FS: MCI JH110C 1" 8 track (also with 1/4" 2 track heads)
Posted: Wed Mar 01, 2017 4:08 pmMCI JH110C 1” 8 track Tape Machine
In Northcote, VIC
I've got it listed for $6k on facebook groups but will consider reasonable offers
Also comes with ¼” 2 track heads and rollers
Comes with autolocator III remote (cable is about 10m or so)
Comes with about 10 tapes in boxes and a couple of empty take up reels
Fully operational condition.
Was just serviced by Des Amos.
Selling for financial reasons.
It’s a great machine.
Inspection welcome in Northcote
I can ship interstate / overseas. I have a cabinet-making workshop so I can build a serious crate for it.
---Some further info---
At MARA machines in the states, it is their most requested tape deck. See what they have to say about this model.
http://maramachines.com/Machines/Pages/ ... Track.html
the format is so popular they have begun to convert JH24s to 1” 8 track too
http://vintageking.com/mara-machines-mc ... ight-track
All manner of heads can be mounted on this deck, just by undoing 2 screws and swapping the headblock. Many different formats are available new from MARA machines and from JRF Magnetics.
In Northcote, VIC
I've got it listed for $6k on facebook groups but will consider reasonable offers
Also comes with ¼” 2 track heads and rollers
Comes with autolocator III remote (cable is about 10m or so)
Comes with about 10 tapes in boxes and a couple of empty take up reels
Fully operational condition.
Was just serviced by Des Amos.
Selling for financial reasons.
It’s a great machine.
Inspection welcome in Northcote
I can ship interstate / overseas. I have a cabinet-making workshop so I can build a serious crate for it.
---Some further info---
At MARA machines in the states, it is their most requested tape deck. See what they have to say about this model.
http://maramachines.com/Machines/Pages/ ... Track.html
the format is so popular they have begun to convert JH24s to 1” 8 track too
http://vintageking.com/mara-machines-mc ... ight-track
All manner of heads can be mounted on this deck, just by undoing 2 screws and swapping the headblock. Many different formats are available new from MARA machines and from JRF Magnetics.