Page 1 of 1

WTB: Mac RS-422 Serial Cable for Chaining AMT8 and Unitor8

PostPosted: Sat Jul 07, 2012 1:35 pm
by ether
Hi all.

I've picked up a second hand Emagic Unitor 8 MK II MIDI unit to chain to my current AMT 8, but I need to find the appropriate RS-422 serial cable to link them.

Does anyone have one of these lying around I can buy? Covered in dust, in a boxful of old Mac bits maybe?

They have small, 8-pin round ends, like this:

http://www.gearslutz.com/board/electron ... r-8-a.html

Cheers,

Re: WTB: Mac RS-422 Serial Cable for Chaining AMT8 and Unito

PostPosted: Sun Jul 08, 2012 4:20 pm
by AMAC
I might have one - will have a look.
Andrew

Re: WTB: Mac RS-422 Serial Cable for Chaining AMT8 and Unito

PostPosted: Mon Jul 09, 2012 10:34 am
by Ben M
Let me know if Andrew doesn't have one. I may have a couple hanging around.

Re: WTB: Mac RS-422 Serial Cable for Chaining AMT8 and Unito

PostPosted: Mon Jul 09, 2012 2:24 pm
by ether
Thanks Andrew and Ben. Appreciated.

I'm more than happy to pay whatever's reasonable for the cable, plus postage. I'll take more than one as well, for spares.

Cheers,

Re: WTB: Mac RS-422 Serial Cable for Chaining AMT8 and Unito

PostPosted: Tue Jul 10, 2012 8:20 pm
by Hybrid88
Perhaps also try the local reuse/tip shops? They always seem to have box's of old computer bits and pieces.

AJ, just curious what chaining them together does? I have two AMT8's but would you need one to be the Unitor 8 to provide the clock or? :-?

Re: WTB: Mac RS-422 Serial Cable for Chaining AMT8 and Unito

PostPosted: Tue Jul 10, 2012 11:44 pm
by AMAC
mmm ... well I thought I had one but I might have chucked it in the last move. Strange though, I still have the old Mac and the Opcode Studio 5!

Andrew

Re: WTB: Mac RS-422 Serial Cable for Chaining AMT8 and Unito

PostPosted: Wed Jul 11, 2012 12:36 am
by HA_DA_JA
Opcode Vision software took years off my life that I will never get back.
Very frustrating times.

Re: WTB: Mac RS-422 Serial Cable for Chaining AMT8 and Unito

PostPosted: Fri Jul 13, 2012 2:16 pm
by ether
Hybrid88 wrote:AJ, just curious what chaining them together does? I have two AMT8's but would you need one to be the Unitor 8 to provide the clock or?


I'll tell you if I ever get them chained together :)

The manual says the two units will appear as a single 16 x 16 MIDI interface, and I assume there'll be some clock distribution magic.

No luck on a cable so far. Thanks all that looked. Might have to improve my soldering skills...

Re: WTB: Mac RS-422 Serial Cable for Chaining AMT8 and Unito

PostPosted: Fri Jul 13, 2012 11:36 pm
by gigpiglet
hey AJ

i have one of those here i believe
and I'm just around the corner (on phillip st)
if you are around over the weekend - just drop me a line gareth@gigpiglet.com.au and you can come done and check out the place and find a cable in the mac box of doom... no charge.

Re: WTB: Mac RS-422 Serial Cable for Chaining AMT8 and Unito

PostPosted: Mon Jul 22, 2013 11:53 pm
by Hybrid88

Re: WTB: Mac RS-422 Serial Cable for Chaining AMT8 and Unito

PostPosted: Fri Aug 02, 2013 5:23 pm
by casey_rice
I probably have one or more. Let me know if you haven't acquired them yet.

Casey