Myles needs a new bike gear sale!
Posted: Tue Oct 25, 2016 3:13 pmMy motorcycle was trashed by some jerks over the weekend and so I'm finally pulling stuff out of cupboards to sell so here we go...
Various modules for the 500 series lunch box. All are working perfectly.
from left to right:
CAPI VP25 with blank faceplate. Cinemag transformers and a Scott Lieber Blue Dot DOA. This sounds as good if not better than any api 312 style preamp I've ever heard and I'm selling this one because I have 7 variations of these. I usually get the faceplates hand engraved but didn't get around to doing it on this one. Fully working, well built kit $300
500 series copy of the Studer 169 eq. 2 fixed bands and a sweepable mid band. This is a very smooth and sweet sounding eq with a neutrik output tx. Works perfectly but I'm selling without DOA because I'm using them in a different project. Fully working and well built kit. $200 SOLD
2x Aphex Project 500 channel strips. These pack a lot of possibilities in a small package, 2 band sweepable eq, real opto compressor pre or post eq, high pass filter, DI input and of course a clean mic preamp. These are no longer available. $350 each or $600 for the pair.
Serpent Audio SB4001 SSL style stereo compressor. This is a ripper buss comp with loads of options packed into a tiny footprint. Full SSL signal path with 4 matched and paralleled VCAs per channel, sidechain filter and external sidechain input, additional ratios, additional attack and release options including variable release and auto release profiles, grind mode, and blend for wet/dry mix. This is exactly like the production units but this was built from a limited release of kits to the DIY community. It works perfectly and sounds great. $1000 SOLD
DBX 560a, a dbx 160a in a 500 series footprint. Yep, you know what it is and you know what it sounds like. Stick it in your rack. This one is brand new and I've never installed it. I bought two and ran out of room in my two racks. $300
Postage is extra and pickup is preferred. I will accept paypal if you pay the fees but prefer bank deposit. If you want to see/hear them in action I can organise that for serious buyers at my studio in collingwood.
You can email me at mylesgmumford@gmail.com
Various modules for the 500 series lunch box. All are working perfectly.
from left to right:
CAPI VP25 with blank faceplate. Cinemag transformers and a Scott Lieber Blue Dot DOA. This sounds as good if not better than any api 312 style preamp I've ever heard and I'm selling this one because I have 7 variations of these. I usually get the faceplates hand engraved but didn't get around to doing it on this one. Fully working, well built kit $300
500 series copy of the Studer 169 eq. 2 fixed bands and a sweepable mid band. This is a very smooth and sweet sounding eq with a neutrik output tx. Works perfectly but I'm selling without DOA because I'm using them in a different project. Fully working and well built kit. $200 SOLD
2x Aphex Project 500 channel strips. These pack a lot of possibilities in a small package, 2 band sweepable eq, real opto compressor pre or post eq, high pass filter, DI input and of course a clean mic preamp. These are no longer available. $350 each or $600 for the pair.
Serpent Audio SB4001 SSL style stereo compressor. This is a ripper buss comp with loads of options packed into a tiny footprint. Full SSL signal path with 4 matched and paralleled VCAs per channel, sidechain filter and external sidechain input, additional ratios, additional attack and release options including variable release and auto release profiles, grind mode, and blend for wet/dry mix. This is exactly like the production units but this was built from a limited release of kits to the DIY community. It works perfectly and sounds great. $1000 SOLD
DBX 560a, a dbx 160a in a 500 series footprint. Yep, you know what it is and you know what it sounds like. Stick it in your rack. This one is brand new and I've never installed it. I bought two and ran out of room in my two racks. $300
Postage is extra and pickup is preferred. I will accept paypal if you pay the fees but prefer bank deposit. If you want to see/hear them in action I can organise that for serious buyers at my studio in collingwood.
You can email me at mylesgmumford@gmail.com