For sale: AMEK TAC 9000 Series CHANNEL STRIPS
Posted: Wed Jun 02, 2010 3:57 pm2 channel strips, 2 fader strips, 1 master group and one master send strip.
Cannel strip has input for 2 mics (to compare setups) and line. Pad, phantom, etc.
EQ is 4-band, with adjustable Q and centre frequency. Q on hi and lo is reversible (gain curve or cut curve). Sweepable HPF. Each channel has 16 sends (pre/post and mute switches for each). I used these to send to any of 16 recording channels, in conjunction with the master aux panel.
Master group strip has 16 inputs with gain control. I used these for a 16-way headphone mix return. Didn't use much of the other functions.
Channel faders are P&G with mute, pfl, group sends, etc.
Main buss, pfl/afl, monitor and HP busses.
Rear connectors are standard DIN (32-way, I recall). I made up a home-made backplane (not included in sale - too ashamed of my messy layout), using opamp circuits from the schematics, out to a patchbay and panel with master volume, moitor and HP level controls.
Power supply not included, but it just requires a bog-standard +/- 15v and 48v phantom. Service and user manuals included.
Asking $800
Cannel strip has input for 2 mics (to compare setups) and line. Pad, phantom, etc.
EQ is 4-band, with adjustable Q and centre frequency. Q on hi and lo is reversible (gain curve or cut curve). Sweepable HPF. Each channel has 16 sends (pre/post and mute switches for each). I used these to send to any of 16 recording channels, in conjunction with the master aux panel.
Master group strip has 16 inputs with gain control. I used these for a 16-way headphone mix return. Didn't use much of the other functions.
Channel faders are P&G with mute, pfl, group sends, etc.
Main buss, pfl/afl, monitor and HP busses.
Rear connectors are standard DIN (32-way, I recall). I made up a home-made backplane (not included in sale - too ashamed of my messy layout), using opamp circuits from the schematics, out to a patchbay and panel with master volume, moitor and HP level controls.
Power supply not included, but it just requires a bog-standard +/- 15v and 48v phantom. Service and user manuals included.
Asking $800