Got a for more items on the go here:
There are higher res pictures here along with some more shots:
http://s12.photobucket.com/user/deskman/library/FS1
SSL 502's and 505's:
The SL502 is a 4-band semi parametric EQ module.
The SL505 is a dual line input module with input level control, HPF and LPF, insert point and output control.
The best way to rack these up would be to have your balanced line I/O feeding the SL505 with the unbalanced SL502 on the insert point of the SL505.
This way you would have balanced I/O, input and output control, filters and a 4 band eq.
$300 for a 505/502 pair or $500 takes the lot.
Road Ready 3RU road case: << ON HOLD
This unit is super solid and has rack rail on the front and the back
Good condition and fairly new/unsused.
$100
DSE Pre/Eq:
Simple pre/eq which can run off battery or external PSU
$10
Yamaha CDR1000:
This is a professional rackmount CD player/recorder.
It has s/pdif and AES/EBU I/O along with balanced analogue.
It also features Apogee UV22 Dither
$150
- It is currently Wed Jul 29, 2026 6:37 pm • All times are UTC + 10 hours [ DST ]
FS: EQ Modules, Road Case, CD Player
Moderators: rick, Mark Bassett
9 posts
• Page 1 of 1
FS: EQ Modules, Road Case, CD Player
You do not have the required permissions to view the files attached to this post.
Last edited by peat on Thu Jan 16, 2014 11:32 am, edited 7 times in total.
Peter Holz
www.peterholz.com
www.peterholz.com
-

peat - Regular Contributor

- Posts: 381
- Joined: Mon Nov 06, 2006 6:19 pm
- Location: Sydney
Re: FS: EQ Modules, Road Case, CD Player, Sansamp
RCA BE-100 EQ modules in channel:
Simple EQ module in channel including an RCA opamp card and painton fader
See more pictures link for inside of the channel. I have two of these
Also see this link for some more info regarding these: http://www.preservationsound.com/?p=51
$150 each
ADM 1540 EQ modules including card connector:
These are the ones Greg was selling a while back, I never got around to racking them.
$300 for the pair
Sony MXP3000 Channel EQ's:
These are from an MXP 3000 console.
They have an unbalanced i/o and require +/- 15v.
I have the schematics and pinouts for these too.
$60 each (4 semi parametric, 4 dual concentric parametric, 1 graphic)
or $500 takes the lot - some of them might need some re-capping etc.
Simple EQ module in channel including an RCA opamp card and painton fader
See more pictures link for inside of the channel. I have two of these
Also see this link for some more info regarding these: http://www.preservationsound.com/?p=51
$150 each
ADM 1540 EQ modules including card connector:
These are the ones Greg was selling a while back, I never got around to racking them.
$300 for the pair
Sony MXP3000 Channel EQ's:
These are from an MXP 3000 console.
They have an unbalanced i/o and require +/- 15v.
I have the schematics and pinouts for these too.
$60 each (4 semi parametric, 4 dual concentric parametric, 1 graphic)
or $500 takes the lot - some of them might need some re-capping etc.
You do not have the required permissions to view the files attached to this post.
Last edited by peat on Thu Jan 16, 2014 11:33 am, edited 1 time in total.
Peter Holz
www.peterholz.com
www.peterholz.com
-

peat - Regular Contributor

- Posts: 381
- Joined: Mon Nov 06, 2006 6:19 pm
- Location: Sydney
Re: FS: EQ Modules, Road Case, CD Player, Sansamp
Peat..could I take the sans amp please ?
Cheers
Cheers
John NYMo Nyman
Not too old to Rock n Roll...not too young to die !
Not too old to Rock n Roll...not too young to die !
- NYMo
- Valued Contributor

- Posts: 1023
- Joined: Sat May 07, 2005 1:54 pm
- Location: Sunshine Coast Queensland
Re: FS: EQ Modules, Road Case, CD Player, Sansamp
sansamp and one pair of SSL's on hold.
Very much open to offers here.
Very much open to offers here.
Peter Holz
www.peterholz.com
www.peterholz.com
-

peat - Regular Contributor

- Posts: 381
- Joined: Mon Nov 06, 2006 6:19 pm
- Location: Sydney
-

cLoudBase - Registered User

- Posts: 55
- Joined: Mon Sep 13, 2010 4:53 pm
- Location: Sunshine Coast, Queensland
-

peat - Regular Contributor

- Posts: 381
- Joined: Mon Nov 06, 2006 6:19 pm
- Location: Sydney
-

Hybrid88 - Frequent Contributor

- Posts: 514
- Joined: Mon Feb 16, 2009 3:51 pm
- Location: Launceston, Tasmania.
9 posts
• Page 1 of 1
Return to For Sale / For Hire / Gear Wanted
Who is online
Users browsing this forum: No registered users and 17 guests

