- It is currently Fri Jul 31, 2026 9:58 am • All times are UTC + 10 hours [ DST ]
Auditronics 110b 24 ch desk
Moderators: rick, Mark Bassett
45 posts
• Page 1 of 2 • 1, 2
Auditronics 110b 24 ch desk
Any ideas what this would b worth ,modified ,put together by Rob
Tony Peel,obssesive compulsive gear collector
- PRINCETOWN
- Registered User

- Posts: 158
- Joined: Sun May 08, 2005 6:09 pm
- Location: warrnambool victoria
Gosh, I reckon my current gear budget of a little of $1k would be about on the money, wouldn't it
..... for 1 of the channel strips, that is.
..... for 1 of the channel strips, that is.
Chris Preston
The man who gives meaning to the word "amateur"
The man who gives meaning to the word "amateur"
-

chris p - Frequent Contributor

- Posts: 882
- Joined: Tue May 10, 2005 6:15 pm
- Location: Sydney, NSW
presume we are talking the grandson of ...its worth about 4-5 k as a desk and about 8-10k as raw modules
it should be worth about 30k as a desk and nothing as modules
there is one at my place .. ( not for sale ) whats to modd ?
it should be worth about 30k as a desk and nothing as modules
there is one at my place .. ( not for sale ) whats to modd ?
Rick O'Neil
I think we went to different schools together
turtlerockmastering.com
we listen
I think we went to different schools together
turtlerockmastering.com
we listen
-

rick - Moderator

- Posts: 3486
- Joined: Fri May 06, 2005 8:02 pm
- Location: Sydney
rick wrote:presume we are talking the grandson of ...its worth about 4-5 k as a desk and about 8-10k as raw modules
it should be worth about 30k as a desk and nothing as modules
there is one at my place .. ( not for sale ) whats to modd ?
You have to add the blue leds...
Andy Evans
http://www.mud.net.au
http://www.mud.net.au
-

Chinagraf - Valued Contributor

- Posts: 1608
- Joined: Wed Jun 22, 2005 1:09 am
- Location: Melbourne
Chinagraf wrote:rick wrote:presume we are talking the grandson of ...its worth about 4-5 k as a desk and about 8-10k as raw modules
it should be worth about 30k as a desk and nothing as modules
there is one at my place .. ( not for sale ) whats to modd ?
You have to add the blue leds...
A welcome return of the blue leds's
Chris Hallam.
https://soundcloud.com/hallamsound
Whatever floats your boat.
https://soundcloud.com/hallamsound
Whatever floats your boat.
-

Chris H - Forum Veteran

- Posts: 2321
- Joined: Mon May 09, 2005 11:20 am
- Location: Off The Planet
This desk used 2 b mine ,i lost it in a diviorce settlement , now i have the opportunity to buy it back
Tony Peel,obssesive compulsive gear collector
- PRINCETOWN
- Registered User

- Posts: 158
- Joined: Sun May 08, 2005 6:09 pm
- Location: warrnambool victoria
[quote="PRINCETOWN"]This desk used 2 b mine ,i lost it in a diviorce settlement , now i have the opportunity to buy it back[/quote]
Wow, interesting. A guy on GS was talking about going through a divorce settlement at the moment and losing a fair chunk of gear from his home studio as a result. Man that's just wrooooong on so many levels.
Wow, interesting. A guy on GS was talking about going through a divorce settlement at the moment and losing a fair chunk of gear from his home studio as a result. Man that's just wrooooong on so many levels.
Andy Evans
http://www.mud.net.au
http://www.mud.net.au
-

Chinagraf - Valued Contributor

- Posts: 1608
- Joined: Wed Jun 22, 2005 1:09 am
- Location: Melbourne
business and personal need to be seperate, not that I've had any problems there. Sorry to hear though, been through divorce and wouldn't wish it on my worst enemy.
M
M
Myles Mumford
Producer/Composer/Engineer/Sound Artist
Making records in sunny Melbourne
www.mylesmumford.com
Producer/Composer/Engineer/Sound Artist
Making records in sunny Melbourne
www.mylesmumford.com
-

mylesgm - Valued Contributor

- Posts: 1964
- Joined: Mon Feb 09, 2009 6:48 pm
This has to fate or divine intervention,iam now the proud owner of my old totaly refurbished 24/8/2 Auditronics desk a steal at $2,000!
Tony Peel,obssesive compulsive gear collector
- PRINCETOWN
- Registered User

- Posts: 158
- Joined: Sun May 08, 2005 6:09 pm
- Location: warrnambool victoria
PRINCETOWN wrote:This has to fate or divine intervention,iam now the proud owner of my old totaly refurbished 24/8/2 Auditronics desk a steal at $2,000!
congrats - nice to hear of the happier outcome!
:-)
Tim Spencer
Pressurepoint Studios
Pressurepoint Studios
-

TimS - Valued Contributor

- Posts: 1734
- Joined: Tue May 15, 2007 3:11 pm
- Location: Sydney
PRINCETOWN wrote:This has to fate or divine intervention,iam now the proud owner of my old totaly refurbished 24/8/2 Auditronics desk a steal at $2,000!
Fantastic news!
Chris Hallam.
https://soundcloud.com/hallamsound
Whatever floats your boat.
https://soundcloud.com/hallamsound
Whatever floats your boat.
-

Chris H - Forum Veteran

- Posts: 2321
- Joined: Mon May 09, 2005 11:20 am
- Location: Off The Planet
ok in my foyer right now is a 32 channel 701 audtronics granson and the neotec just came in !
they are both going out so if you ever wanted a big console at a little price let the games begin
the neotec is gonna be a trm auction the audotronics will be a transaction with the owner ( not me )
ill bring my camera in tommorrow
they are both going out so if you ever wanted a big console at a little price let the games begin
the neotec is gonna be a trm auction the audotronics will be a transaction with the owner ( not me )
ill bring my camera in tommorrow
Rick O'Neil
I think we went to different schools together
turtlerockmastering.com
we listen
I think we went to different schools together
turtlerockmastering.com
we listen
-

rick - Moderator

- Posts: 3486
- Joined: Fri May 06, 2005 8:02 pm
- Location: Sydney
Ender wrote:Hmm, in that case it sounds the price couldn't be more than $1... and a pack of Iced Vovos.
I better start seeing some royalties for my quotes. haha!
Tony, great news mate. Sure was meant to be then. Let this be a lesson to anyone who tries to separate a man and his console.
Mat Robins
Coloursound Recording Studio
Coloursound Recording Studio
-

13thbeach - Frequent Contributor

- Posts: 843
- Joined: Wed May 18, 2005 12:31 pm
- Location: Sunny Altona
rick wrote:ok in my foyer right now is a 32 channel 701 audtronics granson and the neotec just came in !
they are both going out so if you ever wanted a big console at a little price let the games begin
the neotec is gonna be a trm auction the audotronics will be a transaction with the owner ( not me )
ill bring my camera in tommorrow
Cool.
Peter Houghton
http://www.tunetown.com.au
http://www.tunetown.com.au
-

tunetown - Frequent Contributor

- Posts: 929
- Joined: Fri Jan 25, 2008 9:33 am
- Location: Sydney
Re: Auditronics 110 or 501 desk
Is anyone offloading one of these consoles at the mo'?
Seems like it could be a good starting point for me.
Cheers,
Evan.
Seems like it could be a good starting point for me.
Cheers,
Evan.
Evan Lorden, Well Worn Workshops, Melbourne
- EvLoutonian
- Registered User

- Posts: 234
- Joined: Wed Jun 09, 2010 12:46 pm
- Location: Melbourne
Re: Auditronics 110b 24 ch desk
I've just realised this is a four year old thread! I believe the 32 channel Auditronics Rick is referring to wound up in my hands.
Anyway, for web-searchers reference, I've learnt a bit about Auditronics since I bought it - I've been slowing compiling a history of the company, and I've been in email contact with a couple of the old engineers.
I don't think there was ever a 700 series Grandson, only a 110 and 310. The Grandson's started in 1973, the Grandson II in 1975 and they all stopped being made around 1977.
The 500 and 700 series were released around the same time (after Auditronics had moved to a larger factory in Memphis) and they were made up until the early 80s. Meanwhile Auditronics kept making a redesigned 110 for the broadcast market, but didn't call it a Grandson. This may or may not be the 110b, I'm a little fuzzy on that point.
Auditronics would refer to the modules and other components as being either 501 or 701, but the consoles by the channel/bus total, eg 532 or 740. People seemed to use the terms interchangeably, so my console can be called both a 701 or a 740.
As a sidenote, Auditronics printed the word "Memphis" prominently on the 500 and 700 consoles, leading people to think that was the model name. It wasn't, they just liked telling people they were from Memphis.
http://www.studiolaughingduck.com/wp-co ... 205932.jpg
Anyway, for web-searchers reference, I've learnt a bit about Auditronics since I bought it - I've been slowing compiling a history of the company, and I've been in email contact with a couple of the old engineers.
I don't think there was ever a 700 series Grandson, only a 110 and 310. The Grandson's started in 1973, the Grandson II in 1975 and they all stopped being made around 1977.
The 500 and 700 series were released around the same time (after Auditronics had moved to a larger factory in Memphis) and they were made up until the early 80s. Meanwhile Auditronics kept making a redesigned 110 for the broadcast market, but didn't call it a Grandson. This may or may not be the 110b, I'm a little fuzzy on that point.
Auditronics would refer to the modules and other components as being either 501 or 701, but the consoles by the channel/bus total, eg 532 or 740. People seemed to use the terms interchangeably, so my console can be called both a 701 or a 740.
As a sidenote, Auditronics printed the word "Memphis" prominently on the 500 and 700 consoles, leading people to think that was the model name. It wasn't, they just liked telling people they were from Memphis.
http://www.studiolaughingduck.com/wp-co ... 205932.jpg
Last edited by Manning on Wed May 15, 2013 11:19 pm, edited 2 times in total.
Manning Bartlett, Studio Laughing Duck, Glenorie NSW
http://www.studiolaughingduck.com
http://www.studiolaughingduck.com
-

Manning - Valued Contributor

- Posts: 1102
- Joined: Wed Sep 28, 2011 6:47 pm
- Location: Glenorie NSW
Re: Auditronics 110b 24 ch desk
right well next time your at my place you better read ALL of the vintage magazines i have .. lots and lots of audiotronics adds in them .. " good enough for donnie and marie .. good enough for you etc "
i will find one and post it up .. give me a tick
i will find one and post it up .. give me a tick
You do not have the required permissions to view the files attached to this post.
Rick O'Neil
I think we went to different schools together
turtlerockmastering.com
we listen
I think we went to different schools together
turtlerockmastering.com
we listen
-

rick - Moderator

- Posts: 3486
- Joined: Fri May 06, 2005 8:02 pm
- Location: Sydney
Re: Auditronics 110b 24 ch desk
Happy to be corrected, as always. And I'll gladly go through all your magazines. I have access to a very fancy corporate-level scanner - we should digitise them for posterity.
However, I'm pretty sure the 1972 ad you have is for a 110 Grandson (version 1). It had round fader knobs.

However, I'm pretty sure the 1972 ad you have is for a 110 Grandson (version 1). It had round fader knobs.

Manning Bartlett, Studio Laughing Duck, Glenorie NSW
http://www.studiolaughingduck.com
http://www.studiolaughingduck.com
-

Manning - Valued Contributor

- Posts: 1102
- Joined: Wed Sep 28, 2011 6:47 pm
- Location: Glenorie NSW
Re: Auditronics 110b 24 ch desk
Oh I wasn't correcting just commenting
..
There are a WHOLE bunch if auditronics desks that make
No sense to me in lineage
Open the website ...
..
There are a WHOLE bunch if auditronics desks that make
No sense to me in lineage
Open the website ...
You do not have the required permissions to view the files attached to this post.
Rick O'Neil
I think we went to different schools together
turtlerockmastering.com
we listen
I think we went to different schools together
turtlerockmastering.com
we listen
-

rick - Moderator

- Posts: 3486
- Joined: Fri May 06, 2005 8:02 pm
- Location: Sydney
Re: Auditronics 110b 24 ch desk
Well here's a brain dump of what (I think) I know so far about Auditronics.
Auditronics started in 1966 in Memphis - Welton Jetton and Steve Sage were the founders. They started out building custom, un-named consoles for Stax and Ardent studios.
With the success of Sam & Dave's "Soul Man" they received considerable interest in their consoles and started a proper factory.
Towards the end of the 60s they released the "Grand" - a 36 channel desk for 36 grand (1970's US dollars, about 4.2 trillion in today's money). They also released some smaller desks, under the "Grand" name, but I've never seen these.
In early 1973 they release the "son of Grand" - Grandson. The channel strips were marked as 110 series. There was a 16, and an 8 channel version (and possibly others). They pitched these at both the recording and the broadcast market.
In 1975 they released the Grandson II. I think this might be the 310 series, but I'm not absolutely sure.
The 500 and 700 series history is in my comment above. I am fairly certain that Disco Duck was produced entirely on an Auditronics console.
By the mid 80s they had fallen on hard times, they scaled back their factory and switched to only producing Broadcast consoles, such as the 220 and the 2600. In the late 80s or early 90s they were bought by Wheatstone, who still own them (not that you'd find much evidence of that fact on their website). Wheatstone made Auditronics branded products until around 2000.
In the early 2000s, Wheatstone sold the support rights and parts inventory to a company called Lightner, who still claim to support the consoles.
http://www.lightnerelectronics.com/auditronics.html
Auditronics started in 1966 in Memphis - Welton Jetton and Steve Sage were the founders. They started out building custom, un-named consoles for Stax and Ardent studios.
With the success of Sam & Dave's "Soul Man" they received considerable interest in their consoles and started a proper factory.
Towards the end of the 60s they released the "Grand" - a 36 channel desk for 36 grand (1970's US dollars, about 4.2 trillion in today's money). They also released some smaller desks, under the "Grand" name, but I've never seen these.
In early 1973 they release the "son of Grand" - Grandson. The channel strips were marked as 110 series. There was a 16, and an 8 channel version (and possibly others). They pitched these at both the recording and the broadcast market.
In 1975 they released the Grandson II. I think this might be the 310 series, but I'm not absolutely sure.
The 500 and 700 series history is in my comment above. I am fairly certain that Disco Duck was produced entirely on an Auditronics console.
By the mid 80s they had fallen on hard times, they scaled back their factory and switched to only producing Broadcast consoles, such as the 220 and the 2600. In the late 80s or early 90s they were bought by Wheatstone, who still own them (not that you'd find much evidence of that fact on their website). Wheatstone made Auditronics branded products until around 2000.
In the early 2000s, Wheatstone sold the support rights and parts inventory to a company called Lightner, who still claim to support the consoles.
http://www.lightnerelectronics.com/auditronics.html
Manning Bartlett, Studio Laughing Duck, Glenorie NSW
http://www.studiolaughingduck.com
http://www.studiolaughingduck.com
-

Manning - Valued Contributor

- Posts: 1102
- Joined: Wed Sep 28, 2011 6:47 pm
- Location: Glenorie NSW
Re: Auditronics 110b 24 ch desk
Thanks, Manning!
I hadn't seen the history put down anywhere clearly before.
Much appreciated.
Evan.
I hadn't seen the history put down anywhere clearly before.
Much appreciated.
Evan.
Evan Lorden, Well Worn Workshops, Melbourne
- EvLoutonian
- Registered User

- Posts: 234
- Joined: Wed Jun 09, 2010 12:46 pm
- Location: Melbourne
Re: Auditronics 110b 24 ch desk
Well there is still plenty I don't know.
The reason there were/are so many Auditronics consoles in Australia is due to some "as-yet-unknown" importer who I'm quasi-reliably told was based in Sydney. Someone here might know who that was (at the time I was busy finishing primary school).
Also I've never seen a photo of an Auditronics "Grand" - to be honest I'm not even certain they ever existed.
Also the difference between the 110, the 110a and the 110b is far from clear.
The reason there were/are so many Auditronics consoles in Australia is due to some "as-yet-unknown" importer who I'm quasi-reliably told was based in Sydney. Someone here might know who that was (at the time I was busy finishing primary school).
Also I've never seen a photo of an Auditronics "Grand" - to be honest I'm not even certain they ever existed.
Also the difference between the 110, the 110a and the 110b is far from clear.
Manning Bartlett, Studio Laughing Duck, Glenorie NSW
http://www.studiolaughingduck.com
http://www.studiolaughingduck.com
-

Manning - Valued Contributor

- Posts: 1102
- Joined: Wed Sep 28, 2011 6:47 pm
- Location: Glenorie NSW
Re: Auditronics 110b 24 ch desk
Indeed.
The only difference I can see between the 110 revisions is different colour knobs!
Haha but I dont have any circuit diagrams to look at. Do you have them, Manning?
The only difference I can see between the 110 revisions is different colour knobs!
Haha but I dont have any circuit diagrams to look at. Do you have them, Manning?
Evan Lorden, Well Worn Workshops, Melbourne
- EvLoutonian
- Registered User

- Posts: 234
- Joined: Wed Jun 09, 2010 12:46 pm
- Location: Melbourne
45 posts
• Page 1 of 2 • 1, 2
Return to For Sale / For Hire / Gear Wanted
Who is online
Users browsing this forum: No registered users and 14 guests