Turtlerock Forum

Hi Guys,

I am clearing out a lot of old equipment that we have been hoarding here at JMC for many years now.
These items are priced to sell, I'm not looking to make a huge profit.
I just need to get rid of these items and thought some of these things may be desireable!
All prices are in $AUD.

Instead of PM'ing me please send all contact directly to: pholz (at) jmc (dot) edu (dot) au

I am also very open to offers, just contact me and we'll sort something out.

All of this gear is located in Surry Hills, Sydney.
I will consider shipping for some of the smaller items.
Feel free to contact me if you want to come and inspect anything as well.

Also there are other bits of equipment that I will be listing periodically so stay tuned.

Here is a link to a photo overview of each item: http://s1231.photobucket.com/albums/ee510/jmcsydney/
Each item is presented individually below as well.


Comp / Pre / EQ:


be!@#$%^& Mono Parametric EQ - http://s1231.photobucket.com/albums/ee5 ... TRIC%20EQ/
$30
This unit works, missing a knob or two.

Valley Audio 401 Mic pre/ Comp / EQ - http://s1231.photobucket.com/albums/ee5 ... DIO%20401/
$150
Unit powers up but does not respond to signal, could be brought back to life!

Valley Audio Rack - http://s1231.photobucket.com/albums/ee5 ... IO%20RACK/
$700
Unit powers up, the power switch will however not turn it off!
Modules included:
-Kepex II
-Gain Brain II
-Maxi Q
-Leveller
-Commander
-DSP
The unit works however the Kepex doesn't seem to act on the signal.


Consoles:


Euphonix CS-2000 - http://s1231.photobucket.com/albums/ee5 ... 20CS-2000/
$2500
24ch.
These photos are from just before the console was de-commisioned.
This unit was de-commisioned in 2006 and is currently packed away.
All of the channels are in boxes as are the modules.
This includes the console frame, tower, computer, misc cabling and also a few 96pt TT-ELCO patchbays.
There are 8 channels of dynamics with this one. ***DYNAMICS SOLD***

Ta@#$% M-2600 32 - http://s1231.photobucket.com/albums/ee5 ... 0M2600-32/
$200
This includes the power supply.
This console has some missing faders and is not in working condition. Could be useful for parts / spare PSU.

be!@#$%^& Eurorack mixer - http://s1231.photobucket.com/albums/ee5 ... 0EURORACK/
$20
I have two of these however only one power supply.


Digital:




Ta@#$% IF-TAD (TDIF-ADAT Converter) + CD8-TDII (Yamaha TDIF CARD) - http://s1231.photobucket.com/albums/ee510/jmcsydney/
$250
This includes a Ta@#$% TDIF Cable (DB-25) and power supply.
Units are working.


Misc:


Ta@#$% Remotes - http://s1231.photobucket.com/albums/ee5 ... 20REMOTES/
$5 each.
Units are sold as is:
Ta@#$% RC-30D
Ta@#$% RC-50D
Ta@#$% RC-701 Remote
Ta@#$% RC-88 ***SOLD***
Ta@#$% RM-08 (rackmount kit)

Acecad Digital Tablet - http://s1231.photobucket.com/albums/ee5 ... %20TABLET/
$10 each.
I have 15 of these.

Apitek Digital Tablet - http://s1231.photobucket.com/albums/ee5 ... %20TABLET/
$10 each.
I have 10 of these.

be!@#$%^& PX-2000 48pt TS patchbay - http://s1231.photobucket.com/albums/ee5 ... 20PX-2000/
$10 each.
There are 7 of these, please note these patchbays are unbalanced.

Ta@#$% 130 Cassette - http://s1231.photobucket.com/albums/ee5 ... 0CASSETTE/
$40 each.
I have 3 of these. Sold as is.



Sold:


be!@#$%^& PRE-Q 2 channel microphone preamp - ***SOLD*** http://s1231.photobucket.com/albums/ee5 ... R%20PRE-Q/
$30
This unit is working.

Dolby SR-24 w/PS3 ***SOLD***
- http://s1231.photobucket.com/albums/ee5 ... OLBY%20SR/
$500
This unit was de-commisioned long before I came to JMC. It includes the PS3 power supply unit.
I also have a breakout connector that splits to XLR's on Canare loom and other power cables and etc. for this.
This item is sold as is.

Dolby SRP-24 w/PS3 ***SOLD***
- http://s1231.photobucket.com/albums/ee5 ... LBY%20SRP/
$500
This was in use with our Studer up until 2006. Unit is sold as is.

Fostex PB-32H Patchbay ***SOLD*** - http://s1231.photobucket.com/albums/ee5 ... PATCHBAYS/
$10 each.
I have two of these.

FX Gates ***SOLD*** - http://s1231.photobucket.com/albums/ee5 ... X%20GATES/
$50
This price is for all 3. They are mounted to a rack shelf and are in working condition. PSU not included.
Ta@#$% M-08 12ch - http://s1231.photobucket.com/albums/ee5 ... am%20M-08/
$45 each.
There are 4 of these and they are all working.

Ta@#$% DA-38 8ch DAT ***SOLD***
- http://s1231.photobucket.com/albums/ee5 ... M%20DA-38/
$40 each
I have 8 of these.
Units are sold as is. I also have a stash of Ta@#$% cables (d-sub etc..) that can go with these.

Ta@#$% DA-88 8ch DAT ***SOLD***
- http://s1231.photobucket.com/albums/ee5 ... M%20DA-88/
$50 each.
I have 2 of these. Units are sold as is.

Ta@#$% MU-8824 Meter **SOLD** - http://s1231.photobucket.com/albums/ee5 ... 4%20METER/
$25
Unit is sold as is.



Valley Audio 730-LT stereo digital compressor - http://s1231.photobucket.com/albums/ee5 ... %20730-LT/
$250
Unit powers up and passes audio. Interesting guy. (ON HOLD)

Ta@#$% M-3500 - http://s1231.photobucket.com/albums/ee5 ... %20M_3500/
$350
This includes the power supply.
The console is fully functional however there are some intermittent issues with a few of the channels, usually gotten over by twisting line amps wildy etc...


Ta@#$% ES-50 Sync - http://s1231.photobucket.com/albums/ee5 ... 50%20SYNC/
$30
Unit is sold as is. I will include the ES-51 Sync controller too: http://s1231.photobucket.com/albums/ee5 ... ONTROLLER/
I also have some cables that go with this.

Ta@#$% ES-61 - http://s1231.photobucket.com/albums/ee5 ... M%20ES-61/
$20
Unit is sold as is.



I am also selling a load of Groove Tubes - check out this thread: viewtopic.php?f=2&t=4778&p=41937#p41937

Thanks!

sorry, euphonix updated.

i will buy the dynamics as is for the updated difference peat !

the 110 thing makes it a drag ( and i already have such a drag in my life ) or i would probably grab the console for more spares as well but i think i will pass on the console for that price ( which on one hand is a bargain ) on the other .....

no worries rick!

I'll dig around through the boxes tomorrow and hunt down those dynamics.
Will let you know how i go!

Fostex patchbays gone.

added Ta@#$% M-08 mixers.

Any idea if the Ta@#$% 2600s could be Frankensteined into one working 24 or 32 channel desk?

Possibly, I think the channels are in groups of 4.

I could do you a deal on both of them if you want them.

Updated a few things and added the Ta@#$% IF-TAD converter.

Hello,
I live in the US. Could I pay you through PayPal for the rc-88 remote? I have been looking for one for a while.

I found this post by doing a search on google.

Maybe you could check shipping cost if you are willing to ship it here. My zip code is 78751 in the US. (Austin, Texas)

Would be very grateful if you would be willing to ship it to me.

my website: irahenderson.com ... just so you know I am a real person. my ebay id is "sluggie64" if that helps at all too. thanks,

Ira

Hi Ira,

Thanks for your inquiry.

I think I could probably get it to you using Australia Post Air Mail for about $45 in total.

Please send me an email to pholz(at)jmc(dot)edu(dot)au and we will talk further.

-Peter

Hi Guys,

Have just updated this,

I've added our Ta@#$% M-3500 which has just been decomissioned.
It is basically fully working except for a few intermittent problems with a few of the channels.

Let me know if you want any of these items!

-peat

The Ta@#$% M-3500 and M-3700 consoles are now happily in my studio!

Thanks Pete

Kris,

No worries at all mate, glad they worked out.
Any info or photos?

No photos worth looking at just yet. I'll post some when I get it all organised. I've been busy replacing all the OPamps with OPA2604, OP275, OPA2132 and NE5532 chips. Fixed a couple of connections on the M-3700 too which is handy. I'm about to start recording an EP for local band duckPuppy so I had better get cracking!

It's been a while but here's a photo of the M-3700 in my WIP studio. My old man's helping me build a custom desk for it next weekend + a panel to put in front of that tin.

Not sure where your photo went... I can't see it.

http://i1188.photobucket.com/albums/z413/Krisbo_ench/DSC_0179.jpg

That's where I am now. I've re-chipped and replaced all caps in the master section and I've re-chipped 16 channels so just 16 to go. And I can't wait to get the front re-upholstered!

Once the desk is built I'll re-locate the console to a better location.

Cool Enchilada... but who are you (other than a tasty mexican morsel wrapped in corn leaves)? You'll note that the rest of us have our name/location in our signatures...

myles

Done

wouldnt mind one of those cassette decks which has the faintest of the (three units) brown stripes on the pinch rollers...