Page 1 of 1

Raven Door Seals

PostPosted: Mon May 09, 2011 4:03 am
by Hookemeister
Clearing out some studio install bits & pieces. The following is all NOS (new old stock).

Raven RP38 Heavy Duty Automatic Drop Seals.

2 @ 1067mm They can be cut to fit any door width from 920mm to 1067mm. $65 each

3 @ 1220mm They can be cut to fit any door width from 1070mm to 1220mm. $75 each

2 @ 1500mm They can be cut to fit any door width from 1230mm to 1500mm. $85 each

These seals are fitted to the bottom of the door and seal is actuated when the door closes.

Details can be found here: http://www.raven.com.au/domino/raven/ra ... 3C00291772


Greg Hooke

Re: Sonex Acoustic Foam & Raven Door Seals

PostPosted: Mon May 09, 2011 5:08 am
by SteveL
PM'd you re the Sonex foam and tiles Greg.

Steve

Re: Sonex Acoustic Foam & Raven Door Seals

PostPosted: Mon May 09, 2011 3:41 pm
by DrAlienSmith
whats the price on the door seals, the 1067 ones?

Re: Sonex Acoustic Foam & Raven Door Seals

PostPosted: Wed May 11, 2011 1:36 am
by Hookemeister
Hi Angus

Sonex: Sorry but all the Sonex has been sold.

Door Seals: I'm guessing that the larger door overlaps the smaller door on all sides, if this is the case you would only need one drop seal.

Thanks

Greg Hooke

Re: Sonex Acoustic Foam & Raven Door Seals

PostPosted: Wed May 11, 2011 1:42 am
by Hookemeister
Hi Al

The 1067mm RP38 is $65 but I noticed you're in WA so it might be cost prohibitive to post it over from Sydney.

Packed weight would be around 2kg.

Thanks

Greg Hooke