SOLD: DBX900 rack

Posted:
Sun Jan 27, 2013 12:33 pm
by Sammas
The usual suspect. Comes loaded with 7x 903 compressors and 2x 904 gates. There is also a spare 904 gate as well... So 10 modules in total... and 1 nine space rack with internal PSU. Its a bit scratched up with a bunch of rack rash, but when rack mounted looks fine. There is an added patch panel on the back to give you XLR & 1/4" i/o. It is easily removed through (actually the bottom half is just attached with a piece of gaffa tape) to reveal the usual screw terminals.
Chasing $650 ONO. Shipping nationwide for $22.00. Or pickup in Sydney.
Re: FS: DBX900 rack

Posted:
Thu Jan 31, 2013 8:52 pm
by Sammas
Hey gents,
I've had a bunch of enquiries about this. I have just tested the main inputs and outputs on all channels and models (I haven't tried any off the detector inputs...).
All modules function well. None have scratchy pots (I am not entirely convinced any pot is in the audio path, I actually think they might all be in the side chain circuit).
The one problem I did note was one gate module seems to be suffering some crosstalk from other channels. IE: when a kick is plugged into the channel next to it, you can see the meter on the gate moving in time. This is module specific. I swapped it for the space gate module and all 9 work nicely.
Photos:
https://www.dropbox.com/s/y99kh3l8rtabw ... .10.25.jpghttps://www.dropbox.com/s/ar2c5vdg7hu4h ... .11.02.jpghttps://www.dropbox.com/s/ljrtj3e1abj87 ... .11.27.jpg