Hi all, doing a bit of a tidy up. All available for pickup Kingsville or South Melbourne, or happy to post at cost. Can provide photos of anything, just let me know what you'd like to see.
RCA Monitor amp units $150
Two older (1960s/70s?) Germanium monitor amps, 1x BA-34B and 1x BA-34C. I bought these ages ago (from memory one from Turtlerock forum, one from ebay) during the GroupDIY craze of converting everything old into mic preamps. That project was a little long and complicated, and I did have them functional at both as mic preamps and monitor amps, but I don’t believe they are really suitable for use as mic preamps.
They have been recapped (except for big multi stage caps), one power tx is 240v, the other is 110v, but the 240v has plenty of current to power both which is what I did.
I paid more than this for them, but I’m pricing them on what I think the transformers are worth. If no one wants them I’ll just keep the transformers and bin the rest.
Can provide spare connectors for them if someone would like to make tails.
Yamaha NS10s $600
Pair of NS10M monitors in good condition. Fused for protection, no issues but not getting used by me since upgrading my monitoring.
CM Motormix $110
8 channel Control surface
Getting a bit older but works great. Connections via MIDI.
Motu interface 8pre $400
Firewire based interface with 8 mic preamps.
Nice little unit but surplus to my needs. Was replaced on warranty a few years ago and has hardly been used since then, so in very good condition.
Can supply with firewire cable and firewire-Thunderbolt adapter.
AMT S25B Double Bass mic system $550
I'm getting rid of my double bass mic package as I don't really play the bass on gigs anymore unfortunately.
It's the top of the line AMT stuff, and has had a relatively easy life, only doing a handful of gigs about 7 or so years ago and nothing since then! A few little scuff marks on the preamp and mic mountings, but otherwise in good condition and functioning perfectly.
https://appliedmicrophoneshop.com/…/side-mounting-bass-syst…
Specs for the mic can be found at the link, but please note that this package has a lot more stuff including:
1x Tailpiece mic
1x Sidemount mic as shown on AMT site
1x 'Super preamp'. AMT no longer sells this, it's an improved version of their studio preamp and includes a volume control
2x cables
1x carry case
Some spare parts for the sidemount mic fixture
As it comes with two mics, you could even buy a second preamp and have two complete systems.
AMT S3G Guitar microphone $200
AMT S3G guitar microphone in near perfect condition. Only used twice in a studio environment, never live.
These are cool and different mics that sit in the soundhole of a guitar and face back towards the strings- so great for when you need lots of isolation but don't want to use a pickup.
One was used by Pat Metheny to record his solo record One Quiet Night if you want an idea of what they sound like.
Comes with carry case and preamp/power supply. Specs at this link:
https://www.musiciansfriend.com/pro-aud ... p40-preamp
Second hand (exABC) Switchcraft B-Gauge patchbay with solder connectors on rear. I've never used it but looks to be in good condition.
$15
- It is currently Mon Jul 27, 2026 12:27 am • All times are UTC + 10 hours [ DST ]
FS: Clear out- NS10s, AMT mics, parts, interface
Moderators: rick, Mark Bassett
2 posts
• Page 1 of 1
FS: Clear out- NS10s, AMT mics, parts, interface
Alistair McLean
- Alistair
- Frequent Contributor

- Posts: 634
- Joined: Fri Jul 16, 2010 11:35 am
- Location: Melbourne
Re: FS: Clear out- NS10s, AMT mics, parts, interface
PM sent
Gian Parodi
It's the first watt that counts
It's the first watt that counts
- Gian
- Frequent Contributor

- Posts: 516
- Joined: Tue Nov 18, 2008 9:38 pm
- Location: Sydney, Australia
2 posts
• Page 1 of 1
Return to For Sale / For Hire / Gear Wanted
Who is online
Users browsing this forum: No registered users and 12 guests