics, sold as is
no local pickup, but I can deliver personally around Melbourne

[dave01.cooper]

Hey Phil,

are the eq knobs sweepable or notched? What's the history on the unit and any info on White Instruments? Never heard of them or any of their gear...

Cheers

[Hookemeister]

Hi Dave

Just thought I'd answer one of the questions for you.

The White 4001 was designed as a high quality Control Room/Sound Reinforcement equalizer some time back in the 70's. The studios loved them, the PA guys preferred the graphic (fader) type eq's

It consists of 27 peak and dip equalizers on ISO third octave centers... 40, 50, 63, 80,100, 125Hz all the way up to 16Khz. Range was + or -10db. There's also a 12db/octave variable high pass filter which sweeps from 20Hz up to 160Hz.

I think the 4001 was transformer balanced input and single ended (unbalanced) output.

It was quite common to see them in the monitoring chain of large studios to try and flatten out the speaker response.

One thing to keep in mind, if you're thinking of using it as an EQ in your rack of effects, is that the EQ bypass switch is on the back of the unit. I'm not sure why they did that, more than likely because there was no room left on the front panel.

Somewhere in the archives I think I've got a manual for it.

If I remember correctly the IC's are all on sockets so it would be easy to upgrade them.

Not sure if you can still get the EQ pots. Rob might be able to chime in on that one.

LRC circuits are all hermetically sealed.

Impressive looking beasts with 28 knobs within a 2RU space.

If you're looking for an EQ to insert in the monitoring chain then this is the ticket.

Hope this helps

[dave01.cooper]

Hey Greg,

Thanks for the speedy reply. That's exactly where I was thinking of putting it - sweeten up the monitoring chain for better translation. That or sending some stereo stems through to it for post eq'ing...

Hmmmmmmmmmmm let me ponder

[filjorgez]

thank you Greg, you're a gentleman.

Hi Dave,
Greg has covered it well.
and here is the manual for the rest.
http://www.whiteinstruments.com/4000-archive.pdf

This pair came from La Creme Production Services
http://www.lecreme.com.au/collections/p ... graphic-eq

These units do have an EQ 'in/out' on the front panel, as the low cut pot is also a switch.
On the back is a 'bypass' switch, as well as a level pot for the second output.
The freq pots are sweepable, but are very smooth, and the markers are one dB each, so they are very easy to reset to even a half dB accuracy.

White_4001_EQswitch-1.jpg

White EQ_rear_-1.jpg

White EQ_rear_-2.jpg

thanks again for your time Greg,
... I love this forum!

[dave01.cooper]

Cheers for the clear up Phil, sounds like a pretty powerful & transparent unit. Need to review funds (or lack thereof) & will get back to you as soon as I can.

... I love this forum!

Sure do.

[Manning]

... I love this forum!

Just FYI - we are also very knowledgeable in gourmet cooking and the proper usage of tin-foil hats.

[filjorgez]

... I love this forum!

Just FYI - we are also very knowledgeable in gourmet cooking and the proper usage of tin-foil hats.

you mean there is an improper use?