Ok so the departure date is looming and almost all the stuff is sold/packed/on loan etc. The other thread was getting crowded so here is all the stuff that is left plus a couple of extra goodies.
Neumann/Gefell M582 pair with m62 capsules (cardioid) with power supplies and cables. Excellent example of these awesome mics, both fully cleaned, serviced and recapped by Siegfried Thiersch within the last 18 months and sounding very sweet. I love these on drum overheads, acoustic guitar, piano, rooms, in fact just about everything I've used them on. You can hear them in the recent SDC shoot out (they are incorrectly listed as m582/m94 capsule, its the same capsule with a different mount) where they compare very favourably with the KM54/56. I've got 5 of these, so I can let two go but I wouldn't be selling otherwise. PRICE DROP to $1900 for the pair plus shipping and no I don't want to split them up. SOLD
Astor EQ. Vintage inductor based eq module. fixed hi and lo bands with a boost only presence filter. Got three of these from Rick and two are racked up and sounding very sweet. I didn't use this one because it has a nice faceplate and the other two I made new faceplates for. Very similar to the Neumann PEV modules but can't confirm that they are the same design. Transformer i/o and fully discrete, I was going to slip this into a rack with a 312 preamp for a channel strip. $250
- It is currently Fri Jul 31, 2026 6:48 am • All times are UTC + 10 hours [ DST ]
last bits to go... mics, UAD, etc.
Moderators: rick, Mark Bassett
10 posts
• Page 1 of 1
last bits to go... mics, UAD, etc.
You do not have the required permissions to view the files attached to this post.
Last edited by mylesgm on Fri Jul 27, 2012 6:48 pm, edited 5 times in total.
Myles Mumford
Producer/Composer/Engineer/Sound Artist
Making records in sunny Melbourne
www.mylesmumford.com
Producer/Composer/Engineer/Sound Artist
Making records in sunny Melbourne
www.mylesmumford.com
-

mylesgm - Valued Contributor

- Posts: 1964
- Joined: Mon Feb 09, 2009 6:48 pm
Re: last bits to go... mics, UAD, etc. MORE ADDED
Ok found a few more things in boxes so check out these little 'gems'.
AKG N46E Power supply. Original power supply for 414 and 451 mics with bass roll off. Can of course be used for any phantom power microphones. Sadly I put this in a box ages ago and a mouse got in to the box and chewed the cord a bit and that will now need to be replaced. It was fully functioning when I put it in the box but I've priced it accordingly. $50
2x M-Audio Nova mics. Don't know why I have these, but found them in a box and I certainly don't need them so away they go. Good for putting on toms or similar in case they get hit or you could use them as cases for DIY mic or hey they might become your favourite mics. Whatever I haven't tested them and can't ever remember using them so $50 each.
Vintage Lomo hand held dynamic mic. Looks really cool with its crazy metal grill and comes in a neat little wooden case. No idea where I got it or when but I do remember using it so I expect it to work. $90
Technics SP-10 Turntable manual and remote control. Full technical manual with full size drawings to build plinth to house the turntable. Cute original remote control which was working when I last used it. Surely somebody has an SP-10? $10
AKG N46E Power supply. Original power supply for 414 and 451 mics with bass roll off. Can of course be used for any phantom power microphones. Sadly I put this in a box ages ago and a mouse got in to the box and chewed the cord a bit and that will now need to be replaced. It was fully functioning when I put it in the box but I've priced it accordingly. $50
2x M-Audio Nova mics. Don't know why I have these, but found them in a box and I certainly don't need them so away they go. Good for putting on toms or similar in case they get hit or you could use them as cases for DIY mic or hey they might become your favourite mics. Whatever I haven't tested them and can't ever remember using them so $50 each.
Vintage Lomo hand held dynamic mic. Looks really cool with its crazy metal grill and comes in a neat little wooden case. No idea where I got it or when but I do remember using it so I expect it to work. $90
Technics SP-10 Turntable manual and remote control. Full technical manual with full size drawings to build plinth to house the turntable. Cute original remote control which was working when I last used it. Surely somebody has an SP-10? $10
You do not have the required permissions to view the files attached to this post.
Myles Mumford
Producer/Composer/Engineer/Sound Artist
Making records in sunny Melbourne
www.mylesmumford.com
Producer/Composer/Engineer/Sound Artist
Making records in sunny Melbourne
www.mylesmumford.com
-

mylesgm - Valued Contributor

- Posts: 1964
- Joined: Mon Feb 09, 2009 6:48 pm
Re: last bits to go... mics, UAD, etc.
price drops... I'd really like to see these go so make a reasonable offer.
Myles Mumford
Producer/Composer/Engineer/Sound Artist
Making records in sunny Melbourne
www.mylesmumford.com
Producer/Composer/Engineer/Sound Artist
Making records in sunny Melbourne
www.mylesmumford.com
-

mylesgm - Valued Contributor

- Posts: 1964
- Joined: Mon Feb 09, 2009 6:48 pm
Re: last bits to go... mics, UAD, etc.
Hi Myles, the Astor Eq looks interesting, do you have pin outs and schems?
Cheers,
Paul
Cheers,
Paul
- Paul Maybury
- Frequent Contributor

- Posts: 705
- Joined: Tue Nov 17, 2009 3:07 pm
- Location: Melbourne
Re: last bits to go... mics, UAD, etc.
Hi Paul,
Yes I have pin outs for the astor. Jim refurbished one of the modules for me (dead transistor) and they sound excellent.If you want it I can drop it off this weekend.
Yes I have pin outs for the astor. Jim refurbished one of the modules for me (dead transistor) and they sound excellent.If you want it I can drop it off this weekend.
Myles Mumford
Producer/Composer/Engineer/Sound Artist
Making records in sunny Melbourne
www.mylesmumford.com
Producer/Composer/Engineer/Sound Artist
Making records in sunny Melbourne
www.mylesmumford.com
-

mylesgm - Valued Contributor

- Posts: 1964
- Joined: Mon Feb 09, 2009 6:48 pm
Re: last bits to go... mics, UAD, etc.
Hi Myles, I'll be in the studio on Monday mixing from 3pm if you want to swing by. I'll make you a black tea.
Cheers,
Paul
Cheers,
Paul
- Paul Maybury
- Frequent Contributor

- Posts: 705
- Joined: Tue Nov 17, 2009 3:07 pm
- Location: Melbourne
Re: last bits to go... mics, UAD, etc.
hey Paul I'll be in Tas on monday but I could do sunday.
Myles Mumford
Producer/Composer/Engineer/Sound Artist
Making records in sunny Melbourne
www.mylesmumford.com
Producer/Composer/Engineer/Sound Artist
Making records in sunny Melbourne
www.mylesmumford.com
-

mylesgm - Valued Contributor

- Posts: 1964
- Joined: Mon Feb 09, 2009 6:48 pm
10 posts
• Page 1 of 1
Return to For Sale / For Hire / Gear Wanted
Who is online
Users browsing this forum: No registered users and 7 guests

