Page 1 of 1
NEED TO BUY:hub adapter Otari MX5050 or rubber bands for hub
Posted:
Thu Oct 22, 2009 3:01 amby Matt_Gio
hey guys,
anyone got a spare 1 or 2 of these lying around that they can off load to me? I know that its not an overly profitable experience for ya but I could really use one and thought I'd try here before hitting the bay etc
thanks
Matt
Posted:
Thu Oct 22, 2009 3:04 amby Matt_Gio
i've actually got 2 that seem ok but the rubber band is broken on one.. and I think a bit came off somewhere too.. is it easier to just get a whole new hub?
Posted:
Fri Oct 23, 2009 1:21 amby Matt_Gio
hey guys,
just looking at my hubs... i think I actually only need the rubber bands that go around them.
...any ideas anyone??
M
Posted:
Fri Oct 23, 2009 7:38 amby rick
ideas..?
turn your otari off and buy an ampex :)
Posted:
Fri Oct 23, 2009 12:42 pmby Matt_Gio
...thanks rick... very helpful.
Im just getting my otari up and running so can practice recording to tape. When I'm starting to get it down I'll upgrade.
Unless you know anyone selling ampex 8 track for under $1K ;)
Posted:
Fri Oct 23, 2009 1:28 pmby Kurt
If you can't get Otari replacement bands take it to a vacuum cleaner/vcr/washing machine repair shop, they have heaps of different rubber bands in all sorts of sizes. You might get lucky and it'll be dirt cheap.
Matt_Gio wrote:hey guys,
just looking at my hubs... i think I actually only need the rubber bands that go around them.
...any ideas anyone??
M
Posted:
Fri Oct 23, 2009 6:01 pmby Matt_Gio
good call! cheers!
Posted:
Sat Oct 24, 2009 7:04 pmby Adam Dempsey
Hi, these are the NAB hub adaptors, yes? If you've not had luck so far maybe try Daniel at Dex. When there, ask to see his personal tape machine museum. Maybe the Lyrec 1/4" he's had for sale in the showroom for 11+yrs is still there with the Ampex 3 track..
Posted:
Sat Oct 24, 2009 8:47 pmby 13thbeach
Adam Dempsey wrote:Hi, these are the NAB hub adaptors, yes? If you've not had luck so far maybe try Daniel at Dex. When there, ask to see his personal tape machine museum. Maybe the Lyrec 1/4" he's had for sale in the showroom for 11+yrs is still there with the Ampex 3 track..
Wow I didn't realise they ever sold anything. Once they get it, they keep it I thought.
Posted:
Sun Oct 25, 2009 11:34 amby Adam Dempsey
Well the Lyrec (not the Ampex) was one of the few machines for sale. He also serviced and sold a valve C37 (to Soundpark studios, from memory, though not aware if it's still there). Also U47 mods. The valve mic pre's (which can handle +30 line level) are actually worth a look/listen.
Posted:
Sun Oct 25, 2009 12:32 pmby Matt_Gio
thanks adam!
I dont know Dex? you got any contact details?