For trade?
Posted: Fri Mar 22, 2013 11:26 amI collected a few bits and pieces, some might be good, some is probably useless shit, before I was able to admit that I am not capable of (or driven enough to learn how) to fix/modify them.
I have 4 options. In descending order of preference:
Pair of Akai M7s
The "simple" mods to cenvert them to dual pre's is way beyond me.
Altec Lansing 1598B (and a pair of high gain modules)
The plan was to add phantom power and something like the JLM go between. Once again, beyond me.
PKE ECMS-03 (not even sure what it's meant to do but it looked cool and was cheap)
Has big VUs in it....
There's also an old portable valve reel-reel buried in a cupboard somewhere along with a Shure automix mic preamp (apparently the pre's are not bad if you can modify it to tap a line out of each one and defeat the logic circuit. I can't)
I have 4 options. In descending order of preference:
- Give someone much more capable than me the whole lot in exchange for something I can actually use
- Give someone much more capable than me the whole lot in exchange for them making the 1598B useful for me
- Give the whole lot to someone
- Bin the whole lot
Pair of Akai M7s
The "simple" mods to cenvert them to dual pre's is way beyond me.
Altec Lansing 1598B (and a pair of high gain modules)
The plan was to add phantom power and something like the JLM go between. Once again, beyond me.
PKE ECMS-03 (not even sure what it's meant to do but it looked cool and was cheap)
Has big VUs in it....
There's also an old portable valve reel-reel buried in a cupboard somewhere along with a Shure automix mic preamp (apparently the pre's are not bad if you can modify it to tap a line out of each one and defeat the logic circuit. I can't)