SOLD - pls delete
Hi all,
Selling this unit due to a change in direction:
Ta@#$% x48 hard disk recorder
- upgraded with 240GB SSD and clean build (power up to record-ready now takes 1 min)
- including 3 x DB25-DB25 cables (TDIF)
- including the original HD also with a clean build + build CD and printed manual
- this is a 4RU rack unit (or shelf or desktop) and is quite heavy
NOTE - the front panel has 48 record enable buttons - one per channel each with an "active" LED. The 8 LEDs on bank 3 (channels 17-24) are not illuminating on the x48 front panel but the switches do function as you can see record enable illuminated on the software application that runs on this box. All of the other LEDs / meters / switches on the x48 are functioning fine. I suspect this may just need the connector reseated but I don't want to pull the front panel off - more techo types may enjoy that job ;-)
Selling this unit due to a change in direction:
Ta@#$% x48 hard disk recorder
- upgraded with 240GB SSD and clean build (power up to record-ready now takes 1 min)
- including 3 x DB25-DB25 cables (TDIF)
- including the original HD also with a clean build + build CD and printed manual
- this is a 4RU rack unit (or shelf or desktop) and is quite heavy
NOTE - the front panel has 48 record enable buttons - one per channel each with an "active" LED. The 8 LEDs on bank 3 (channels 17-24) are not illuminating on the x48 front panel but the switches do function as you can see record enable illuminated on the software application that runs on this box. All of the other LEDs / meters / switches on the x48 are functioning fine. I suspect this may just need the connector reseated but I don't want to pull the front panel off - more techo types may enjoy that job ;-)