Page 1 of 1

FS: Tubetech LCA2B

PostPosted: Mon Apr 19, 2010 10:07 am
by Ben M
Hi Everyone

For sale is my Tubetech LCA2B all valve stereo/dual mono compressor/limiter.
The unit is in perfect working condition. Cosmetically - from memory I think there is a small paint scrape on the lid but otherwise she's a bewdy.
Always kept racked in my non smoking air conditioned studio.

For details - http://www.tube-tech.com/lca-2b-dual-channel-tube-compressor-15.html

$2300 ono
Image

If you'd like more photos please PM me and I'll take some more. Apologies for the photo. It's not the most flattering shot.

This is a blurb from their site
The TUBE-TECH LCA 2B is one of the most versatile and powerful compressors in the market.
The compressor is using a Tube as the VCA.( Voltage controlled amplifier.)

There's literally nothing the LCA 2B can't handle; From powerful bus compression to instrument and voice compression. Due to the LCA 2B's very fast and smooth attack ability, it's perfect for serious drum compression.

LCA2B is designed to be the TUBE-TECH Fairchild 670. It's NOT the same circuit, but it is designed with the Fairchild in mind, delivering similar action but sounding a bit more open.

The fixed attack/release constants are duplicates of the Fairchild constants. When you want even more control, power and wildness than our famous CL1B can deliver, try the LCA 2B.

The LCA2B is equally well suited for use in the studio or on the road.

The TUBE-TECH LCA 2B is a two-channel unit with an independent compressor and limiter per channel.

The unit is all tube based (except for the power supply and side chain circuit). The VCA (1 dual triode) is placed between the input transformer and the output stage (2 dual triodes).

The audio signal is picked up after the VCA and fed to the side chain circuit. The control signal from the compressor and from the limiter is combined and sent to the link switch and to the control amp, which feeds the VCA. The two bi-directional link busses are accessible at two 1/4" stereo jack sockets on the rear panel. The channels can be linked together for stereo applications and also linked to other LCA 2B's via the two link busses and a standard stereo jack/jack cord.

The compressor has six att/rel presets ( Fairchild time constants ) as well as manual control. The limiter att/rel is fixed. The LED display is fed from the control amp. The limiter LED is fed from the limiter buffer.The audio path is fully symmetrical from input to output. Input and output have fully floating transformers. All DC voltages are stabilized, except the anode voltage for the output stage.

Product Features

Compressor

Variable ratio from 1,6:1 to 20:1
Variable threshold: off to 10 dBu
Selection between six presets and manual controlled att/rel

Limiter

Variable threshold: off to 0 dBu
On/off switch
LED indication

General

Separate compressor and limiter
Frequency response @ -3 dB: 5 Hz to 50 Khz
Low noise: < -85 dBU @ 10 dB gain
Output gain control
Clickless bypass relay
LED display for gain reduction

PostPosted: Mon Apr 19, 2010 5:39 pm
by Ben M
Pardon me that was my future ebay price. For Trockers it's $2300. Updated. cheers

PostPosted: Mon Apr 19, 2010 8:16 pm
by 13thbeach
What about the Big 1A? I know a few people that would be after that little ripper! (not me just for the record).

PostPosted: Tue Apr 20, 2010 9:17 am
by Ben M
13thbeach wrote:What about the Big 1A? I know a few people that would be after that little ripper! (not me just for the record).


I just had it modded by Rob so I'm not letting that one go. Sounds great!

So Mat, what about a very nice stereo valve compressor/ limiter to go with your new Pacifica console? Mmmmmm dreamy.

:)

Tubetech LCA2B

PostPosted: Thu Jun 10, 2010 7:26 pm
by Ben M
Hi everyone

I'm bumping this again.

I would consider a trade for something interesting.

or make me an offer. :)

This unit is in very good order. All valve stereo comp/Lim.

Pictures as you need them. PM me here.


cheers
Ben

PostPosted: Thu Jun 10, 2010 11:31 pm
by rob
how is that BIG 1A going?

just finished modding another one of these and once again i'm impressed by what they do. They just make stuff sound so tough and solid and even extreme limiting just seems to work without penalties.

PostPosted: Fri Jun 11, 2010 9:37 am
by Ben M
anguswoodhead wrote:Trade for a BeesNeez Phelicty - she's basically brand new.


Thanks for the offer but not what I'm looking for.

rob wrote:how is that BIG 1A going?

just finished modding another one of these and once again i'm impressed by what they do. They just make stuff sound so tough and solid and even extreme limiting just seems to work without penalties.


Love your work Rob.

PostPosted: Sat Jun 12, 2010 9:42 am
by Ben M
Hi all

Thankyou for all the PM's and offers. Apologies for wasting your time but I'm taking this unit off the market for now.
I will contact people who PM'd in order if it goes back up for sale.


cheers
:)