Turtlerock Forum

I'm in the process of building a 2U rack containing 8 x BA Dual pres with metering, so the question is whether I cannibalise my current BA's for the tranny and 99V, or sell the unit as a going concern. So there's four of these pres in a 1U case

* Input transformer JLM 1:4
* Switched variable impedance (150, 300, 600, 1K2 and 2K4 off the top of my head)
* 99V opamp
* 48V pad and phase switches

Comes with JLM 48V supply.

Photo up soon (unless sold before hand).

Offers or swaps in the $1K2 ballpark - its about $800 worth of kit, plus the case and power supply adds another $100 or so, the rest is wires, sockets and assembly.

Any pics of the front and back of the unit would be greatly appreciated.
Cheers

Front:


Back:


Guts:


NOTE: The variable impedance has 4 positions, not 5 - no 150R, just 300, 600, 1K2 and 2K4

Hi Chris,

This uses the 99v and no output transformer so its unbalanced out correct?

M

Er, no. The output is balanced electrically. Refer to the schematic one the JLM site, and the strap across the IC pins technique for using a 99V with no transformer.

Oh, and the unit is SOLD. Sorry, should have posted that earlier.